NIT No. 10 Item No. 10 (22-23) EE (T)/ACE

Supply of PVC insulated PVC sheathed, copper conductor( flexible) cable, Size 3 core x 6 Sq mm ,1100 Volts, conforming to IS 694. Make:- Havells/Finolex/DJB approved make

Supply of LT Power Aluminum cable, solid conductor, XLPE insulated, PVC sheathed, armoured 650/1100 volts, as per IS 7908 (Part-I), 1988 size3.5x25 sq. mm. Make:- Havells/ Gloster/ Grandley/ DJB approved make

Supply of G.I. tail piece medium class of 0.5 mtrs long including one end flanged and other end threaded of 80mm dia.

Supply of 80mm dia. GI Bend with both side flanges duly welded.

Pressure Gauge of 150mm dia. size having required range with accessories such as GI fittings, Bib cock etc. required complete the work. Make:-Hguru/fibeg./DJB approved make.

Supply of M.S. Clamp of MS strip duly hole for holding the pipe of 80mm dia. with nut bolts and washer.

Supply of M.S. Bore cover made out of MS plate suitable for 10” dia. bore complete with suitable hole for passing the 80mm dia. GI Pipe

Supply of CI. D.F. non rising spindle sluice valve, PN 1.0 Size 80 mm dia. Make:- Kirloskar/ IVC/VAG

Supply of CI, D.F. swing check NRV.P.N. 1.0 Size 80 mm dia. Make:- Kirloskar/ IVC /VAG

Supply of Nut Bolts,Washer,Spring of sizes

Supply of rubber mat for electrical purpose of size 1M X 2M and 12.5 mm thick. Make: - Jyoti/DJB approved make

Supply of fresh air ventilating fan 300 mm. Make: Havells/Crompton/Bajaj/ Khaitan/Usha. DJB SOR(E&M)-20.2.1

Supply of ceiling fan 1200 mm sweep. Make: Havells/Crompton/Bajaj/ Khaitan/Usha. DJB SOR(E&M)-20.1.2

Supply of kit kat board made out of wooden having 3 Nos. 100 Amp (415 volts re-wireable) kit kat of Havells/Standard /L&T make.

Supply of electronic dozing pump (6 LPH, 10 Bar) electrically operated 230 volts, 50 Hz supply chemical grade tank of 100 Ltrs. with pipe etc. Make: - Milton Roy/ Clomax/DJB approved make.

Supply of 80mm dia. B class GI pipe length 3 Mtr. With duly Welded flange in both sides, complete with cutting of flange for cable and welded support in both flanges. Make: - Jindal/ Parkash/ Surya/Tata.

Fabrication/ Supply of venturi assembly 80 mm dia. with complete accessories as required at site.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with b1.5 Sq. mm,FRLS PVC insulated copper conductor single core cable etc. as required. (DJB SOR item no. 31.1/1.1)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (DSR E&M 2014 item no. 1.41)

Supplying and fixing 6 way, Double door , single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (DJB SOR item no. 2.3.5)

Supplying and fixing 63 Amp rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (DJB SOR item no. 2.12.2)

Supplying and fixing single pole, 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required. (DSR E&M 2014 item no. 2.10)

Installation, testing and commissioning of Ceiling Fan, including wiring the down rods of standard length( upto 30 Cm.) with 1.5 sq.mm FRLS PVC insulated copper conductor cable single core cable including providing and fixing Phenolic laminated sheet cover on the fan bos etc. as required. (DSR E&M 2014 item no. 1.45)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DJB SOR item no. 5.2)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm. (DJB SOR item no. 5.9))

Workmanship Charges for lowering/lifting the submersible pump set into deep well, Fixing/Erection/Installation of E&M equipments, accessories, testing and commissioning on load with satisfactory functioning of Pump. The work includes all sundry required items for completion of work, i.e. eccentric taper, rubber gasket, necessary reinforcement and vibration isolation arrangement,etc. and loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions. The tube well will be commissioned on automation mode and timing to be set as per direction of Engineer-in-Charge. The all sundry items which are useful & necessary for operation of Tube well in automation mode shall be deemed to have been included, whether such items are specially in specifications or not.

HYDROCON ENGINEERS