Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹68.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹69.3 L+₹58,426 (0.85%)Rejected-Finance | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹70.5 L+₹1.8 L (2.67%)Rejected-Finance | L3 | Rejected-Finance HIGHER BIDDER |
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
25 Mar 2022, 5:30 pmClosed
EXECUTIVE ENGINEER NADIA DIVISION PHE DTE.
DC BUILDING FIRST FLOOR KALYANI NADIA
Making internal arrangement and decoration of proposed video conference room and other allied works at the 2nd floor of new office building under Nadia Division, PHE Dte, Kalyani, Nadia
2022_PHED_369619_1
WBPHE_Q_07_ND_2021_22
Open Tender
CIVIL WORKS
Item Rate
30 days
KALYANI NADIA
PRE QUALIFICATION DETAILS
4 documents required · 4 mandatory
₹1.3 L
6 Jun 2022
7 Mar 2022
28 Mar 2022
7 Mar 2022
25 Mar 2022
7 Mar 2022
Amount
Providing and fixing of false ceiling (straight/ curved/ necessary multilayer vertical drops as and when required depending upon the architectural aspect) made with 12.5 mm thick plaster of paris board including G.l. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.l. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.l. ceiling angle of size 25 mmx10mmx0 .55 mm thick fixed to the ceiling with G.l. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connect ing clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick plaster of paris board are to be fixed under ceiling section as above by machine screws . The boards are to be joined and finished with jointing compound , paper tape and application of top coat etc. including cutting pockets for fixing of electrical and other fixtures and same 1s mending good with decortive beads etc. after fixing the fixtures in proper position as per the approved design, drawing and direction of Engineer-in-charge . (The rate includes of cost of all materials including taxes, cost of accessories , fittings and fixtures,scaffolding , labour charges and any other incidental charges etc. completein all respect)
Extra for providing wooden decorative work at ceiling with 12mm thick boiling water proof ply conforming to IS 303-1989 bonded with phenol formaldehyde resin conforming to IS-848-1974 ofapproved make over the supporting frame work of false ceiling finished with 3mm thick veneer of variety wenge/sapeli/white koto/cedar etc. of approved make over the ply base including the cost of cealer matt polish as per approved design, drawing and direction of Engineer in charge .(The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, labour charges and any other incidental charges etc.complete in all respect)
Applying two cots Acrylic Emulsion Paint over two coats Solvent based interior grae Acrylic Primer of Approved Quality and brand on walls and ceiling including scraping and preparing the surface throughly, sand papering in intermediate coats including paste putty for roper levelling complete as per manufacturer's specification and as per direction of the EIC. Luxury Quality (Velvet touch of ICI or similar approved brand & range)
Supplying, fitting, fixing hollow type best quality designed window blinds (MAC or similar type of approved brand) including channel, roller, chords, as necessary complete in al respect as per approved design, drawing and direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fitting and fixtures. scaffolding, labour charges and any other incidental charges etc.
Supplying,fitting & fixing factory made solid flush type doors made JP of 32 mm.thick boiling water proof block board conforming to IS:1659 1990 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 with 1 mm. thick laminates both side of the surface of approved make and brand , fitted with 6 lever mortice lock with latch & handle (Godrej), Door closer (Archies)(Heavy type),C.P. brass Door stopper, CP brass railway hinge 5"(Heavy type) etc. as per approved design, drawing and direction of Engineer-in-Charge . {The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, labour charges and any other incidental charges etc. complete in all respect) 32 mm. thick shutter (size 2'9" x 7') including 3" x 1/2" teak wood (B.G.1st.) door frame
Supply, fitting and fixing file cabinet made up of 19 mm. thick boiling water proof block board conforming to IS:1659-1990 & 6mm. boiling water proof ply conforming to IS: 303-1989 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 with 1 mm. thick laminates both side of the surface of approved make and brand, shutters fitted with multi lock,CP brass handle etc. as per approveo design, drawing and direction of Engineer-in-Charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, labour charges and any other incidental charges etc.complete in all respect)
Providing Wall partitioning with 9 mm. thick boiling water proof ply conforming to IS: 303-1989 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 with 1 mm. thick laminates both side over the ply base of approved make includ:ng the cost of supporting frame work of sal wood (local) section 50mm. X 37.5 mm. and teak wood battens /lipping etc. as per approved design,drawing and direction of Engineer - in - Charge. (The rate includes of cost of all materials including taxes, cost of accessories ,fittings and fixtures, scaffolding , labour charges and any other incidental charges etc. completein all respect)
Supplying,fitting & fixing factory made solid flush type doors made JP of 32 mm.thick boiling water proof block board conforming to IS:1659 1990 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 with 3mm. thick veneer of variety wenge,sapeli,cedar,moibi etc. both side of the surface of approved make and brand including cealer polish matt finish., fitted with 6 lever mortice lock with latch & handle (Godrej), concealed Door closer (Archies)(Heavy type),C.P. brass Door stopper, CP brass railway hinge 5"(Heavy type) etc. as per approved design, drawing and direction of Engineer-in-Charge . {The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, labour charges and any other incidental charges etc. complete in all respect) .
Supplying, fitting, fixing best quality designed 3-D wallpaper with 100% washable property of approved brand fixing on wall, wooden partition, panelling after surface treatment with paint filler and two coats of approved primer including cutting to requisite sizes as necessary, complete as per approved design, drawing .(The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, labour charges and any other incidental charges etc.complete in all respect)
Providing Wall panelling with 9 mm. thick boiling water proof ply conforming to IS: 303-1989 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 on one side of approved make including the cost of supporting frame work of sal wood (local) section 50mm. X 37.5 mm. and teak wood battens /lipping etc. as per approved design,drawing and direction of Engineer - in - Charge. (The rate includes of cost of all materials including taxes, cost of accessories ,fittings and fixtures, scaffolding , labour charges and any other incidental charges etc. completein all respect)
Providing Wall partition/panelling with 3 mm. thick veneer of variety wenge/sapeli/white koto/cedar/moibi etc. of approved make over the ply base including the cost of cealer polish matt finish as per approved design,drawing and direction of Engineer - in - Charge. (The rate includes of cost of all materials including taxes, cost of accessories ,fittings and fixtures, scaffolding , labour charges and any other incidental charges, but excluding the cost of ply and supporting wooden frame work complete in all respect)
Supplying & deliveryof best quality office chair of Giani's, Model no-WOW HB or similar approved brand as per direction of Engineer - in - Charge. (The rate includes of cost of all materials including taxes, cost of accessories ,fittings and fixtures, scaffolding , labour charges and any other incidental charges etc. complete in all respect) . Specifications- Office chair with high back, real leather, aluminium diecast base, nylon wheel, push back, rocking and height adjustable-width 26.5'', seat -4'', height- 28'', upto arm & 48''upto back, moulded high density foam.
Supplying & deliveryof best quality office chair of Giani's, Model no-AXIS ECO or similar approved brand as per direction of Engineer - in - Charge. (The rate includes of cost of all materials including taxes, cost of accessories ,fittings and fixtures, scaffolding , labour charges and any other incidental charges etc. complete in all respect) . Specifications- Office chair with active spine support, net back, nylon base, nylon wheel, Adjustable extra back support, height adjustable-width 23'', seat -3'', height- 28'' upto arm & 37''upto back, moulded high density foam & PU seat.
Supply, Delivery and Installation of Office Table made up of 19 mm. thick boiling water proof block board conforming to IS:1659-1990 & 12mm., 6mm. boiling water proof ply conforming to IS: 303-1989 bonded with phenol forma ldehyde synthetic resin conforming to IS: 848-1974 finished with 1 mm. thick lamination over both sides of the block board & ply base of approved make and brand with 1nos.drawer including locking arrangement . 1 no key board tray fitted and fixed fitted and fixed as per approved design, drawing and direction of Engineer-in-Charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures , labour charges and any other incidental charges etc. complete in all respect)
Providing , fitting and fixing in position decorative wooden motiff made of 'GLO' wood mosaic or similar approved brand and material on partition fixed with adgesive complete as per approved design, drawing .(The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, labour charges and any other incidental charges etc.complete in all respect)
Supply , fitting and fixing wooden glass door of 8mm thick tuffend glass fixed on wooden style (secton 5''x2.5'' of teak wood B.G 1st) & rails (section 5"x 2.5" of teak wood B.G 1st) bonded with phenol formaldehyde synthetic resin conforming to IS:848-1974 , fitted with 6 lever mortice lock (Godrej), Door Closer (Archies) Heavy Type, C.P brass Door stopper, C.P brass long handle CP brass railway hinge 5'' heavy type as per design, drawing, direction of Engineer-in-charge. ( The rate includes cost of materials icluding taxes, cost of accesories , fitting etc. and any other incidental charges complete in all respect). 32mm thick shutter (size 3'6''x7') including 3''x 1/2'' teak wood B.G 1st door frame.
Supply, fitting and fixing T.V Cabinet made of 19mm thick boiling water proof block board conforming to IS:1659-1990 bonded with phenol formaldehyde synthetic resin conforming to IS:848-1974 incuding decorative motiff of GLO wood mosaic or similar approved brand. ( The rate includes cost of all materials, labour charges,taxe, cost of acessories, fittings & any other incidental charges all complete etc. as per approved design, drawing and direction of Engineer-in-Charge
Supplying delivery and installation of table made up of 19mm thick boiling water proof block board conforming to IS 1659-1990 & 12mm, 6mm conforming to IS 303-1989 bonded with phenol formaldehyde resin conforming to IS-848-1974 finished with 3mm thick veneer of variety wenge/sapeli/white koto/cedar etc. of approved make over the ply base including the cost of cealer matt polish with multiple stone finish highlighter in front panel with 3 nos drawer including locking arrangement, 1 cabinet unit finished with 0.8mm laminates inside .(The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, labour charges and any other incidental charges etc.complete in all respect)
Supply & delivery of best quality designer sofa as per following specifications of Engineer-in-charge. Specifications:- Designer sofa made of supporting frame work sal wood (local) with 6'' heavy type spring on seat and back , 5''-6'' high density foam(36-40) density on seat and back and outer covering is high quality designer cotton fabric complete in all respect.
Supplying delivery and installation of side unit made up of 19mm thick boiling water proof block board conforming to IS 1659-1990 & 12mm, 6mm conforming to IS 303-1989 bonded with phenol formaldehyde resin conforming to IS-848-1974 finished with 3mm thick veneer of variety wenge/sapeli/white koto/cedar etc. of approved make over the ply base including the cost of cealer matt polish with 8 nos drawer including locking arrangement, 1 cabinet unit finished with 0.8mm laminates inside .(The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, labour charges and any other incidental charges etc.complete in all respect)
Supplying delivery and installation of back unit made up of 19mm thick boiling water proof block board conforming to IS 1659-1990 & 12mm, 6mm conforming to IS 303-1989 bonded with phenol formaldehyde resin conforming to IS-848-1974 finished with 3mm thick veneer of variety wenge/sapeli/white koto/cedar etc. of approved make over the ply base including the cost of cealer matt polish with suitable nos drawer including locking arrangement, 1 cabinet unit finished with 0.8mm laminates inside .(The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, labour charges and any other incidental charges etc.complete in all respect)
Supplying, fitting, fixingbest quality sanitary fittings of make or similar approved brand including cutting in wall to requisite size as necessary .as per approved design,drawing and direction of Engineer - in - Charge. (The rate includes of cost of all materials including taxes, cost of accessories ,fittings and fixtures, scaffolding , labour charges and any other incidental charges etc. complete in all respect) . Wall hung water closet(C0270) with cistern(C0754) lid (C2052), SEAT COVER(E8112) and fittings (E8100)complete. [Model :- Cardiff of Paryware or similar approved make & model].
Supplying, fitting, fixingbest quality sanitary fittings of make or similar approved brand including cutting in wall to requisite size as necessary .as per approved design,drawing and direction of Engineer - in - Charge. (The rate includes of cost of all materials including taxes, cost of accessories ,fittings and fixtures, scaffolding , labour charges and any other incidental charges etc. complete in all respect) . Health Faucets with Hose & Hook(T9941A1) [Model :- Cardiff of Paryware or similar approved make & model].
Supplying, fitting, fixingbest quality sanitary fittings of make or similar approved brand including cutting in wall to requisite size as necessary .as per approved design,drawing and direction of Engineer - in - Charge. (The rate includes of cost of all materials including taxes, cost of accessories ,fittings and fixtures, scaffolding , labour charges and any other incidental charges etc. complete in all respect) . Bottle Trap( Heavy Type)(T3202A1) [Paryware or similar approved make & model].
Supplying, fitting, fixingbest quality sanitary fittings of make or similar approved brand including cutting in wall to requisite size as necessary .as per approved design,drawing and direction of Engineer - in - Charge. (The rate includes of cost of all materials including taxes, cost of accessories ,fittings and fixtures, scaffolding , labour charges and any other incidental charges etc. complete in all respect) . 15mm brass dia C.P Single lever basin mixer with popup waste system with 450mm long braided hoses (model- FUS-29051b ) of Jaquar or similar approved make & model. .
Supplying, fitting, fixingbest quality sanitary fittings of make or similar approved brand including cutting in wall to requisite size as necessary .as per approved design,drawing and direction of Engineer - in - Charge. (The rate includes of cost of all materials including taxes, cost of accessories ,fittings and fixtures, scaffolding , labour charges and any other incidental charges etc. complete in all respect) . PVC Vanity white colour comprises of Cabinet 500x500x850mm, Mirror 500x500mm, basin & fittings complete.( model Gomez-GOMZ2529) or similar approved make & model. .
Supply & delivery of best quality of centre table & side table of Mobel furniture's or similar approved make as per following specifications of Engineer-in-charge. Specifications:- seat size L-3'x W-3'x H-2'6'',and side table size L-2'6''xW-2'6''x H-2'x6'' made up of best quality teak wood, contemporary design, finished with veneer & polish complete.
AK ENTERPRISES PVT LTD
Standard Civil Construction
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .