SSP/605/Q/TOILET BLOCK

Amount

Earth work in excavation of foundation trenches or drains, in all sorts of soils (including mixed soil but excluding laterite or sandstone) i/c. removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches. Levelling, dressing and ramming the bottom, bailing out water etc. as required complete a) Depth of excavation not exceeding 1500 mm.

Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including water and raming etc. layer by layer complete. (Payment to be made on basis of measurment of finished quantity of work). a) With earth obtained from excavation of foundation

Filling in foundation or plinth by fine sand in layers not exceeding 150 mm. as directed and cosolidating same by thorough saturation with water raming complete including the cost of supply of sand. (Payment will be made on profile measurment before and after work)

Single brick flat soling of picked jhama bricks i/c. ramming and dressing bed to proper level and filling joints with powdered earth or local sand

Cement concrete with graded stone bllast ( 40 mm size excluding shuttring) A) (A) [Pakur Variety] a) 1:3:6 proportion

OrdinaryCement Concrete M20 (mix 1:1.5:3) with graded stone chips (20 mm down) excluding shuttring and reinforcement if any, in ground floor. As per relevant IS codes. a) Pakur Variety i) In Gr. floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concretes slabs, beams, columns, lintels curved or straight i/c. fitting, fixing and striking out after completion of works (In all floor) a)25mm.to 30 mm. thick wooden shuttering as per decision & direction of the engineer -in-charge i) In ground floor

Reinforcement for reinforced concrete work in all sorts of structures i/c. distribution bars, stirrups, binders etc. including supply of rods, straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction (For all floors) i) Tor steel/Mild steel I. SAIL/ TATA/RINL i) In ground floor

Brick work with 1st class bricks in cement morter(1:6) In superstructure, ground floor

125 mm. thick brick work with 1st class bricks in cement mortar (4:1) i) In Gr. floor

Artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with toping made with ordinary or white cement (as necessary)and marble dust in proportion (1:2) including smooth finishing and rouding off corners and including raking out joints or roughening of concrete surface and application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m. all complete including all materials and labour. In ground floor 3 mm thick topping (High polishing grinding on this item is not permited with ordinary cement. Using grey cement ii) 25 mm thick

Supplying, fitting & fixing 1st. quality Ceramic tiles in wall and floors to match with the eisting work & 4 nos. of key stone (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Other than Coloured decorative including white

M.S. or W.I. ornamental grill or approved design joint continuously welded with M.S., W.I. flates and bars for windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. i) Grill weighing above 10 kg./sqm. Upto 16 kg./sqm.

Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge.

PVC Door Shutter -37 mm thick . Supplying, fitting and fixing P.V.C. door shutter of approved quality and shade in position, the style and rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59mm x 30mm section with 2.0mm (+0.2mm) wall thickness suitable size and section will 2.5 mm. wall thickness Horozontal & Vertical section shall be fixed to each other by self tapping screws and one solid polymetric/M.S. galvanised tubular L-shaped bracket 100mmx200mm in each corner of the shtter frame for placing hinges. Polymer based multicavity hollow section of 120mm x 30mm with 2.0mm (+0.2mm) wall thickness will be placed in the middle, reinforced by solid polymer bar of 200mm long at both ends and screws from both sides as lock rail. The section frame will then fitted in by PVC panels of size 100mmx25mm with wall thickness 1.2mm (0.2mm) and 2 nos. of 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt/tower bolt/door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour and hire of tools and plants and appliencies. Carriage of all materials, taxes & all other incidental charges complete. The rate is exclusive of cost of hings, hasp bolt, tower bolt, door ring etc.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar i/c. rounding off or chamfering corners as directed and ranking out joints or roughening of concrete surface, i/c. throating, nosing and drip course where necessary etc. [All Floors]

(i) c) 15 mm. thick plaster with 6:1 cement mortar (Outside)

(i) b) 20 mm. thick plaster with 6:1 cement mortar (Inside)

(ii) c) 10 mm. thick plaster with 4:1 cement motar(RCC Surface)

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), i/c. fitting and fixing the same in position but excluding the cost of hinge and other fittings (In case of non-supply of single plank, panel rate of reduction to a maximum of 20% will be made) iv) 25mm thick shutter with 12mm thick panel of size 30 to 45 cm. b) Sisu, Gamar, Champ, Badam, Bhola, Mogra, Hallak

Acrylic Distemper to interior wall, celling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two coats

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In ground floor (Outside Wall) ii) Two Coats

Priming one coat on Steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand i/c. smoothening surface by sand papering etc. i/c. using of approved putty etc. on the surfaces, if necessary : b) For Steel or Metal Surface iv)Two coats (With any shade except white)

Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc. Cement 0.152 cu.m per100 sq.m.

For Water Supply & Sanitary Works (18% of Total )

For Electrical installation ( 6% of Total )

Any other charges not covered from Ser No.1 to Ser No.24

SABIR ANSARI