EXTENSION WORK OF GAJERA CIRCLE BRTS BUS SHELTER, NEAR SHYAMA PRASAD MUKHARJEE GARDEN, IN NORTH (KATARGAM)ZONE,SURAT(WORK NO.2)(2ND ATTEMPT)

Name of Work :- EXTENSION WORK OF GAJERA CIRCLE BRTS BUS SHELTER, NEAR SHYAMA PRASAD

MUKHARJEE GARDEN, IN NORTH (KATARGAM) ZONE, SURAT (Work No.2) (2nd Attempt)

Item Quantity Unit

WORK UP TO PLINTH LEVEL

Providing and installing barricades including supplying, paiting with

flourscent paint/white paint and fixing CGI sheet 24 SWG of required

height as per site condition and M.S. angle of required size to restain at

2.5 mt. c/c and dismantalling the same after completion of work and

allowing for movement of traffic as per drawing and as per instruction

from engineer in charge

(SOR -Road work-SMC 2024-25, Pg No. 13, It No. 1,PART-V)TRAFFIC

SAFETY,TRAFFIC CONTROL AND SURVEY

Reuse of the above barricades in item 24.1 for traffic safety purpose

without procuring new barricades.

(SOR -Road work-SMC 2024-25, Pg No. 13, It No. 2,PART-V)TRAFFIC

SAFETY,TRAFFIC CONTROL AND SURVEY

Demolition including stacking of serviceable materials with all lead and

lift. (i) RCC Work

(SOR SMC 2024-25, Pg No. 18, It No. 1) Demolition Items / Items for

Excavation for foundation includ.sorting out & stacking of useful

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.

Comp. (A) Loose or Soft soil

Executed With Manual Labours

(A) loose or soft soil with Manual Labours

SMC SOR 24-25, PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

5 disposal of the surplus excavated soil as directed within a lead of

50 M. For following diameter of piles.

SMC SOR 24-25, ITEM NO. 94, PG. NO.

Earthwork for embankment including breaking clods, dressing

with all lead and lift and including watering rolling and

consolidation of subgrade in layers at O.M.C. to required dry

density including filling the depression which occur during the

process using power roller 8T to 10T.(E) From Borrow area within

3.0KM. lead (more than 10 ton)

R & B SOR, ITEM NO.- 26004EA

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand : 6 Crushed

7 stone agg 20m.m Nominal size) &curing comp. excl. cost of form

work in :(a) foundation & Plinth

SMC SOR 24-25, PAGE NO 1 IT NO 5 5.00 3,095.25 C.M.

Providing & laying cement concrete 1:2:4 (1 cement : 2 sand :

graded stone agg. 20 mm nominal size) & curing comp. Includ.

cost of form work but exclu. Cost of reinforcement for reinforced

concrete work in : Grade Slab

(C) Grade slab 8.00 3,741.69 C.M.

(SOR SMC 24-25 Pg No. 9 It No. 95)

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000 (latest

9 revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(A) foundation, footing, base of columns and mass concrete 10.00 4,332.50 C.M.

SMC SOR 24-25, PAGE NO 14, Design Mix Concrete

Item Quantity Unit

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000 (latest

10 revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 4.00 12,930.68 C.M.

(2) Having cross sectional area more than 0.085 sq. mt .up to

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9,288.03 C.M.

SMC SOR 24-25, PAGE NO 14, Design Mix Concrete

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 9,083.57 C.M.

(2) Having cros sectional area more than 0.08 sq. mt and upto

(3) Having cross sectional area more than 0.12 sq. mt . 0.00 7,067.84 C.M.

(G) Vertical and horizontal fins 0.00 9,483.21 C.M.

SMC SOR 24-25, PAGE NO 14, Design Mix Concrete

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed

11 stone agg. 20 m.m Nominal size)& curing comp. incl. cost of from

work in: wall caps/ copings

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

12 R.C.C. work incl. bending, binding & placing in position etc.comp.---

Upto G.L./P.L. 2830.00 77.29 Kg.

(SOR SMC 24-25,Pg No. 1 It No. 8)

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 35 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and

Filling in foundation and plinth with murrum or selected soil in

15 layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

(SOR SMC 24-25, Pg No. 1 It No. 11) 49.00 301.78 C.M.

carrying out plinth treatment to post construction/existing

structure by spraying chemical solution for termite control

treatment including labour and material consisting with ISI

specification using chlordene and chiorpurfiles 20 EC as per

6131_part II concentration weight one litter give 1% concentration

inclusive of one litter chemicals emulsions application at the rate

of 5 litter chemicals /sqmt of surface is recommended as per IS.

(SOR SMC 24-25, Pg No. 12 It No. 127)

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

17 coat of C.M. 1:1 (1cement: 1 sand) apply thick cement slurry and 44.00 324.00 S.M.

apply roller horizontal as well as vartical ( two times ) up to good

quality and size of grain in elevation as per directed by engineer

(SOR SMC 24-25, Pg No. 3 It No. 28)

Item Quantity Unit

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

manufacturers Surface Preparation : surface is thoroughly clean,

dry and free from all loose dirt, chalk, grease, fungi,algae and

18 flaking paint. This can be achieved by brushing with a wire/ stiff

coir brush, followed by water jetting if required. Fill up all minor

cracks and defects with white cement and sand mixture in the

ratio 1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean the

surface thoroughly using wire brushes.Priming: Apply a liberal

coat of exterior acrylic primer and allow it to dry for 4-5

hours.Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

SMC SOR 24-25, , COLOR WORK ITEM NO.- 17 44.00 82.00 S.M

TOTAL COST UP TO PLINTH-(A)

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000 (latest

19 revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 5.00 12,930.68 C.M.

(2) Having cross sectional area more than 0.085 sq. mt .up to

Ground Floor 0.00 11,253.32 C.M.

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 9,288.03 C.M.

(SOR SMC 24-25,Pg No. 14 ,Design Mix Concrete)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 9,083.57 C.M.

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 7.00 8,155.37 C.M.

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 7,067.84 C.M.

(SOR SMC 24-25, Pg No. 14 ,Design Mix Concrete)

(2) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 7,965.38 C.M.

(3) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 8.50 7,377.92 C.M.

(4) Having more than 13 cm. Thickness

Ground Floor 0.00 6,793.97 C.M.

(SOR SMC 24-25, Pg No. 14 ,Design Mix Concrete)

Item Quantity Unit

Ground Floor 1.00 9,963.33 C.M.

(SOR SMC 24-25, Pg No. 14 ,Design Mix Concrete)

Ground Floor 7.00 7,119.46 C.M.

(SOR SMC 24-25, Pg No. 14 ,Design Mix Concrete)

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

20 R.C.C. work incl. bending, binding & placing in position etc.comp.---

Ground Floor 3558.00 77.29 Kg

(SOR SMC 24-25, Pg No. 2 It No. 15)

Brick work using common burnt clay building bricks having

21 crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar

1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 0.00 4,729.83 C.M.

(SOR SMC 24-25, Pg No. 2 It No. 16)

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar

1:4 (1- Cement : 4 - coarse sand ) in foundation and plinth (C)Fly

Ground Floor 0.00 712.81 S.M.

(SOR SMC 24-25, Pg No. 2 It No. 17)

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand) (A) For wall and similar surfaces --

(B) for ceilings and soffits of stairs

Ground Floor 111.00 225.34 S.M

(SOR SMC 24-25, Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality chicken wire

mesh (FRP / PVC)at junction of brick work and RCC work or two

dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag

by cement mortar 1:3 before applying the plaster, including

curing, scaffolding all complete as directed.

Ground floor 23.00 102.00 S.M.

(SOR SMC 24-25 Pg No. 11 It No. 124)

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

25 coat of C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry and

apply roller horizontal as well as vartical ( two times ) up to good

quality and size of grain in elevation as per directed by engineer

Ground Floor 110.00 324.00 S.M

(SOR SMC 24-25.Pg No. 3 It No. 28)

Providing & applying single coat of textured finish at external

surface at all floor levels at outer side of the building on RCC or

Masonary walls. Rate to include for all labour, materials, staging,

scaffolding, cleaing, curing etc. application of texture after

26 throughly brushing th`e surface to give an even shade free from 154.00 404.00 S.M.

mortar dropping/other foreign matter etc. complete. application

of textures & paints must be as per company's standard

instructions. Texture and colour selection as per approved by

engineer in charge.

RATE ANALYSIS -

Providing throating or plaster drip and moulding it to R.C.C. chajja

etc. comp.. For all floor

Item Quantity Unit

Ground Floor 48.00 43.74 R.M

(SOR SMC 24-25, Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line and level

etc. Comp. For all Floor (M.R.)

Ground Floor 144.00 50.00 R.M

(SOR SMC 24-25, Pg No. 3 It No. 30)

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

manufacturers Surface Preparation : surface is thoroughly clean,

dry and free from all loose dirt, chalk, grease, fungi,algae and

29 flaking paint. This can be achieved by brushing with a wire/ stiff

coir brush, followed by water jetting if required. Fill up all minor

cracks and defects with white cement and sand mixture in the

ratio 1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean the

surface thoroughly using wire brushes.Priming: Apply a liberal

coat of exterior acrylic primer and allow it to dry for 4-5

hours.Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

SMC SOR 24-25, , COLOUR WORK ITEM NO.- 17 110.00 82.00 S.M

NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed

30 proforma duly stamped (2) The rate shall include for work at all

floors & conducting water proof test as directed. (M.R.)

(B) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc. consisting of following operations. (a) Applying

and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before

tratment. (b) Laying cement concrete using broken bricks/brick bats

mm to 100 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse

sand) admixed with proprietary water proofing compound conforming to

IS:2645 ,brick bats is finally covered by jointless cement plaster 20mm

th. in C.M. 1:4 added with special water proofing compound confirming

to IS:2645 & top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to height of about

mm in a shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at khurra as

mm. (c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above

SMC SOR 24-25, Page no-6.ITEM NO.- 62-B 68.00 511.00 S.M

Providing and laying broken china mosaic flooring for terrace using

12mm to 20mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

31 out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall clearing with water and

oxalic acid etc. as directed.

SMC SOR 24-25, Page no-6.ITEM NO-131 68.00 779.70 S.M

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with

grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick

Item Quantity Unit

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

33 Cement : 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing etc.

Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other matter and sand papered smooth.

(SOR SMC 2024-25, Pg No. 15, It No. 4,Colour works) 111.00 40.59 S.M

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

35 even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

(SOR SMC 2024-25, Pg No. 16, It No. 5,Colour works) 111.00 83.36 S.M

Providing and fixing precast Rubber Dye moulded TECTILE

concrete flooring tiles, 25 to 30mm avg. thick with grade of

concrete M250 pnumatic compressed and Mechanically vibreted

36 and as per approved design over 20mm thick bed of cement

mortar 1:6 jointed with neat cement slurry with pigment to match

the shade of tiles in proper line & level etc.complete.

RA-2 Tectile flooring 5.00 1014.16 S.M

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all floor

37 levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. (M.R.) (B) 110 mm. Dia.

(SOR SMC 24-25, Pg No. 8 It No. 85) 20.00 325.00 R.M.

Providing & fixing G.I./Aluminum Patti clamps at all floor levels of

approved design to C.I. Or S.C.I pipes including the cost of cutting holes

& making good the wall etc. Complete - 100 mm. dia. (M.R.)

(SOR SMC 24-25, Pg No. 8 It No. 91) 20.00 20.00 No.

Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness(CM 1:3 [1 cement

:3 coarse sand]) finishing as per instruction given by Eng. incharge. For

(B) 100 mm /110 mm PVC PIPE

(SOR SMC 24-25, Pg No. 9 It No. 93) 20.00 180.00 R.M.

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

40 stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

Providing and fixing stainless steel ( Grade 304) (Flat of size 30mm

x 5mm. thick), gill with 10mm. Dia S.S.polished bar etc., including

welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary stainless

41 steel nuts and etc., of required size as per approval of Engineer-

incharge, as per drawing .(for payment purpose only weight of

stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

Item Quantity Unit

M.R.Approved for Construction of Conventional type BRTS Bus Shelter

in WEST (Rander) Zone For Surat Municipal Corporation. Kg.

Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron diagonals

20 x5mm size with top & bottom rails of T-iron 40x40x6mm. with

38mm dia. steel pulleys comp. with bolts, locking arrangements,

stoppers, handles incl. applying a priming coat of Redlead paint

Providing & fixing Powder Coated Aluminium partly glazed and

partly panelled partition using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent approved make

having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt &

Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear

float glass of approved make including all other necessary fittings

43 and fixtures. Entire work will have to be made water proof using 0.00 2400.00 SM

necessary rubber sectioned wherever required. Gaps all round the

frame to be filled with approved water proof sealent. Bottom

portion of doors both side to be covered with 12mm thick

prelaminated particle board of approved make and quality and as

per design. A) Same as above but Colour anodized

SMC-SOR-2024-25-Aluminium works-IT NO.-7

Providing & fixing partly panel & partly glass Powder Coated

Aluminium doors with aluminium section of Hindalco, Jindal

Narmada,Banco or Equivalent approved make having Poder

Coated outer frame Leg Partition section of 63.50 mm x 38.10 mm

having weight 1.158 kg. / R.M. shutter section having size

44 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 0.00 3237.00 SM

kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881

kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal Section

No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid

frogting and 12 mm thick prelaminated sheet of Greenlam,

Panama or archid make as app( A) Same as above but Colour

SMC-SOR-2023-24-Aluminium works-IT NO.-6

Providing and fixing of 12 mm tk toughned GLASS DOORS using

75 mm C-channels in border and edge profile in between with

powder coating with using Dorma Xl-C 4001 Glass Door PKG EN

(Top Patch-1, Bottom patch-1, Heavy duty Floor Spring-1, Corner

Lock-1); Dorma Xl-C 4003 A Patch fitting for overpanel and

sidelight; Dorma Xl-C 4004 A Connector for overpanel and

45 Sidelight; Dorma Xl-C 4006 Central Connector; Dorma Xl-C 4008 0.00 36337.92 Each

Side Connector; Dorma Xl-C 3000 H Type Handle 400x22 CTC

AND AS PER DRAWING including all acceessories,locks, material,

silicone,labour,installation, Hole & slote charges etc. and

complete the work satisfactorily as per instruction of architect or

Engineer-in charge.Size -(1.25 m. x 2.45 m.)

RA-3 Glass door

Providing and constructing sandwitch type Granite stone working

platform 0.6 mt. wide & 0.75 mt. height, including one end side

granite stone (Double Polish) of 1.25 mt. height & front granite

stone patti of 10 cm wide, vertical partitions of half B.M. wall in

C.M. 1:4 and 10mm th. plaster in 1:3 with finishing smooth with

cement slurry as required etc. comp as per instruction given by

site in charge at all floors. (Basic rate of Granite Rs.1,200.00 /

(SOR SMC 2024-25, Pg No. 11, It No. 123)

Item Quantity Unit

Providing and fixing 8mm thick glass of approved make including

toughening, edge diamond polishing, making necessary holes in

glass, supporting system of good quality SS accessories of Ozone

make ("D" clamp fittings) and joints to be filled where necessary

by clear structural silicon sealant as specified by Engineer in

RA-4 Glass partition for Ticket counter

Fire extinguisher - CO2 Gas type 4.5 kg. Supply, installation and testing of

CO2 Gas fire extinguisher with necessary hardware and consumables.

48 Standard - Confirming to IS:15683-2006 with ISI mark. UOM - Price per 0.00 4200.00 Each

each No. Make - Kanex / Safex / Secure Zone

(SOR SMC 2024-25, Pg No. 12, It No. 136)

Fire extinguisher - ABC powder type 6 Kg. Supply, installation and testing

of ABC powder fire extinguisher necessary hardware and consumables.

49 Stored pressure mechanism. Charged with MAP-50% (ABC) Dry powder. 0.00 2000.00 Each

with wall mounting clamp. UOM - Price per each No. Make - Kanex /

Safex / Secure Zone

(SOR SMC 2024-25, Pg No. 12, It No. 135)

Providing and fixing 3-sitter S.S. Bench made of 32mm x 5mm thik S.S.

Flat (SS 304 Grade) with top seatting arrangement made of Polished

Indian teak wood Sleeper of section size 200 mm x 25mm(W x H),and

fixing the bench at the specified location as per detail drawing and

instruction of architect or Engineer-in charge.

Rate Analysis Bench-3 Seater 0.00 9330.00 No.

Providing and fixing of cement ceiling using 10 mm cement sheet of

brand T.P.I,SHERA (single sides), etc. using aluminium framing of 25mm

x 50mm x 1 mm in 600 x 600 mm grid,and same pipe for vertical

framing, including all hardware item, aluminium L clits, 25 mm powder

coated self drilling screws,groove (if shown) with all material, 75 mm

51 anchor fastners,making of coves for indirect lighting, grooves,cutting

,labour,SCAFFOLDING, lead and wastage etc. complete. And Finished

with satin finish wall color and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

R.A-Cement sheet ceiling 68.00 2356.00 SM

Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint (A) in beams & joists channels angles, tees, flats

with connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common raffers & the

(SOR SMC 24-25, Pg No. 9 It No. 98-A) 30.00 9,108.48 Qtl.

Providing and fixing 12mm dia Fasternar bolts using HILTI

53 chemical system incluing all material, labour, equipment

M.R.Approved for Construction of Conventional type BRTS Bus

Shelter in WEST (Rander) Zone For Surat Municipal Corporation.

Providing and erecting on site 6mm thick colour acrylic sheet

with 3M make Defuser film of UV resistant type with graphic

profile cut in colour acrylic. The entire surface shall be water proof

and air tight with necessary gaskets. The corners shall be properly

made. The acrylic to acrylic joints at the corners shall be evenly

chamfered before sticking. The item includes necessary hardware

to fix the acrylic signage to the MS structure. Do as specified by

Engineer in Charge.

SMC APPROVED RATE (Public Transport Mobility Comm. Res.No.

Item Quantity Unit

Providing and fixing in position 10mm thick acrylic sheet UV

resistant as per designs on ETM counters for signages. The

acrylic sheet shall be firmly screwed to the M.S. members so as to

withstand wind speeds upto 47m/s. The joints of the sheets shall

be well champhered and jointed using silicone sealants of Dow

corning. The rates shall be inclusive of all kinds of scaffolding,

staging, tools, tackles, hardware and adhesives. The work shall be

done to the complete satisfaction of the Engineer in charge.the

complete satisfaction of the Engineer in charge.

SMC APPROVED RATE (Public Transport Mobility Comm. Res.No.

Providing and fixing in position 8mm thick acrylic sheet UV

resistant as per designs on ETM counters for signages. The

acrylic sheet shall be firmly screwed to the M.S. members so as to

withstand wind speeds upto 47m/s. The joints of the sheets shall

56 be well champhered and jointed using silicone sealants of Dow

corning. The rates shall be inclusive of all kinds of scaffolding,

staging, tools, tackles, hardware and adhesives. The work shall be

done to the complete satisfaction of the Engineer in charge.

SMC APPROVED RATE (Public Transport Mobility Comm. Res.No.

Providing and installing in position HDPE synthetic Fiber carry

rollers of 100mm dia as instructed by Engineer in Charge. The

rollers shall have seals which are with labyrinth seal components,

non-rubbing polymer seal and attached with dust and water

deflectors. The rollers shall be such that they shall have good

rolling during impact and shall not damage the body of the bus

57 nor shall get damaged during impact and shall act as a protecting

mechanism for the bus and the surface of the bus shelter. The

installation of the rollers shall be as per the instructions of the

manufacturers. Samples shall be approved prior to installation.

Roller shafts shall be made of stainless steel and multi labyrinth

seals shall be filled with high grade lubricants.

SMC APPROVED RATE (Std Com. Res.No. 584/2023 Dt. 13/04/23

Providing & Laying Cement concrete guardstone in proportion 1:2:4 (1

Cement : 2 Coarse sand : 4 Graded stone aggregate 20 mm nominal size)

& shape as per the drawing including necessary excavation steel form

work & white washing etc. complete (cement and steel contractor own

supply.) 750 MM X 350 MM X 400 MM Size

(M.R.) Approved in S.W (Athwa zone) 70.00 656.00 No.

Providing & fixing interlocking type Cement Concrete paver block

of approved shape & design having 60 mm thickness (M-40)

purchased from SMC's approved paverblock manufacturer only on

59 fine sand bedding. Item includes leveling by using vibratory plates

compacted machine. Item also includes all materials, Labour,

euipments, tools, plants, watering, cleaning etc. complete.

For Road Junction 80 mm thick ( M-50) 0.00 714.00 S.M.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Preparation of subgrade with Compacting, Levelling and

consolidation of subgrade with miniroller /plate vibrator machine

including watering and filling in depressions which occur during

the process as directed by engineer in charge.

SMC SOR, GROUND DEVELOPMENT WORK ITEM NO.2

Item Quantity Unit

Providing & laying Granular sub base (GSB)confirming to Grading-

V of Table 400.0 of compacted thick of 150mm with specified

graded stone metal and sand mixed in place and laid with

mechanical means spreading with motor grader and compacting

with vibratory roller having minimum 80-100 KN static weight to

acheve desired density of 98% of MDD including all material,

labour, machinery with all leads and lift etc. complete.

SMC SOR, GROUND DEVELOPMENT WORK ITEM NO.9

Providing and laying 200 micron plastic sheet on prepared sub

base For V.D.S Concrete

SMC SOR, GROUND DEVELOPMENT WORK ITEM NO.12

Providing & laying cement concrete Pavement using 1:1.5:3 (1

cement:1.5 sand:3 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface with a

skim powder floater, curing etc. complete.

SMC SOR 24-25, GROUND DEVELOPMENT WORK ITEM NO.-

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total

64 thickness with filling of epoxy sealent as directed by engineer in 0.00 50.00 R.M.

SMC SOR 24-25, GROUND DEVELOPMENT WORK ITEM NO.-

Providing 100mm thick readymade C.C. kerb of strength M-20

(size 300mm x 380mm) purchased from SMC's approved

paverblock manufacturer & setting in line, level and in truly

65 vertical position, including filling joints in C.M. 1:1 (1 part of 0.00 228.00 R.M.

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part

of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge.

SMC SOR 24-25, GROUND DEVELOPMENT WORK ITEM NO.-

Providing and fixing Eco Solvent Vinyl Sticker (120 gsm) with

Lamination (100 gsm)

(SOR SMC 2024-25, Pg No. 13, It No. 147)

Providing and fixing 02 units Automatic sliding Doors (2 leafs) of

size as per drawing for items to be fitted onto the Bus Station

excluding any other RF component.) with Four Door RF Controller

with RFID Reader with weatherproof Stainless-Steel enclosure to

be fitted near the bus door with Emergency Door operations

Switche in Ticket office (inclusive of two-year warranty period) +

67 Four Door RF Controller (inclusive of two-year warranty period) + 4.00 0 Lot

RFID Reader with weatherproof Stainless-Steel enclosure to be

fitted near the bus door (inclusive of two-year warranty period) +

Emergency Door operations Switche in Ticket office (inclusive of

two-year warranty period) ( SD unit Per Station .Each Unit

comprise two leafs) (Execution as per directed by Electrical

engineer incharge)

TOTAL COST ABOVE PLINTH-(B)

Total Civil Work A+B

Electrical Work

Part-01 Internal Wiring & Light Fixture

Item Quantity Unit

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on

PVC / Metallic/Wooden box, single mounting base frame covered

1 with textured/metallic/white front plate modules erected on / in 8.00 485.81 Pt.

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with medium

class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for Tissino / Modular secondary light point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires, in

below type of pipe to be erected complete with earth continuity

and necessary connection with primary light with accessories

2 erected on Metal / PVC / wooden box covered with 3 mm thick 4.00 167.66 Pt.

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring.

with necessary Lamp holder / ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected with

3 following type of accessories.[I] For 6A Plug and 6 a switch with 2.00 510.05 Pt.

2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board.(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic/Wooden box covered with appropriate front

4 plate modules erected on / in wall / ceiling as per pipe erected with 4.00 745.38 Pt.

following type of accessories.[II] For 16A Plug and 16 amp

switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

5 erected with necessary PVC fittings & Junction boxes fixed with 15.00 24.24 Mtr

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed.(a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

6 erected with necessary PVC fittings & Junction boxes fixed with 10.00 33.33 Mtr

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed.(b) 25 mm

Item Quantity Unit

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT

3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED

7 driver efficiency > 85 % ( fitting required LM-79 & LM-80 12.00 758.51 Ea.

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips

complete.IP65 (iv) 22-24 watts, Surge-2 KV Cat-III

Subtotal Part-01

Part-02 LT Switchgear, Distribution Boards & LT Panel

Providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box. confirming

to IS 8828/1996 with ISI Mark Cat.III

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

9 MCBs.(The DBs should be used of same company of MCB to be 2.00 1152.41 Each

used) suitable for (A) single phase incoming and horizontal

single phase outgoing (b) sheet steel double door (IP-43)

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity (A)

6 to 32 Amp. Cat.III

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

12 40 A / 100 mA DP ELMCB 2.00 2636.10 Each

Subtotal Part-02

Part-03 Cables and Wires

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

13 with 1.5 sq. mm copper conductor FRLS PVC insulated stranded 80.00 82.82 Mtr

wire of green colour for earth continuity of following size.(A) with

medium class Rigid PVC pipe and accessories.(b) 2 wire

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

14 copper conductor FRLS PVC insulated stranded wire of green 110.00 112.11 Mtr

colour for earth continuity of following size(A) with medium class

Rigid PVC pipe and accessories.(a) 2 wire 4 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

15 copper conductor FRLS PVC insulated stranded wire of green 30.00 260.58 Mtr

colour for earth continuity of following size(A) with medium class

Rigid PVC pipe and accessories.(h) 4 wire 6 sq. mm

Subtotal Part-03

Part-04 Earthing and Automatic sliding Doors & MISC

Providing and erecting Annealed bare Copper wire 8 to 16 SWG.

Item Quantity Unit

Providing and fixing 02 units Automatic sliding Doors (2 leafs) of

size as per drawing for items to be fitted onto the Bus Station

excluding any other RF component.) with Four Door RF Controller

with 2 RFID Reader with weatherproof Stainless-Steel enclosure

to be fitted near the bus door with Emergency Door operations

Switche in Ticket office (inclusive of two-year warranty period) +

Four Door RF Controller (inclusive of two-year warranty period) +

RFID Reader with weatherproof Stainless-Steel enclosure to be

fitted near the bus door (inclusive of two-year warranty period) +

Emergency Door operations Switche in Ticket office (inclusive of

two-year warranty period) ( SD unit Per Station .Each Unit

comprise two leafs)

Dismentaling/Reinstalled of Existing Sliding Door, Channel Set,

Cover, GP90 Reader, All type of Door Hardware Material, All sorts

of Cables and other related accessories; as per Engineer-in-

Subtotal Part-04

Total Electrical work Part (01+02+03+04) =

ATotal Civil + Electrical

SIGNATURE OF THE CONTRACTOR WITH SEAL. Executive Engineer

Surat Municipal Corporation