Providing ornamental street light poles all around S.V.Museum,Tirumala

Supply of 4.27 meters height decorative street / garden lighting pole with Single Arm with mild steel pipe with Zinc rich primer & pure polyester powder coating and finishing with polyurethane based paint with all accessories such as suitable base plates, bolts & nuts etc, complete Warranty : 5 Years Make: K Lite-KP 5137

Supply of 5 meters height decorative street / garden lightingk pole with Double Arm with mild steel pipe with Zinc rich primer & pure polyester powder coating and finishing with polyurethane based paint with all accessories such as suitable base plates, bolts & nuts etc, complete. Warranty : 5 Years Make: Klite - KP8321 Note: Golden finishing for the floral design areas has to be provided as directed by the department

Supply anad fixing of 34W Post top / street light luminaire with the following specification.

a) Wattage : ˂34W LED (Tolerance allowed as per IS 16103) b) SDCM : ˂5 c) Lumen output : ˃4000lm d) CRI(Ra) : ˃70 e) CCT : 3000K f) Driver Integral : Constant current g) Surge protection : ˃6KV SPD h) The luminaire shall have ingress protection of IP65 i) Housing : Pressure die cast Al j) Beam Angle : 120° Note: Tfhe integral driver and the luminaire shall comply with the IEC standards or their Indian equivalents. The BIS certificates for both the lumaire and the driver has to be provided. Makes: Philips-BSS461 LED40/ equivalent of Osram/ K-Lite

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Laying of U.G cables up to 50 Sq.mm through existing G.I.Pipe and back filling of trench including labour charges etc., complete.(Excluding the cost of G.I Pipe)

Supply Laying and Transportation of Outer dia 50mm and inner dia 38mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete .

Cutting open BT road surface (As well as Asphalt concrete up to 75 mm thick) including water bound macadam.

Cutting open cement concrete road

Cement concrete using 20mm HBG metal in CC (1:3:6) laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete

Plastering in CM (1:6) with 12mm thick using river sand including curing, conveyance of materials etc.,

Supply of 3 core, 2.5 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR kabel / Havells/ Finecab / KEI/ Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/ Anchor /Million/Sudhakar/Orbit/Batra Henlay

Foundation and erection charges with special T&P, for upto 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete.

Providing independent earthing with 2Kgs. (15mts.) of No. 8 SWG GI wire for coil earthing in an earth pit of size 2'x2'x4' and filled with alternate layers of 20 Kgs. Of hard coke, 10 Kgs. of salt and required quantity of sand and connecting the GI wire to the pole/ pipe with 3/8" x 3" GI bolts and nuts and washers as directed during execution.

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

Supply of 4.27 meters height decorative street / garden lighting pole with Single Arm with mild steel pipe with Zinc rich primer & pure polyester powder coating and finishing with polyurethane based paint with all accessories such as suitable base plates, bolts & nuts etc, complete Warranty : 5 Years Make: K Lite-KP 5137

Supply of 5 meters height decorative street / garden lightingk pole with Double Arm with mild steel pipe with Zinc rich primer & pure polyester powder coating and finishing with polyurethane based paint with all accessories such as suitable base plates, bolts & nuts etc, complete. Warranty : 5 Years Make: Klite - KP8321 Note: Golden finishing for the floral design areas has to be provided as directed by the department

Supply anad fixing of 34W Post top / street light luminaire with the following specification.

a) Wattage : ˂34W LED (Tolerance allowed as per IS 16103) b) SDCM : ˂5 c) Lumen output : ˃4000lm d) CRI(Ra) : ˃70 e) CCT : 3000K f) Driver Integral : Constant current g) Surge protection : ˃6KV SPD h) The luminaire shall have ingress protection of IP65 i) Housing : Pressure die cast Al j) Beam Angle : 120° Note: Tfhe integral driver and the luminaire shall comply with the IEC standards or their Indian equivalents. The BIS certificates for both the lumaire and the driver has to be provided. Makes: Philips-BSS461 LED40/ equivalent of Osram/ K-Lite

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Laying of U.G cables up to 50 Sq.mm through existing G.I.Pipe and back filling of trench including labour charges etc., complete.(Excluding the cost of G.I Pipe)

Supply Laying and Transportation of Outer dia 50mm and inner dia 38mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete .

Cutting open BT road surface (As well as Asphalt concrete up to 75 mm thick) including water bound macadam.

Cutting open cement concrete road

Cement concrete using 20mm HBG metal in CC (1:3:6) laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete

Plastering in CM (1:6) with 12mm thick using river sand including curing, conveyance of materials etc.,

Supply of 3 core, 2.5 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR kabel / Havells/ Finecab / KEI/ Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/ Anchor /Million/Sudhakar/Orbit/Batra Henlay

Foundation and erection charges with special T&P, for upto 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete.

Providing independent earthing with 2Kgs. (15mts.) of No. 8 SWG GI wire for coil earthing in an earth pit of size 2'x2'x4' and filled with alternate layers of 20 Kgs. Of hard coke, 10 Kgs. of salt and required quantity of sand and connecting the GI wire to the pole/ pipe with 3/8" x 3" GI bolts and nuts and washers as directed during execution.

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

(Rupees Twenty one lakhs seventeen thousands four hundred sixteen and paise fourty five only)