SPL REPAIR TO BLDG NO P02 AND FENCING TO SHIVAJI ENCLACE AT OD TALEGAON AND PROVN OF FLY PROOFING ARRANGEMENT IN FRESH RATION STORES AT GLR 55 UNDER AGE BR WEST AT GE DEHU ROAD

Amount

Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed.

Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound as per manufacture instruction by weight of cement for filling depressions if any to receive water proofing treatment (WPC shall be measured & paid seperately) complete all as specified and as directed.

Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed.

M/L for cleaning the plastered / concrete surfaces with wire brushes and applying water proofing treatment as under :- (a) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface. (b) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.5 kg per Sqm by torch applicaton method. (c) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. (d) Finally applying a coat of solar reflective bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane. (e) The make / treatment shall be from the one of the following manufacturer :- (i) 'Moply FP' of M/s Texsa (I) Pvt Ltd. (ii) 'Hyperplast' pf IWL India Ltd. (iii) 'Super thermpay' manufactured by M/s Shalimar tar product. (iv) 'Hydroflame' of M/s Hydrotech Ltd.

Supply only Liquid water proofing compound .

Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.

S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed.

M & L for 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.

M & L for 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms ) complete all as specified and as directed.

S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed.

S&F in repairs 15 mm dia bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed.

S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.

S & F in repairs 15 mm dia Brass cromium plated shower rose of 125 mm long leg complete all as specified and as directed.

S&F in repairsGrating round 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed.

S&F in repairs Toilet Roll Holder with Stainless Steel. Make Jagur/Prayag complete all as specified and as directed.

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white with 'P' or 'S' trap including connection to drains (or outgoing pipes) and to the flushing pipes, complete all as specified and directed.

S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.

S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed.

S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and directed by Engineer-in-Charge.

Dismantling / taking down AC waste/vent pipes fixed to walls with all fittings/ accessories 100 mm dia pipes all as specified and directed by Engineer-in-Charge.

S&F, PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 110 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F,110 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directed by Engineer-in-Charge.

S&F, 110 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), all as speicfied and directed.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M&L for vitrified coloured tiles 10mm th (square/rectangular) polished area of each tile 0.36 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified and as directed.

Ditto as per item No 34 above but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and as directed.

M & L Glazed ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced.

Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (reinforced ) as in chajja complete all as specified and directed by Engineer-in-Charge.

M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.

M & L for 100 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed.

M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement and pigment over 50 mm thick sand cushion complete all as specified and as directed.

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each.

–Ditto- as item No 42 above but n.exc. 1.50 sqm each

Cutting holes in brick walls exc half brick but n exc one brick, built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required -depth of embedded portion of holdfast or lugsmeasured from the face of jamb into the wall - exc. halfbrick but n exc. one brick.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm

M/L for PCC 1:2:4 type B1 in door frame filling all as specified and directed.

S&F factory made 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood.

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S&F aluminium anodised window and ventilator shutter (two or three track) aluminium shutter sliding window fully glazed fitted with one side visible glass of 5.5 mm thick shutter frame size 44x24x1.8 mm including chowkaht of size 80x40x1.8 mm and sliding fly proof shutter (using stainless steel wire cloth of gauge 0.50 mm dia and aparture 1.18 mm ) with three track including aluminium grill on out side throughout and providing necessary jointing cleats, glazing clips, ribber packing, anodised aluminium snap beading handle screw complete all as specified and as directed

S&F aluminum powder coated ventilator shutter with frame sliding type two track way with or without sash bars of aluminum section weighing 0.55 Kg per Sqm including necessary joining clits , glazing clips, rubber packing, alu. Snap beading , screws, aluminum fittings, suitable handles complete .

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as directed by Engineer -in -charge.

S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00mm complete all as specified and directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 sqm in each pane

S & F 150 mm size extruded aluminium alloy handles,fabricated type anodised.

S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 150mm

S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 100mm

S& F 100 mm But hinges, stainless steel, bright polished and fixed, type B-11 all as specified and directed

S & F aluminium alloy , anodised , sliding door bolt with hasp , staple ( bolt type ) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed - length of bolt 250 mm

Dismantling of boarding, any description and fixed in any position with nails complete all as specified and directed.

Dismantling timber fillets under 40 Sq.cm in section unframed work , in any position complete all as specified and directed.

S & F in repairs pre-laminated particle board 25mm thick exterior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl 6mm thick teak wood lipping patti complete.

S & F 30 mm thick Second class hard-wood Boarding fixed with nails in any situation complete all as specified and directed.

S & F of 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc 13 & not exc 25 sqcm complete all as specified and directed.

S&F in repairs continuous Piano type hinges mild steel bright finish or electrogalvanised (width of flap 40 mm when open) complete.

S & F of 100 mm size brass hasp and staple safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed.

M & L for Rendering 05 mm thick cement plaster on concrete surface of ceiling in cement mortor 1:3 shall be even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or conrete wall surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls over a coat of primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint on walls over a coat of primer on plastered surfaces complete all as specified and as directed.

M&L for preparation for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of 10cm width or girth.

M&L for preparation of New steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

Complete removal of existing treatment from old decorated surfaces of walls prepration of surfaces and applying two coats of distemper oil emulsion over and including a coat of priming plastered complete all as specified and directed by Engineer - in - Charge.

Complete removal of existing treatment from old decorated surfaces of walls prepration of surfaces and applying two coats of cement base paint over and including a coat of priming plastered complete all as specified and directed by Engineer - in - Charge.

M&L applying one coat of white wash on old decorated surfaces of ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.

M & L for excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M & L for Cement concrete in post holes type D-2 1:4:8 (40 mm graded aggregate)

S & F of rolled mild steel work in main and cross beams hip and jack rafters ourlins where connected to commom rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to Fe-290 Grade E-165 complete all as specified and directed.

Rolled mild steel plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes with out any attachment Fe 410 W Gde E 250 quality A.

S&F aluminium powder coated shutter sliding type two track way with frame which include two mesh shutter including necessary joining clits, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fittings, suitable handle including 0.36mm dia and 1.4 mm width of aperture SS wire mesh fitting etc complete all as specified and as directed by Engineer-in-Charge. Note Frame JINDAL Section - 20669 Shutter JINDAL Section 20577

Dismantling barbed wire any description complete all as specified and as directed by Engineer-in-Charge

Dismantling fencing wire mesh , any tpe complete all as specified and directed.

Dismantling post, struts , (wood , steel or Rcc) any section incl. taking out embede portion in concrete or brickwork and making disturbed portion good complete all as specified and as directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard dense soil complete all as specified and as directed by Engineer-in-Charge

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified and as directed by Engineer-in-Charge.

S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 any size complete all as specified and as directed by Engineer-in-Charge.

S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 11 to 15mm dia of shank complete all as specified and as directed by Engineer-in-Charge.

Supply only chain link MS galvanised fencing incl line wire mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire complete all as specified and as directed by Engineer-in-Charge.

Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as specified and as directed by Engineer-in-Charge.

M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

S&F GI two strand, steel barbed wire 2.24mm dia, narbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, inlc securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc. complete all as specified and as directed by Engineer-in-Charge. Note:- (Each line of wire to be measured.)

M&L two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth complete all as specified and as directed by Engineer-in-Charge.

Use and waste of form work to sides of beam bars rough finished surfaces of concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (using 20 mm graded stone aggregate) as in foundaiton, filling, mass concrete under fencing complete all as specified and directed.

E/M Portion

Taking down carefully copper/aluminium point wiring (light, fan, socket or ower) complete,(fittings such as switches, ceiling roses,pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc.

Taking down unserviceable main switches ,DBs alongwith teak wood boards etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified

M&L for point wiring complete including single core PVC insulated and unsheathed type flexible bright unsheathed multi stranded 1.5sqmm copper conductor FRLS PVC casing caping and surface/concealed PVC Conduit & accessories having ISI mark to be fixed with proper screws/ (MS steel strips if required ) including all accessories/ fittings/ junction boxes /inspection covers etc including hard PVC board of required size fixed with wall surface by means of brass screws and sunk/cupwashers, for mounting of switches fan regulators etc including 1.5 sqmm (22/0.30mm) 1100 V grade PVC insulated, unsheathed flexible muliti stranded copper conductor FRLS cable as continuous earthwire connected to metallic bodies of luminaries/fans etc. at one end and to common earth duly at other end for.

One light point controlled by one one way switch

One Fan/Exhaust Fan point controlled by one switch

One switch socket 5 pin 5 Amps flush type on same board.

One switch socket 5 pin 5 Amps flush type on Independent board.

- do - all as per item No 03 above but with 2.5 sqmm (36/0.3mm) FRLS cable for one socket 5 pin 15Amps flush type on independent board with including earthwire complete.

S & F Switch piano flush type single pole one way 230V 6Amps

S & F Socket outlet 2 in 1 , 3 pin 5 Amps flush type 230V S.P. multipurpose type

S & F Switch socket combination flush type multi purpose 5A/16A, 5 in 1controlled by one switch 230V.

S & F in repair Lamp holder ( angular type) , PVC/Polycarbonate type batten fittings insulated body with back plate

S & F ceiling rose surface PVC 50 mm dia three terminals including PVC mounting block, white/lvoury /Urea finish.

M&L in repair for stepped type electronic fan regulator flush type on the existin phenolic laminated sheet etc as required for ceiling fan 230 volt AC supply, 50HZ 1200/1400 mm sweep

M & L MCB DB SPN sheet metal double door enclosure mounted on teak wood board of suitable size for mounting MCB 230 Volts with 200 Amps rated bus bar 8 way

S & F MCB SPN 5-40 amps, 240Volts 10KA

S & F MCB SP 5-40 amps, 240Volts 10KA

S & F Tube light fitting batten for LED 1X20W tube with LED tube rod retro bar professional CW 6500K cool white complete with all accessories prewired and connecting up twin core twisted flexible copper conductor cable with suitable size Make : Havells Cat part No: LHEXACP7IN1W020 and equavalant of Bajaj /Philips / Crompton

S & F in repair LED lamp pin type 09 watt Make : Havells Cat part No LHLDEUEEMC8R009 and equavalant of Bajaj /Philips / Crompton

Taking down ceiling fan 1200/1400 mm sweep / exhaust fans including disconnection of electric connection and removing the blades in safe for reinstalling

Supply & fix ceiling fans complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated BLDC

S & F LED light fitting for building security/street light fitting 1x 20 w, 230 V,complete with all accessories internally pre-wired and including connecting up with 2.5 sqmm twin core flexible copper cable for connection from ceiling rose to fitting including LED light and GI bracket medium grade of 1.2 meter shaped to 120 degree for fixing of fitting on wall with clamps and Make : Bajaj / philips / Crompton

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

Dismantling /disconnecting LT cables of any size with accessories. Old unserviceable of any type broken or damaged cables fitting on poles / laid in trenches and keeping aside for further disposal.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core sizes:- Make :- Havells/ Polycab/ Gloster

M & L for DWC HDPE Pipe 50 mm outter dia for UG cable protection passing of cables on wall or floors with shaddling and under ground and all as specified and directed by Engineer-in-Charge.

Excavation Soft / loose soil in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 60cm×60cm×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel,earth wire protected by GI pipe 15 mm dia 'light grade' including charcoal dust, common salt, excavation & earth work, PCC Pit with 1:3:6 type C-1, 40 mm thick RCC cover in 1:2:4 type B-1 reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel & GI watering pipe 'light grade' 20 mm bore all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

AVS CONSTRUCTION

DR J S CHADHA AND SONS

Star Construction

RAMESH PATIL

KARPE AND SONS CONSTRUCTION

Ganesh Sonajirao Garje