Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.3 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹40.3 L+₹99,677 (2.54%)Rejected-AOC 10 ABHAY GARH SCHEME CENTRAL SCHOOL AIR FORCE JODHPUR 342001 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-AOC Reject | |
| 3 | L3₹40.5 L+₹1.2 L (2.95%)Rejected-AOC | L3 | Rejected-AOC Reject | |
| 4 | L4₹40.8 L+₹1.5 L (3.87%)Rejected-AOC | L4 | Rejected-AOC Reject | |
| 5 | L5₹42.6 L+₹3.3 L (8.44%)Rejected-AOC INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L5 | Rejected-AOC Reject |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
22 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
SPL REPAIRS TO BLDG NP143 (VTC) AT ZONE A AHMEDABAD
2022_MES_555697_1
8296/E8
Open Tender
Civil Works
Works
270 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹89,000
Yes
1 Dec 2022
3 Oct 2022
24 Oct 2022
3 Oct 2022
22 Oct 2022
8 Oct 2022
3 Oct 2022 - 8 Oct 2022
Amount
Demolition of brick work built in CM including all quions, arches, pillars etc complete.
Demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified directed.
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition)Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete.
Dismantling timber scantlings 40sq. cm and over in section, in any position
Dismantling boarding , ceiling , any description fixed in any position with nails
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified.and directed.
Dismantling asbestos cement (corrugated or semi-corrugated etc.) sheets in roof covering complete all as spd and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete.
M&L Cement Concrete type B-1(1:2:4 ) using 20mm graded stone aggregate as in levelling course complete all as specified directed .
M&L for RCC type B1 1:2:4(20mm graded aggregate) for Beams, cantilevers,bressummers, lintels over 1.5m span.
Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete
M&L brick work with sub class "B"brick (old size) straight or curved on plan exc 6m mean radius in CM 1:6 complete.
M&L brick work with sub class "B"brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1.4 exc 6m mean radius complete .
M&L for cutting and chaseing in brick wall built in cement mortar for concealed GI tubing and making good in CM, 1:4 not exc 10cm in girth.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps/jambs/pillars/ window cills/ cooking platforms etc and set in cement mortar (1:4) ncluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete.
Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete.
M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.
M&L for Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drawing complete.
S&F in repair solid PVC wall lining/paneling consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame with 5 mm PVC fillet of width 35 mm for wall panelling for fixing to wall to make PVC frame as per specified and directed.
S&F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed.
S&F Mild steel butt hinges medium weight 100mm long fixed with screws to timber frame complete all as specified and as directed.
S&F alumunium handle fabricated type anodised 150mm long complete.
S&F in repair 25mm dia CP Harrison curtain rod/rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. at ends complete.
S&F brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete.
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, framed for ceiling; ladders; railings; framework of water tanks and similar work conforming to Fe-290 (Gde E- 165) complete.
M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete.
M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete.
M&L Rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connectiong plates including cutting, grinding, welding etc Fe-290 (Gde E-165) complete
S&F powder coated anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete
S&F powder coated anodised Aluminium alloy sections 3 track sliding shutters windows with frames Series-B (18 mm) and duly fitted with & including neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements etc. complete.
S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete.
S&F aluminium powder coated section size 100 x 44 x 1.48mm for partition walls in panels square or reqtangular section all other members channel tracks including gasket aluminium cleat 6 mm dia rounded bars, 5mm thick tinted glass panes including aluminium handle hinges and locking arrangement, sliding rail, rollersor fixed as directed by engineer in charge etc., complete
S&F designer false ceiling made of 12 mm thick gypsum board over and including all GI grid of standard quality to hold false ceiling including two coats interior emusion of any colour over one coat of primer and two coats of acrylic putty average 1.5mm thk complete.
S&F 4mm thick coloured textured designer ceiling board of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600mmx600mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyster coated in off white/white in colour complete
S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , including Ridge fixed with self tapping screws complete.
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete
S&F 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete.
S&F in repairs for 18/19mm thick interior grade Block boards, grade 2 quality, decorative type with decorative face veneer on one face solid core, general purposes type fixed with screws to timber frame work complete.
M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, on wall dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete
M&L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.11 Sqm but n exceeding 0 .18 Sqm, set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors complete.
M&L for Vitrified Ceramic tiles light shade 10 mm, (square or rectangular) area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete
M&L for Vitrified Ceramic tiles light shade 10 mm, (square or rectangular) area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick screed bed CM 1:4 complete
Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete.
M&L for 15mm thick rendering on other than fair faces of brick/ concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete.
M&L for 10 mm thick rendering on surfaces other than fair faces of brick/ concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete
M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over 1.5mm average thk wall care putty & alkali resistant primer complete
M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of white cement primer complete.
M&L for complete removal of existing treatment and preparation old treated surface of wall and applying two coats of cement base paint complete.
M&L for complete removal of existing treatment and applying two coats of oil bound distemper with 1.5mm average thk wall care putty and priming plastered and other surfaces with alkali resistant priming paint walls & preparation of surfaces complete
M&L for preparation of old painted wooden surfaces of any description postion and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete
M&L for preparing old steel & iron surfaces of any description over 10cm in width or girth and applying a coat of synthetic enamel paint complete.
Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site complete
S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete.
Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site complete
S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete.
Taking down eaves Gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete.
S&F in replacement 500 ltrs rotational moulded polyethenine water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR complete.
S&F in repairs CP bib taps chromium plated 15mm bore pipe with captain head complete.
S&F in repairs Pillar taps, fancy type cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed15 mm dia bore pipe. complete
S&F in repairs Angle valve cast copper alloy with capstan head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete.
S&F in repairs Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete.
S&F in repairs ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete.
S&F in repairs 15mm size PVC connections with PTMT nuts of length 450mm and fixed complete.
S&F in repairs 75mm PVC SWR pipes single socketed in any length with laid in trenches or in floor complete.
S&F in repairs 110mm PVC SWR pipes single socketed in any length laid in trenches or in floor complete.
S&F in repair PVC (SWR) bends any radius 110mm dia complete.
S&F in repair PVC (SWR) bends any radius 75mm dia complete.
S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.
S&F in repairs vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete all as specified and as directed.
S&F in repairs 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and direction.
S&F in repairs PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete
S&F in repairs brass CP 2 way bib cock with Wall Flange, fixed in 15mm bore pipe of make jaquar type cat COP-041PM complete.
S&F in repairs soap dish & similar to jaguar make cat No. AKP-35731P complete.
S&F in repairs Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook & similar to Make jaguar Cat no ALD-573 complete
S&F in repairs Corner Glass Shelf (with Bracket) & similar to Make jaguar cat can-1173 complete
S&F in repairs Toilet Roll Holder with Stainless Steel Flap & similar to Make jaguar cat CAN-1153S complete
Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.
M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following
M&L for Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm with 3 mm thick phenolic laminated white sheet cover for mounting of Piano Type switches, sockets, fan regulators for One light / Exhaust fan point controlled by one switch complete
All as per Item No 98 above but for One fan point controlled by one switch.
All as per Item No 98 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per Item No 98 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.
All as per Item No 98 above but for one 16 amp socket outlet modular type for controlled by one switch on independent board with conductor cable 2.5 sqmm complete.
S&F modular switch one way 6 amp 1 module complete
S&F modular switch one way 16 amp 1 module complete
S&F modular socket 6 amp 2/3 pin combined 2 module complete
S&F modular socket 6/16 - 2/3 pin combined 2 module complete
S&F modular hum free electronic step fan regulator, 100 watt 2 module complete
S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete
S&F in replacement MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete.
S&F in replacement MCB distribution board ETPN, 415 volts 4 way powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43- IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.
S&F 20W LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 & similar to Make Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " complete.
S&F in repairs LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection with fixing arrangement and connections & similar to Bajaj cat Ref no. BCLST 20 W LED I code 169829 type or LST 20 CDL of make crompton type complete.
S&F in repair energy efficient recessed mounted LED luminaries suitable for for 2'x2' grid 35/36 watt 220 V AC ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white color PVC insulated & sheathed three core flexible multistranded copper conductor cable & similar to cat LCTLRN 36 CDL of crompton make type complete.
S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable & similar to Philips cat ref no. WT202W LED6S CW PSU S1 PC complete.
S&F LED fixture 8 watt including connection & similar to Philips LED LINEA cat ref no. BN 550 WLED 6 - 6500 complete.
S&F recess/ suspended LED round panel light 09 watt with powder coated rim 09 watt high efficiency designer recessed mirror optic luminary with ceiling cut out size 9 watt complete, 6500K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.95 and life> 15000 hrs & similar to Make Crompton model no LSDRSD-9W-CDL/NW/WW complete.
M&L in replacement submain wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in and including concealed PVC conduit 20mm dia bore, medium grade, ISI marked ivory colour along with accessories and making good to the disturbed wall surfaces to match with existing surface complete
M&L in replacement submain wiring 2x6 sqmm alongwith 1x6 sqmm earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit 20mm dia bore, medium grade, ISI marked ivory colour along with accessories and making good to the disturbed wall surfaces to match with existing surface complete
M&L in replacement submain wiring 4x6 sqmm alongwith 2x6 sqmm earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit 20mm dia bore, medium grade, ISI marked ivory colour along with accessories and making good to the disturbed wall surfaces to match with existing surface complete
S&F in repairs Modular AC box with 20A SP MCB plastic enclosure & unbreakable, heavy duty with suitable plug top & similar to cat DHBMCSN0251016 of make Havells type complete.
M&L in repairs pipe in pipe chemical earthing with GI pipe electrode 3.0 m long having outer pipe nominal dia 80 mm & inner pipe nominal dia 50 mm duly filled with highly conductive and anti corrosive compound of required quantity having chemical composition Bentonite 40%, copper sulphate 20%, Gypsom 5%, Graphite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150 mm dia surrounded by soil friendly backfill compound non soluble in water including connection with galvanised earth wire 4 mm dia from pit to main MCB DB protected in 15 mm GI pipe light grade, making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8 mm dia MS bars 3 Nos both ways with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 1.0 ohm complete.
S&F in replacement MCBs Single pole 6 to 16 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete
S&F in replacement MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408636 complete
S&F in replacement MCBs Four pole 63 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408702 complete
Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and keeping in MES store yard.
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan.
RISING ELECTRICALS
SNEH TRADERS
UNIT ENGINEERS
DMA PROJECTS
Shreeganesh Construction
r s corporation
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .