Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹5.9 LAccepted-AOC | ₹5.9 L Quoted ₹6.1 L | l1 | Accepted-AOC Bidder Lower side award amount |
| 2 | l2₹6.4 LRejected-AOC | ₹6.4 L | l2 | Rejected-AOC Bidder higher side amount |
| 3 | l3₹6.6 LRejected-AOC VILLAGE PO PALKWAH TEHSIL HAROLI DISTT UNA HP | UNA | HIMACHAL PRADESH | 174301 | ₹6.6 L | l3 | Rejected-AOC Bidder higher side amount |
| Sl No | Description | Qty | Unit | ARUN INFRATECH L2 | SUMIT KUMAR L3 | M/S SHYAM ENGINEERS L1 |
|---|---|---|---|---|---|---|
| 1.00 | Transportation of suitable truck mounted DTH & ODEX/Percussion/Calyx/R.C.drilling rigs along-with necessary accessories etc.to the site of workand erection of rig including levelling etc.complete in all respects as per the directions and satisfactions of the Engineer-in-Charge. | 2 | Nos. | 5,000 ₹10,000 | 6,000 ₹12,000 | 4,000 ₹8,000 |
| 2.00 | Drilling bores of 152mm.dia as per IS:2800-1979 using ODEX(TUBEX) attachment required drilling in collapsible strata conglomerate boulders,pebbles,gravels,silt,clay etc.including cost of attachment consumable stores,bits,water POL.etc.complete with system of simultaneous lowering of 125mm.nominal bore,5.0mm.thick MSERW.fincut casing pipe which will be welded together using 2.5mm.(or) 3.25mm.dia Advani Derlikon electrodes,with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded,inclusive of the cost of bio-degradable and non-toxic foam flush etc.complete in all respects as per the directions and satisfactions of the Engineer-in-Charge.(2X85 =170 Metres). | 170 | Metres | 1,600 ₹2.7 L | 1,650 ₹2.8 L | 1,550 ₹2.6 L |
| 3.00 | Supplying and lowering IS-Marked 125mm.N.B.5.00mm.thick fincut MSERW.casing pipes as per IS-4270-2001 and requirement of ODEX attachment from approved manufacturers complete in all respect as per the directions of the Engineer-in-Charge.(2X85 =170 Metres). | 170 | Metres | 1,500 ₹2.5 L | 1,550 ₹2.6 L | 1,480 ₹2.5 L |
| 4.00 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per the directions of the Engineer-in-Charge. | 2 | Nos. | 5,200 ₹10,400 | 5,500 ₹11,000 | 5,000 ₹10,000 |
| 5.00 | Collection and preservations of soil samples in polythene bags complete in all respects as per the directions of the Engineer-in-Charge. | 2 | Nos. | 50 ₹100 | 70 ₹140 | 30 ₹60 |
| 6.00 | Development of bore well and yield testing with Air Compressor through V-Notch and dis-infection etc.complete in all respects as per IS:28001979 and as per directions of the Engineer-in-Charge. | 2 | Nos. | 4,700 ₹9,400 | 5,000 ₹10,000 | 4,500 ₹9,000 |
| 7.00Supplying and lowering IS-Marked riser pipes medium class screwed and socketted and welded as per IS-1239(Part-I)1990 with uptodate ammendments,electric resistance welded including cost of all cuttings,threadings and welding,whenever required,in random lengths of 3 metres inclusive of transportation charges to the site complete in all respects as per the directions of the Engineer-in-Chrge.The seamless sockets shall be provided as per IS-13-56:1991(2X60 =120 Metres). | ||||||
| 7.10 | 32mm.dia GMS.Pipes. | 120 | Metres | 380 ₹45,600 | 400 ₹48,000 | 350 ₹42,000 |
| 8.00 | Supplying and erection of IS-Marked India Marked-II deep Well hand pumps ( 32mm) conmorming to IS-9301 consisting of pump head assembly,cylinder assembly and seven connecting rods complete in all respect,for installation upto 60 Metres as per the directions of the Engineer-in-Charge. | 2 | Nos. | 16,000 ₹32,000 | 17,000 ₹34,000 | 15,000 ₹30,000 |
| 9.00 | Providing and fixing of extra connecting rods each of 3 Metres length in hand pump as per site condition complete in all respects as per the directions of the Engineer-in-Charge. | 2 | Nos. | 350 ₹700 | 400 ₹800 | 300 ₹600 |
Tender Value
₹6.2 L
EMD Value
₹12,440
Closing Date
20 Feb 2026, 11:00 amClosed
Anund Blouria
Executive EngineerJal Shakti Division Nurpur
Drilling by Hand Pumps with DTH/ODEX/Percussion/ Calyx/Portable Rigs 85 mtrs deep).
2026_HPIPH_128099_1
EE-JSV--Tender-5848-52 dt 10-02-2026
Open Tender
Civil Works
60 days
Nurpur
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
₹12,440
12 Mar 2026
10 Feb 2026
20 Feb 2026
10 Feb 2026
20 Feb 2026
10 Feb 2026
Transportation of suitable truck mounted DTH & ODEX/Percussion/Calyx/R.C.drilling rigs along-with necessary accessories etc.to the site of workand erection of rig including levelling etc.complete in all respects as per the directions and satisfactions of the Engineer-in-Charge.
Drilling bores of 152mm.dia as per IS:2800-1979 using ODEX(TUBEX) attachment required drilling in collapsible strata conglomerate boulders,pebbles,gravels,silt,clay etc.including cost of attachment consumable stores,bits,water POL.etc.complete with system of simultaneous lowering of 125mm.nominal bore,5.0mm.thick MSERW.fincut casing pipe which will be welded together using 2.5mm.(or) 3.25mm.dia Advani Derlikon electrodes,with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded,inclusive of the cost of bio-degradable and non-toxic foam flush etc.complete in all respects as per the directions and satisfactions of the Engineer-in-Charge.(2X85 =170 Metres).
Supplying and lowering IS-Marked 125mm.N.B.5.00mm.thick fincut MSERW.casing pipes as per IS-4270-2001 and requirement of ODEX attachment from approved manufacturers complete in all respect as per the directions of the Engineer-in-Charge.(2X85 =170 Metres).
Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per the directions of the Engineer-in-Charge.
Collection and preservations of soil samples in polythene bags complete in all respects as per the directions of the Engineer-in-Charge.
Development of bore well and yield testing with Air Compressor through V-Notch and dis-infection etc.complete in all respects as per IS:28001979 and as per directions of the Engineer-in-Charge.
Supplying and lowering IS-Marked riser pipes medium class screwed and socketted and welded as per IS-1239(Part-I)1990 with uptodate ammendments,electric resistance welded including cost of all cuttings,threadings and welding,whenever required,in random lengths of 3 metres inclusive of transportation charges to the site complete in all respects as per the directions of the Engineer-in-Chrge.The seamless sockets shall be provided as per IS-13-56:1991(2X60 =120 Metres).
32mm.dia GMS.Pipes.
Supplying and erection of IS-Marked India Marked-II deep Well hand pumps ( 32mm) conmorming to IS-9301 consisting of pump head assembly,cylinder assembly and seven connecting rods complete in all respect,for installation upto 60 Metres as per the directions of the Engineer-in-Charge.
Providing and fixing of extra connecting rods each of 3 Metres length in hand pump as per site condition complete in all respects as per the directions of the Engineer-in-Charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
form_6.pdf
Tender Documents • 0.11 MB
Termsandconditions.pdf
Tender Documents • 0.19 MB
BOQ_189222.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid