WBHD/EE/ED-II/NIQ-10/24-25

Amount

"C" - Type Flats (For 12 nos. Flats): Dismantling the existing old & unserviceable Electrical wiring, damaged main switch, switch boards and mending good the damages as to G.S.

Supplying and fixing Sheet steel Main Switches on flat iron frame on wall, 240V DP with fuse on L&N , 32A (Make - Havells/Anchor /HPL/Standard)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make - RR Kabel/Havells/KEI/Mescab) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC (Energy meter to Main Switch)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works , 25mm size (Energy meter to Main Switch)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+10 way, 10 nos. 6-32A SP MCB, 40A DP Isolator (Make - Legrand/Seimens/ABB)

Distn. wiring with 2 x 36/0.3 (2.5 sqmm) single core stranded copper conductor PVC insulated and unsheathed copper wire (Make - RR Kabel/Havells/KEI/Mescab) in 19mm dia 3 mm thick polythene pipe with 1x22/0.3 (1.5sqmm) PVC insulated and unsheathed coper wire as ECC, complete with all accessories embedded in wall (for 20 A plug point- Power plug pt.) including Geyser

Cutting channel of 31 mm x 31 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works, 13 mm dia 3 mm thick polythene pipe without earth continuity wire….Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1.5 sqmm) Including Aqua Guard point. (for 6A plug point- Separate plug pt.)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) for ECC in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [only PVC casing-capping on ceiling and remaining portion concealed] [ 2 Nos. Bedroom + Bathroom+Kitchen + Balcony] Total No. of points= 16 X 12 = 192 ( including Stair case) (Av. run – 6 Mtrs.)

Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping on surface and Switch board concealed] (On Board)

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150 x 100 x 65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. (Aqua Guard)

Distn. Wiring by 1.1 K.V. Gr. 2X 56/ 0.3 (4 sq.mm.) + 1 X 36/0.3 (2.5 sq.mm) single core stranded “FR” PVC insulated and unsheathed copper wire (Finolex /Havells/K.E.I/Mescab/R. R. Kabel [Unilay] Make) in 19 mm. dia 3 mm. thick polythene pipe complete with all accessories embedded in wall to15 Amp. Power plug points as per G.S. (For AC)

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire.(FOR-AC)

Supply & Fixing 240 V, 25 A, Modular type starter (MK-Northwest) with 25A Modular switch type DP MCB (C-Curve)and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(FOR AC)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works, 19 mm dia 3 mm thick polythene pipe without earth continuity wire & Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC [ for sub main cable].

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl.bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 175 mm x 100 mm x 65 mm ... Supply & Fixing 240 V, 2nos. 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required ... Supply & Fixing 240 V, 2nos. 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc. (Separate Plug Point)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (Power Plug Point)

S & F 240 V, 20A, plug socket (Brand approved by EIC) on sheet metal switch board embedded in wall in side the bathrom & S/F 240 V, 20A, Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall out side of the bathrom incl. S & F 2 nos.100 x 100 x 65 mm. MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for socket by cutting bakelite/perspex cover and making necessary connections as required. (For geyser)

Excavation of soil for installation of Earth Electrode and filling & ramming For Soft Soil

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 5 mm x 6 mm on wall having clearance of 6 mm from wall 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes A).2.5 sqmm

B). 4 sqmm

C). 6 sqmm

"D" - Type Flats (For 11 nos. Flats): Dismantling the existing old & unserviceable Electrical wiring, damaged main switch, switch boards and mending good the damages as to G.S.

Supplying and fixing Sheet steel Main Switches on flat iron frame on wall, 240V DP with fuse on L&N , 32A (Make - Havells/Anchor/HPL/Standard)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make - RR Kabel/Havells/KEI/Mescab) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC (Energy meter to Main Switch)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works , 25mm size (Energy meter to Main Switch)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+10 way, 10 nos. 6-32A SP MCB, 40A DP Isolator (Make -Legrand/Seimens/ABB)

Distn. wiring with 2 x 36/0.3 (2.5 sqmm) single core stranded copper conductor PVC insulated and unsheathed copper wire (Make - RR Kabel/Havells/KEI/Mescab) in 19mm dia 3 mm thick polythene pipe with 1x22/0.3 (1.5sqmm) PVC insulated and unsheathed coper wire as ECC, complete with all accessories embedded in wall (for 20 A plug point- Power plug pt.) including Geyser

Cutting channel of 31 mm x 31 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works, 13 mm dia 3 mm thick polythene pipe without earth continuity wire….Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1.5 sqmm) Including Aqua Guard point. (for 6A plug point- Separate plug pt.)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) for ECC in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [only PVC casing-capping on ceiling and remaining portion concealed] [ 2 Nos. Bedroom + Bathroom+Kitchen + Balcony] Total No. of points= 16 X 11 = 176 ( including Stair case) (Av. run – 6 Mtrs.)

Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping on surface and Switch board concealed] (On Board)

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150 x 100 x 65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. (Aqua Guard)

Distn. Wiring by 1.1 K.V. Gr. 2X 56/ 0.3 (4 sq.mm.) + 1 X 36/0.3 (2.5 sq.mm) single core stranded “FR” PVC insulated and unsheathed copper wire (Finolex /Havells/K.E.I/Mescab/R. R. Kabel [Unilay] Make) in 19 mm. dia 3 mm. thick polythene pipe complete with all accessories embedded in wall to15 Amp. Power plug points as per G.S. (For AC)

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire.(FOR-AC)

Supply & Fixing 240 V, 25 A, Modular type starter (MK-Northwest) with 25A Modular switch type DP MCB (C-Curve)and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(FOR AC)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works, 19 mm dia 3 mm thick polythene pipe without earth continuity wire.... Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC [ for sub main cable]

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl.bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 175 mm x 100 mm x 65 mm ... Supply & Fixing 240 V, 2nos. 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required ... Supply & Fixing 240 V, 2nos. 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc. (Separate Plug Point)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (Power Plug Point)

S & F 240 V, 20A, plug socket (Brand approved by EIC) on sheet metal switch board embedded in wall in side the bathrom & S/F 240 V, 20A, Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall out side of the bathrom incl. S & F 2 nos.100 x 100 x 65 mm. MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for socket by cutting bakelite/perspex cover and making necessary connections as required. (For geyser)

Excavation of soil for installation of Earth Electrode and filling & ramming For Soft Soil

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 5 mm x 6 mm on wall having clearance of 6 mm from wall 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes A).2.5 sqmm

B).4 sqmm

C) 6 sqmm

Add G.S.T 18% on aggregate amount of BOQ item No 1.00 to 46.00

Add LW Cess 1% on aggregate amount of BOQ item No 1.00 to 46.00 (after add G.S.T 18 %)

S.S. ELECTRICAL ENTERPRISE (BID ID -5908799)

M/S. KARAN ENTERPRISE (BID ID -5918768)