Providing Repairs and Maintenance to New B/2 Quarters on the O.U. Campus.

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Engineer-in-charge duly taking actual premeasurements before dismantling including all labour charges etc., complete.Old Cement mortor plaster.

Dismantling of Rough Shahabad Stone flooring on sand bed including labour charges for removing and stacking material with a lead of 100mts as directed by Engineer-incharge etc., complete for finished item of work.

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Engineer-in-charge duly taking actual premeasurements before dismantling including all labour charges etc., complete. b)Unreinforced cement concrete up to 15cm thickness

Removing the existing Asbesto Corrigated Sheets carefully and stocking the material as directed by the departmental officers useful for reuse including cost of all labour charge, incidental and operational charges, transporation to stores etc., complete for finished item of work.

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Engineer-in-charge duly taking actual premeasurements before dismantling including all labour charges etc., complete. Brick masonry

Reinforced Brick Masonry for Partition walls (11.0 CM Thick) in CM (1:4) prop. (Cement : Screened Sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where was applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, sales & other taxes on all materials, all operational, incidental charges such as labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., but excluding cost of steel and its fabrication charges etc., complete for finished item of work.

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., complete for finished item of work.

Plain Cement Concrete (1:5:10) (Cement: Fine Aggregate (unscreen sand) : Coarse Aggregate (Metal) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work.

Plain Cement Concrete (1:2:4) (M20) Grade Nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., for finished item of work.

Flooring with Soluble Salt Porcelain Vitrified Tiles Screen Printed tile of 1st quality and make as approved by Engineer-in-charge of size not less than 600 mm x 600 mm ( Khajaria / Somani / Jhonson), 8mm to 10mm thickness with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge and Providing and fixing flooring with full depth jointing and pointing to the Vitrified / Ceramic Tile flooring in specified thick for tiles of any sizes with epoxy emulsion grout / synthetic / resin adhesive in width of 3-5 mm with Nylon spacers excluding cost of tiles. including cost of on all materials, cost of Epoxy emulsion grout and all labour charges for mixing laying tiles to required slope as directed by the Engineer- in-charge etc.,etc., complete for finished item of work.

Supplying, fitting and placing thermo Mechanically Treated (TMT) HYSD Fe- 500 / 500D / 550 D Steel as per IS 1786-1979 manufactured by Primary producers like TATA, SAIL, VSP, JSW, Jindal and Shyam Steel as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of etc., complete for finished item of work in all floors

Providing skirting to internal walls to 12.5 CM height with Nano polished / stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge (Khajaria / Somani / Jhonson), length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.

Flooring with Non-skid full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of for finished item of work

Providing dadooing to walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM (1:5) prop, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge

Providing Cladding to Walls / Risers of Steps with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring stones set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete etc., complete for finished item of work ('Z black granite).

Roofing with 6 mm thick Corrugated Asbestos Cement Sheets, fixing with G.I ‘J’ bolts & nuts 8 mm dia G.I plain washers complete etc., complete for finished item of work, but excluding the cost of purlins, rafters, trusses & including cost of conveyance of all materials and labour charges etc., complete for finished item of work– upto 600 pitch

Supplying and fixing Mild Steel 50mm dia nominal bore 3.65 mm thick (OD 60.30) Medium Grade properties & weight as per IS 1239 (Part I) - 1979 mark MS Tube for fixing of GI Sheet including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work for stair case head room roof.

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 15mm PVC connections with brass union nuts CP coated and Brass body CP finish Bib Tap of not less than 300 grams weight with quarter turn spindle including cost and conveyance of all materials to site, etc., complete for finished item of work for all floors.

Supplying & fixing of 4" (101.6 mm ) Nahany Trap ( Without Jali with inlet) UPVC/SWR Pipe fittings etc., complete for finished item of work

Supplying and fixing of mesh door shutter of Alluminium frame shutter of size 30x12mm thick incluidng fixing with stainless steel mosquito fly proof mesh of 20 guage jali of 304 grade SS of 14x14 grids / per square inch including labour charges of fixing etc. complete for finished item of work.

Supply and fixing Stainless Steel Mosquito proof mesh of 20 guage of 14x14 nuts per square inch with teak wood frame of size 40mm x 25mm duly fixing to the existing ventilators / openings including fixing the mesh with 25mm x 15mm teak wood beading including cost and conveyance of all materails, labour charges, screws, nails, wooden gutties including transporation etc., complete for finished item of work.

S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931

Providing and laying of 3mm thick app modified bitumen membrane treatment to the terrace duly [1]removing of existing tar felt. [2]cleaning of the surface from dirt, dust and other contaminations. [3]application of one coat of Bitumen primer [4]providing and laying of 3mm thick APP Modified Bitumen Membrane with 100 mm overlap fixing with butane torch.

Carting the debries with a lead of 2 KMs by mechanical Means including loading & unloading and all incidental and operational charges, labour charges etc., compete for finished item of work.

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and complete for finished item of work excluding dewatering charges as per SS 20B in Ordinary Soil - Manual Means.

RCM facia (50mm Finished thick) for Drop walls, Fins with Rabbit Wire Mesh & nominal reinforcement in CM(1:3) prop. of 25mm thick and 12 mm thick plastering in CM (1:5) & (1:3) prop. for 1st and 2nd coats respectively with dubara sponge finishing to all exposed faces, as directred by Engineer-In-Charge , including cost and conveyance of all materials to site, sales & othertaxes on all materials, operationals & incidental, cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and form work, lift charges etc., etc., complete for finished item of work but excluding cost of steel and its fabrication charges for finished item of work.

Painting to Old walls with 2 coats Acrylic based Oil Bound washable Distemper ( Asian / Berger / Nerolac / Saicoat / Indocem ) as approved by Engineer-In-Charge to give an even shade after thourughly brushing the old surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work - Internal walls in all floors

Painting with 2 coats with Acrylic Emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. (Asian / Berger / Nerolac) to Exterior Faces of Walls with approved make / shade and colour including cost and conveyance of materials like Acrylic Exterior paint to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall and applying two coats of Acrylic Exterior emulsion etc., complete for finished item of work in all floors.

Painting 2 coats with Ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. ( Asian / Berger / Nerolac / Indocem ) to Old Wood Work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work.

Painting 2 coats with Ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/ Lit. ( Asian / Berger / Nerolac / Indocem ) to Old Iron Work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work.