Repair of Shensha Club (Minority Community Center) in Ward No 03

Fitting fixing of IRON Grill door and window incl all fittings etc and complete

RCC work of M20 Grade with 20 mm sizeand down graded black hard granite chips including cost, conveyance and royalty of all materials, cost of all labour,T&P etc. complete including centering shuttering and dismentalled the centering material. Beam & Column

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

Brick masonary in fly ash brick in cm (1:6) with all cost, convency, royality etc and complete as per direction of E.I.C(Grill Gap/steel)

12 mm thick plaster in cm 1:6 per 1 sqm Plastering

16 mm thick plaster in cm 1:6 per 1 sqm

2.5 cm grading Concrete (1:2:2) on roof slab using 12 mm size downgraded chips with all cost convency rolyality etc and complete

6mm plaster in cm (1:4) to finish the smooth surface over RCC work including closed deep chipping with all cost, convency, royality etc and complete as per direction of E.I.C

Finishing walls with water profofing cement paint of approved shade on new work two coat to give an even shade.(weather Coat)and Cement Washing one Coat

2.5 cm thick AS Flooring with CC(1:2:4)using 12 mm size cbhg chips with all cost, convency, royality etc and complete as per direction of E.I.C

Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.) Group A 1.2.1-1.24.2

Supply and Fixing of 15W LED Bulb

Supply, Installation, Testing and commissionioning of 225mm sweep celling fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: Bajaj/Almonard)

Supply and Fixing of 5/6 Modular Switch & 3pin 5/6A Modular Socket on existing board (Existing) (1.25.1+1.25.4)

Recessed wiring to Fan point in Group B 1.2.2 - 1.24.2

Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard). 2x1.5 sqmm + 1 x 1.0 sqmm( 1 .8)

Supply, Installation, Testing, and Commissioning of 63 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK (2.15.3)

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.(3.5+3.6)