SPECIAL REPAIR TO CERTAIN BUILDINGS IN DOMESTIC AREA AT AF STATION UNDER GE AF TEZPUR

Amount

B/R Portion Material and Labour for rendering 10 mm thick with CM (1:4) on concrete surface including WPC, roof finished even and smooth without using extra cement over neat cement slurry @ 3 Kg /Sqm including taking down cement plaster including tarfelt from old concrete roof/ chajja and cleaning by picking, sweeping and washing down with water to remove dust, etc, and removal of debris from site complete all as specified and as dircted. Note: WPC measured and paid separately

Material and Labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry and 1:1 ( by weight) complete all as specified.

M&L providing water proofing treatment with APP based polymeric water proofing membrance 3 mm thick (minimum) weight 4.00 kg/sqm reinforced with polyster non woven fabric shall be laid over one coat of water based bituminous emulsion primer on the existing surface @ 0.40 Kg/Sqm duly thermofused by flame torch complete all as specified and directed. Note : The overlaps shall be of minimum 75mm on longitudinal direction and 100mm on transverse direction.

Supply only Water Proofing Compound.

M & L for Bitumastic gola, with 80/25 bitumen and coarse and mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screwes including Dismantling ofcorrugated steel sheeting any gauge any thickness incl nainital or similar pattern roof covering. complete all as specified and as directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling of plain steel sheeting any gauge any thickness incl nainital or similar pattern roof covering as specified and directed.

S&F 2nd class hard wood timber in fillets, square, rectangular or triangular in section, clean sawn, fixed with nails, sectional area exc 3 Sqcm but not exc 6 Sqcm including dismantling of timber scantling under 40 sqcm in section as in fillets, rails, posts, rafters, purlins etc unframed work complete all as specified and as directed.

S&F 2nd class HW plain fillets,square,rectangular, triangular in section exc 06 Sqcm but n exc 13 Sqcm wrought finished fixed with nail including ismantling of timber scantling under 40 sqcm in section as in fillets, rails, posts, rafters, purlins etc unframed work complete all as directed.complete all as directed

S&F anodized aluminium snap grid frame work with size of grid 605x605mm made out of aluminium ‘T’ section as main runner/ cross Tee and ‘L’ angle as wall angle for false ceiling including 4mm dia suspender, making position for light fittings, including provision of 6mm thick non asbestos fibre cement building, E-board (decorative) , fixed or laid/ inserted to timber/GI/ aluminium frame work with screw including dismantling of wall and ceiling boards (fibre pulp,insulation etc) or insulation boards/slabs any thickness incl cover fillets complete all as specified and as directed.

M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth (without using extra cement) including taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L rendering 15 mm thick on other than fair faces of brickwork in cement mortar 1:4 and finished the surfaces even and smooth without using extra cement mixed with and including water proofing compound @ 2% on top layer of 5mm thick taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M/L for brick work with sub class'B' bricks straight or curved on plain exc 6m mean radius built in cement mortar 1:6. including demolition of brick work built in cement mortar incl. all quoins, arches pillars and similar works complete all as specified and directed.

Disconnecting existing tanks exc 500 Ltrs n exc 1000Ltrs setting aside (for lowering if required) cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc and hoisting, reconnecting and refixing in position complete all as directed.

S&F 500 Ltr capacity rotational moulded three layred polyethyene water storage tanks (Cylindrical vertical with closed tap) hoisted and fixed in position all as specified in SSR Part-I including dismantling and removing to store old one complete all as specified and as directed

S & F in repair 20 mm dia Ball valves, high pressure of PTMT, with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

Taking down 15 mm bore GI tubing and connection including cleaning using pressurized water using pump for refixing complete all as directed.

-ditto- as per item no 17 above but 20 mm dia GI Tubing.

S & F 15 mm bore of galvanised tubing medium grade with all fittings and fixed complete to walls or laid in floors. complete all as directed.

-ditto as per item no 19 above but 20 mm bore of GI tubing.

Refixing of 15 mm bore old tubing and connections in new or old positions (walls, ceilings & floors) complete all as specified by engineer in charge

-ditto- all as per item no 21 above but 20 mm bore of GI tubing

Supply and fixing in repair 20mm Gun metal gate or globe valve with iron wheel head, screwed both ends for iron pipes or for unions complete all as specified and as directed.

S & F in repair of vitreous china squatting type orissa pattern 580 x 440 mm wash down closet with integral foot rests including connection to 'P' trap and to flushing pipe, anti syphonage pipe, each complete set in concrete all as specified and directed

S & F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including waste coupling 32 mm dia X 800 mm waste pipes, bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as directed.

S&F in repair Vitreous China wash hand basins white colour and flat back of size 550x400 mm excluding taps , including brackets, CP coupling and 32 mm dia X 800 mm waste pipes complete all as directed.

S&F in repair stop valve fancy type, chromium plated with long shank and cup (concealed type), screwed alloy, screed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed 15m bore pipe complete all as specified.

S&F in repair stop valve/ angular stop cock fancy type, chromium plated, screwed alloy, screed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed 15m bore pipe complete all as specified.

S & F as in repairs PVC connections 15 mm with PTMT nuts of length 600mm complete all as specified.

S & F as in repairs 15 mm bore pillar taps CP brass, with capstan heads, chromium plated, complete all as directed.

S & F as in repairs 40 mm bore high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed inclduing all fittings complete to walls, ceilings or in floors with MS clamps etc complete all as specified.

S & F in repairs 15 mm bore bib taps of CP Brass complete all as specified.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls inclduing taking down old one with all fittings complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls inclduing taking down old one with all fittings complete all as specified.

S &F 75 mm bore PVC (SWR) bends any radius with access door complete all as specified.

S & F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified.

S & F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified.

S & F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified.

S & F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified.

S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified.

S & F 110 mm bore PVC (SWR) reducers complete all as specified.

Supply and fix in repairs CP soap dish complete all as specified and as directed.

Supply and fix in repairs CP towel rail 600mm long complete all as specified and as directed.

S&F in repairs Over Head shower rose chromium plated complete all as specified and directed.

M&L in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Taking down steel chowkats or frames with shutter (without taking off shutters from the frame) n exc 1.50 Sqm each incl removing to store.complete all as directed.

S&F steel window with side hung shutter in proper position incl projecting type hinges with steel handle and steel peg stey complete with glazing bars dove telled or welded and finishing the disturbed surfaces complete as directed

Ditto as per item no 48 above but without glazing bars

Taking down chowkats or frames with shutter (without taking off shutters from the frame) but exc 1.50 sqm and n exc 4.0 Sqm each incl removing to store.complete all as directed.

Refixing in same opening old Shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and as directed

S & F 2nd class HW plain solid straight chowkats and frames,wrought, framed rebated on the solid rounded or chamfered put together with glue pinned joints.complete all as directed.

S & F 35 mm thick 2nd class hard wood glazed & skeleton shutters open rebated and prepared to received glass,gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Pt-I,Sec 8,Clause 8.20 complete.complete all as directed.

Taking down Chowkhats or farmesn exc. 1.00Sqm with shutters (without taking of shutters from the frames) complete all as directed.

S & F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

S & F factor made PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed.

S & F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S & F 75 mm long Mild steel butt hinges medium weight cold rolled.

S & F 100mm long aluminium handles, cast type, anodised complete all as specified and as directed.

S & F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete.complete all as directed.

S&F in repair 18/19 mm thick pre laminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame work as in shutter, shelves or cupboard including suitable beading to cover the exposed edge complete all as specified and directed.

Supply and fix butt hinges 100mm long cold rolled medium weight complete all as specified and as directed.

Supply and fix 150mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and as directed.

S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long all as specified and directed.

Supply and fix 250mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane.complete all as directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with stainless steel wire stapples.complete all as directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with stainless steel wire stapples.complete all as directed.

S&F in repair aluminium anodised tubular curtain rod 20 mm dia complete all as specified and directed.

S&F aluminium anodised Brackets for tubular curtain rod complete all as specified and directed.

Material and labour preparation of old wooden surfaces of any description n exc. 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour preparation of old steel surfaces of any description n exc. 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour preparation of newly or previously untreated wooden surfaces of any description n exc. 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

-ditto- all as per item No 73 here in before but on new steel surfaces over one coat of red oxide primer.complete all as directed.

Supply and fix in repair 40mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed.

Material and labour preparation of old decorated plastered surfaces, and applying one coat of white washing on wall surfaces complete all as specified and as directed.

All as per serial item No.76 here-in-before but on ceiling.

Material and labour preparation of old decorated plastered surfaces,washing rubbing down and stopping of distempered and painted surface and applying one coat of cement base paint complete all as specified and as directed.

Material and labour preparation of old decorated plastered surfaces,washingh rubbing down and stopping of distempered and painted surface and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for Preparation of new plastered surfaces and applying two coat of OBD over a coat of primer on wall complete all as specified.

M&L for Preparation of new plastered surfaces and applying two coat of Cement base paint over a coat primer on wall complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directd.

M&L for 20 mm thick screed bed or bedding layer of mortar for laying floor finishes in cm 1:6 complete all as specified and directed.

M&L Non skid ceramic colour tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

Ditto as item no 84 but for skirting

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1: 4) for reciving the tiles complete all as specified.

M&L (450x300)mm 4 to7 mm thick glazed ceramic colour tiles on vertical surface set in neat cement slurry and pointed in white or coloured cement complete all as specified.

S & F 75mm PVC floor trap with grating plain, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repair stainless steel grating with or without hole fixed with white cement complete all as specified and as directed.

S & F for mild steel works as in hold fast and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Material and labour for PCC(1:3:6) type C1 (using 20mm graded broken stone aggregate) for fixing hold fast complete all as specified and as directed.

S&F continious Piano type hinges, 30mm wide mild steel bright finish fixed with screws to wooden framework complete all as specified and as directed

S & F mild steel frame works such as grills, gratings etc with ends of bars shouldered and/ or reveted, or forged in to spikes, framed guard bars, framed balusters, railing and similar works conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Demolition of Cement concrete (unreinforcement) of any description and in any position not otherwise specifically provided for .

M&L Plain Cement Concrete Type B-2 1:2:4, 100 mm thick (using 40mm graded stone aggregate) as in floor including spike rolling to surfaces or making impressions of expanded metal, while the concrete is green complete all as specified and directed.

Taking down PVC low level flushing cistern and flush pipe, refixing the same after necessary tiling work complete all as specified and as directed.

Removal of shutter from existing chowkhat or frame and refixing after repair of shutter to previous existing chowkhat or frame to maintain smooth opening of doors on repaired floor complete all as specified and directed.

E/M Portion Taking down carefully copper/ aluminium point wiring (light/fan/bell/ socket or power point) complete inclusive of all fittings such as switches, ceiling roses, pendants, regulators, sockets, fittings etc. removing materials from site and making good disturbed surfaces of floors/walls/ceiling etc complete all as directed.

Taking down carefully sub main wiring of any type and size including fittings and fixtures, removing materials from site complete all as directed.

Disconnecting from electric circuit and taking out existing unserviceable SFUS, MCB DB SPN/ TPN or change over switches etc any number of ways including MCB etc removing materials from site and making good disturbed surfaces of floors/ walls/ ceiling etc complete all as directed.

Materials and labour point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core, drawn through and including PVC casing and capping not less than 20mm size complete with all fittings and accessories, fixed to walls/ ceiling, including sunk cast type pressed steel terminal boxes 1.25mm thick with 2.2 mm plastic laminated sheet (Hylem) top cover for mounting switches/ regulator etc including 1.5 Sqmm PVC insulated unsheathed multistranded (green colour) copper conductor cable 1100 volts grade, single core, earth continuity conductor connected to common earth dolly for one light point/ one fan point controlled by one one way switch complete all as specified and as directed.

All as per serial item No.101 here-in-before but for one light point controlled by two way switches.

All as per serial item No. 101 here-in-before but for one 3 pin 5 amps switch socket out let on independent board.

All as per serial item No.101 here-in-before but for one 3 pin 5 amps switch socket out let on same board.

All as per serial item No.101 here-in-before but wiring with 2.5 Sqmm including 1.5 Sqmm PVC insulated unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core earth continuity conductor connected to common earth dolly for one 3/5 pin 15 amps switch socket out let on independent board.

Supply and fix switch piano, flush button single pole one way 5 Amp complete all as specified and as directed.

Supply and fix switch piano, flush button single pole two way 5 Amp complete all as specified and as directed.

Supply and fix bell push, flush type 5 Amp complete all as specified and as directed.

Supply and fix socket out let 3 pin 5 Amps, flush type complete all as specified and as directed

Supply and fix switch socket combination 2 in 1, 3 pin 5 Amp flush type universal complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 3 pin 5 and 15 Amp flush type universal complete all as specified and as directed.

Material and labour ceiling rose, surface bakelite, 65mm x50mm three terminals complete all as specified and as directed.

Supply and fix fan regulator electronic type rotary step, 120/280 volts complete all as specified and as directed.

Supply and fix call bell multi music type complete all as specified and as directed.

Supply and fix LED batten with tube 1 x 20 Watt, 6500K, System Luminous Efficacy more than 100 lm/W with high quality aluminium extruded with decorative end caps with three year warranty including taking down old light fittings any discription capacity size including disconnection of all electric connections and removing unsv materials off the site of work and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed.

Supply & fix 10 W surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs complete all as specified and as directed.

Supply and fix lamp holder, insulated body, angular type with back plate for batten fitting including LED lamp 9 Watt complete all as specified and as directed.

S&F in repair sheet metal enclosures MCB DB 8 way SPN, double door, with 200 Amp rated bus bar including earth & neutral link, complete fixing acessoreies all as specified and directed

S&F in repair sheet metal enclosures MCB DB 4 way TPN, Vertical type , with 200 Amp rated bus bar including earth & neutral link, complete fixing acessoreies all as specified and directed

Supply and fix in repair Miniature circuit breaker (MCBs) Single Pole, 240 Volts, 10KA, 6 to 32 Amps, 'C' curve complete all as specified and directed.

Supply and fix as in repair MCB SPN 40 Amps 10KA ‘C’ series 240 volts complete all as specified and as directed.

Supply and fix in repair Miniature circuit breaker (MCBs) Triple Pole and Neutral, 415 Volts, 63KA, breaking capacity 'C' curve complete all as specified and directed.

Materials and labour two single core PVC insulated unsheathed cable 4.0 sqmm with multistranded copper conductor FRLS cable,1100 volts grade drawn through and including Rigid Steel Conduit 20 mm bore with accessories and continuous earth wire of single core PVC insulated, unsheathed cable 4.0 sqmm with multistranded copper conductor 1100 volts grade for sub main wiring including taking down old unserviceable sub main wiring of any size and making good disturbed surfaces complete all as specified and directed. Note : Two run of wiring cable, one run of earth wire and one run of rigid steel conduit shall be measured as one unit.

M & L for earthing complete with galvanized steel earth plate electrode 600mmx600mmx6mm thick buried directly in gournd (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanized 4 mm dia earth wire as earthing lead upto 7.5 mtrs from testing point fixed by means of steel bolts, nuts, check nuts and washer, of galvanized earth wire protected by 25mm bore medium grade galvanised iron pipe and other end connected to earthing test point including funnel with watering pipe of 20mm bore light grade galvanised iron, wire mesh, charcoal or coke and common salt in alternate layer of 15cm (Compacted thickness) all around earth electrode with concrete earth pit in PCC (1:3:6) type C-1 50mm thick precast RCC M-20 nominal mix cover slab of size 450mm x 450mm reinforced with 8mm dia TMT bar 10 cm C/C and suitable handle of 10mm dia round bar including necessary execavation, earth work in soft / loose soil and deposited soil to a distance n.exc 50 M and necessary testing complete all as shown in electrical plate No. 3 of MES shedule of SSR Part-I complete all as specified and as directed.

Supply and fix GI wire dia 4 mm size complete all as specified and as directed.

S&F Exhaust fan 300mm sweep 900 RPM , heavy duty , AC single phase 230/240 volts metal body with louver shutters of suitable size covers including cutting holes inround shape to accommodate exhaust fan 300 mm sweep into exhist brick wall built in CM 1:3 including finishing as per existing white wash/colour wash /cement base paint complete hole all as specified and directed.

Supply and hanging ceiling fan 1200 mm sweep with down rod ,canopy ,fan blades and accessories, BEE 3 star rating with ISI marked and connecting up including provision of PVC insulated sheathed round flexible wire with multistranded copper condictor of size 1.50 Sqmm 3 core 1100 volts aomplete all as directed.

Supply and fix as in repairs KWH meter,240 volts, SP, 5-30 Amps capacity with LCD display including all electrical connections with copper wire of suitable size complete all as as speciified and directed. Note: Old unserviceable Meter shall be deposited in AGE E/M store yard by the contractor.

M/S Luit Construction

M/S Annu Electronics