Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.5 LAccepted-AOC JABALPUR | L1 | Accepted-AOC AS PER CWC DECISION | |
| 2 | L2₹27.8 L+₹27,797 (1.01%)Rejected-AOC | L2 | Rejected-AOC AS PER CWC DECISION | |
| 3 | L3₹31.9 L+₹4.3 L (15.7%)Rejected-AOC | L3 | Rejected-AOC AS PER CWC DECISION | |
| 4 | L4₹34.2 L+₹6.7 L (24.3%)Rejected-AOC | L4 | Rejected-AOC AS PER CWC DECISION | |
| 5 | L5₹34.7 L+₹7.2 L (26.1%)Rejected-AOC DIWANBADA MANEGAON POST OFFICE KHAMARIA JABALPUR 482005 M P | JABALPUR | MADHYA PRADESH | 482005 | L5 | Rejected-AOC AS PER CWC DECISION |
Tender Value
₹35.2 L
EMD Value
₹70,425
Closing Date
3 Dec 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GENERAL MANAGER, ORDNANCE FACTORY KHAMARIA
ORDNANCE FACTORY KHAMARIA
Construction of 6 Nos. Toilet-Bath near DSC tower of Factory premises at OFK.
2022_MIL_134948_1
3220/EO/CONT/22-23/15
Open Tender
Civil Works
Item Rate
270 days
ORDNANCE FACTORY KHAMARIA
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹70,425
Yes
30 Dec 2023
10 Nov 2022
5 Dec 2022
10 Nov 2022
3 Dec 2022
10 Nov 2022
10 Nov 2022 - 3 Dec 2022
Amount
Excavation in over area n. exc. 1.5m deep in hard/dense soil and getting out. Removing excavated material n. exc. 50.0M and deposited where directed.
Excavation in over area exc. 1.5m but n exc 3.0m deep in hard/dense soil and getting out. Removing excavated material n. exc. 50.0M and deposited where directed.
Excavation in hard/ dence soil in trenches,n.exc 1.5 m wide and n.exc 1.5m in depth & getting out.Removing excavated material n. exc. 50.0M and deposited where directed.
Surface excavation in hard/ dence soil ,n.exc 30 cm deep and averaging 15 cm deep and getting out.
Boring holes 300mm dia. & 3.00m deep in soil for double under reamed piles and getting out and disposal of soil to a distance of n exc. 50m.
M & L Stone dust filling in floors or pavings, laid in layers n. exc. 15 cm thick, spread and levelled and rammed including watering.
M & L hardcore of broken stone or boulder of gauge n. exc. 63mm, deposited, spread,and levelled in layers n. exc. 15 cm thick, watered and rammed to true surface.
Providing cement concrete type C-2, 1:3:6 (40mm graded aggregate)for foundation filling and mass concrete.
S&F 10 mm dia. And over TMT bar cut to length,bent to shape required including cranking, bending etc.and binding with MS wire (annealed) n-less than 0.9mm dia.
S&F 8mm dia.TMT bar cut to length,bent to shape required including cranking, bending etc.and binding with MS wire (annealed) n-less than 0.9mm dia.
S&F 5 mm dia. and over round bars Fe-410-w (Gde.E250) quality-A or Fe-290(Gde-E-165)in stirrups, spacers and binders.
Form work to side of plinth beams, Rough finished surfaces of concrete Flat.
Form work to side of shelves, lintels, roof beams, Rough finished surfaces of concrete Flat.
Form work to chajjas including edges, Rough finished surfaces of concrete Flat.
Form work to side of Square, rectangular column, Rough finished surfaces of concrete Flat.
Form work to soffits of suspended slabs such as roof slabs, n. exceeding 200 mm, Rough finished surfaces of concrete Flat.
Form work to side of walls of Nalla, fair finished surfaces of concrete Flat.
Providing Reinforced cement conc. M-20 (20mm graded aggregate) in plinth beams and foundation.
Providing Reinforced cement conc. M-20 (20mm graded aggregate) in shelves,lintels and Roof beams.
Providing Reinforced cement conc. M-20 (20mm graded aggregate) in Columns.
Providing Reinforced cement conc. M-20 (20mm graded aggregate) in slabs supported on beams and columns.
Providing Reinforced cement conc. M-20 (20mm graded aggregate) for walls etc.
M&L Brick work with sub class B bricks straight or curved on plan exc 6 m mean radus with 1:4 cement mortor in straight.
M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls builts in 1:4 cement mortor.
M&L Brick work with sub class B bricks in one brick thick honey comb walling, built in one brick thick honey comb work with 1:4 cement mortor.
M & L Loose filling of broken bricks gauge 80 to 150mm in soakage pits.
Providing cement concrete type B-1, 1:2:4 (20mm graded aggregate) for coping.
Providing 55 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) in floors. Surfaces is to be finished even and smooth with using extra cement.
Providing 75 mm thick cement concrete type B-2, 1:2:4 (40mm graded aggregate) in floors. Surfaces is to be finished even and smooth without using extra cement.
Providing 100 mm thick cement concrete type B-2, 1:2:4 (40mm graded aggregate) in floors. Surfaces is to be finished even and smooth without using extra cement.
Rendering 15mm thick cement plastering of 1:4 cement mortar on fair faces of brick work or concrete surfaces and rendreing is to be neeru finished.
Rendering 10mm thick cement plastering of 1:4 cement mortar in ceiling, Rendreing is to be finished even and smooth without using extra cement.
Rendering 15mm thick cement plastering of 1:4 cement mortar on fair faces of brick work or concrete surfaces and rendreing is to be finished even and smooth without using extra cement.
Providing Precast cement concrete Type B-1 1:2:4 (20 mm graded aggregate) for cover slabs, and set in 1:4 cement mortar.
S & F, Glazed ceramic coloured joint free tiles in vertical surface 350x 250x 7 mm /450x 350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick cement plaster of 1:4 cement mortar.
S&F Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm Over 15 mm thick Screed bed or bedding layer of 1:4 cement mortar. in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match.
Forming square grooves in plaster n. exc. 12mm deep and n. exc. 15 mm on face.
S&F, Vitreous china wash down water closet (pedestal pattern), while including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device with PVC valveless syphonic action flusing cistern low level white with inlet ball valve, float and handle including brakets, flush pipe of polyethylene of low or high density PVC 32 mm dia.
S & F vitreous china urinals white colour, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement morter 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back incement grating and union for discharge pipe.
S & F of wash basins, vitreous China (flat back or angle back type) any size 630x450mm, including cuttin for and pinning inn ends of brackets or erecting stand but exculsive of fixing of supply and waste pipe.
S&F Solid PVC Door frame of size 50 mm x 47 mm made out 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixed in opening as per specification & drawing.
S&F factory made Solid PVC Door shutter 30 mm thick ( style) consisting of frame made out of M.S. square tube for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side etc. & fixing in the frame at site as per specification & drawing.
S&F M.S. butt hinges of 100mm size medium weight, cold rolled mild steel .
S&F Alluminium alloy handles, of 150mm size cast type anodised.
S&F Aluminium, anodised, barrel tower bolts 200mm length of extruded section .
S&F M.S. grills, barred iron doors etc. conforming to Fe 410-O or Fe 310-O.
M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement.
S&F 110 mm dia PVC (SWR) junction single, ( single T), equal or unequal with access door.
S&F 110 mm dia PVC (SWR) junction single, (single T), equal or unequal.
S&F 110 mm dia PVC (SWR) bents any radius.
S&F 110 mm dia PVC (SWR) soil, waste and vent pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.
S&F 110 mm dia PVC (SWR) soil, waste and vent pipes single socketed, in any length with rubber ring joints, fixed to walls.
S&F110 mm dia PVC (SWR) vent cowl.
S&F of 1000 ltr. Capacity rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed as per specification.
S&F 15 mm medium grade G.I. steel tubes, with all fitting and fixed complete to walls and ceiling or laid in floors.
S&F 15 mm dia stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (minimum weight 15mm-90 gms/20mm 92 gms), screwed both ends for iron pipe and fixed.
S & F 20 mm medium grade G.I. steel tubes, with all fitting and fixed complete to walls and ceiling or laid in floors.
S&F 20 mm dia stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union & fixed.
S&F 15 mm bib taps standard of PTMT any colour high pressure screwed for iron pip and fixed. (minimum weight 90 gms)
Preparation of New steel surfaces of any description over 10 cm in width/girth and applying two coat of 1st.Quality Synthetic enamel paint over red oxide priming coat.Over red oxide priming coat. Colour and make as approved by EIC.
Preparation of New wall surfaces plasterd /unplastered and applying two coats of 1st.Quality distemper oil emulsion.
Preparation of New ceiling surfaces and applying two coats of 1st.Quality distemper oil emulsion.
Preparation of New plastered surfaces and applying two coat of cement paint. Colour and make as approved by EIC.
One light point/fan piont controlled by one switch wiring will be done with 1.50 sq.mm PVC insulated sheathed single core copper conductor cable drawn in and including PVC conduit of suitable diameter with IS 9537 (part III) 1983 marking medium grade including accessories surface in wall including PVC insulated, unsheated earth wire with copper conductor of size 1.50 sq mm, pressed steel terminal boxes sunk on wall for mounting of switches , sockets, fans regulator etc. including laminated sheet cover 3 mm thick complete, Make of cable - Anchor/Bontan/HPL/Finolex /Havells/Polycab/C&S or equivalent. PVC conduit : Plaza/Crown/Modi or equivalent. (Note: Red & black colour wire will be maintained for phase & nuetral, Maximum 6 point in each circuit )
--------Ditto------ as per No.1 above but with 2.5 Sq.mm, (FRLS) PVC insulated copper condutor cable ( for socket outlet 15 amp. Independent circuit)
S&F switch piano, flush type 5A SP one way ISI Marked. Make: Anchor/SSK/Havell's/Polycab/C&S/HPL or equivalent.
S & F Switch socket combination outlet 3 pin, 5 & 15 Amp, flush type Universal. Make: Anchor/SSK/Havell's/Polycab/C&S/HPL or equivalent.
Ceiling rose, 3 terminal/PVC/polycarbonate, isolated body with M&L. Make: Anchor/SSK/Havell's/Polycab/C&S/HPL or equivalent.
S & F Lamp Holder PVC/ polycorbonate type with back plate suitable for batten fitting complete.ISI Marked. Make: Anchor/SSK/Havell's/Polycab/C&S/HPL or equivalent.
Cutting opening through brick walls built in cement mortar for 12 inch sweep exhaust fan and making good dismantled portion in cement mortar 1:3, including fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core, etc.to store and rubbish not exc. 50m. complete all as specified and directed.
Cutting holes in brick walls (not exceeding half brick) built in cement mortar including fixing holefasts and making good in cement mortar 1:3 for exhaust fan with M&L, complete all as especified and directed.
S & F of single pole and neutral DB 4 way, 240 volt IP 42 protection, metal double door, universal mounting with 200 Amps rated Bus bar, neutral bar, Earth bar and cable ties for cable management, top & bottom removable gland plates with blanking plates & all connections with copper lugs ISI Marked . DB shall consist of the following : (a) Incommer Isolator/MCB DP 40 Amps, 240 volts AC, 10 KA ISI marked confermed to IS 8828 /IEC 60898 Qty - 1 Nos. (b) Out going Isolator MCB "B" curve SP 5 to 32 Amps 240 volt AC, 10KA ISI marked confermed to IS 8828 /IEC 60898 Qty - 2 Nos. Make: Legrand/C&S/Polycab/SSK/Havell's/Anchor/Standard or equivalent.
Excavation in trenches not exceeding 0.5m wide and 0.75m depth and getting it out in hard/dense soil for laying of U/G cable.
Sand cushioning in cable trench 15 cm thick including material and labour.
S & L reinforced precast concrete cable cover class LV Type 2 flate size 300mmx180mmx40mm with M & L
Returning filling in including spreading, watering and well ramming in layers not exceeding 25cm.
S & L Tube medium grade galvanised 50 mm dia IS marked with all fittings laid in trenches for protection u/g cables Make : TATA/Jindal/Zenith/Swastic or equivalent.
S & L of 2 core XLPE insulated and armoured heavy duty cable with stranded Al conductor, 1100 voltage grade, size 10 sq mm including termination both the ends with proper lugs, glands. Make : Gloster/CCI/Havells/Finolex/poly-cab/Zenium or equivalent..
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep heavy duty with blades, and frame and louvers Make : Crompton/Havells/Alstom/GEC/Almonard/Bajaj /Khaitan or equivalent.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make: Polycab/C&S/Phillips/Havells/Anchor or equivalent.
Boring holes/ auguring not exceeding 150mm dia 1m deep for passing HT/LT under ground cable across the road/gantry.
Earthing complete (including excavation of soil) with GI plate electrode 600x600x6.0mm thick burried directly in ground (earth plate not less than 2.25m below ground level) with top edge of the plate not less than 1.5m below normal ground level and duly filled with alternate layer of char coal & salt from 150mm below the plate to 150mm above the plate (total 900mm thick) connected to GI earth strip size 25x4mm in GI protection pipe of size 40mm dia upto 7.5m long by means of nuts, bolts, washers, check nuts of GI steel, fitted with funnel complete all as per procedure and as shown in SSR electrical plate No. 3 connected to earth test point/earth bus (to be provided near incoming mains) all as specified and testing including RCC earth pit chamber duly cement plaster finished and RCC pit cover 1mX1mX150mm, PCC hard standing surrounding the earth pit chamber, location of the earth pit marked on the nearest wall to be written with paint (for distance & value of earth pit) with material and labour. Earth pit chamber will be made 0.5m above the ground level.
M/S ASHISH TRADERS
ARORA CONSTRUCTION COMPANY
SANJAY KUMAR THAKUR
C L BHATIA
SHRI KRISHNA CONSTRUCTION
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .