Providing Mosquito mesh, Safty grills & Other Misc Work at Dist. Court Building at Rajpipla, Dist. Narmada

Name of Work : Providing Mosquito mesh, Safty grills & Other Misc Work at Dist. Court Building at Rajpipla,

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

No. specifications) Quantity Unit Rate Amount

1 Scraping oil paint from steel and other metal surface and making the surface even

(with Hand Scraping.) 16019.66 Sqmt 53.01

2 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

to give an required shape even shade after thoroughly brushing the surface to 12583.66 Sqmt 122.05

remove all dirt, and remains of loose powdered materials.etc complete

3 Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and sand 3590.00 Sqmt 40.59

papered smooth.

4 Wall painting (two coats) of plastic paint with one wall highlight in special effect

(royal play) colour, shade and colour of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the 3580.00 Sqmt 128.38

surface free from mortar droppings and other foreign matter and sand papered

5 Half brick masonry in common brunt clay building bricks having crushing strength

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

super structure above plinth up to floor two level Conventional Bricks for All Floors. 46.00 Sq.M 699.93

6 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

half brick walls for interior plastering upto floor two level and finished even and 96.97 Sq.M 198.57

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) All Floors

7 Providing Water proofing Treatment on Sunk Slab including cement concrete flooring

1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid

in one layer and finished with a floating coat of neat cement average 50mm thick to 10.00 Sq.M 373.70

Prepare slope including water proofing chemical etc. Complete for Sunk Slab All

8 Distempering with dry distemper of approved brand and manufacture (two coats)

and of required shade on wall surfaces of given an even shade, over and including a

priming coat of whiting after thoroughly brooming the surface free from mortar 10.00 Sq.M 50.62

dropping and other foreign matter.

9 Providing and laying 30 X 30 cm Ceramic tiles 6mm thick in flooring treads of steps

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse 27.00 Sq.M 1017.30

sand ) finishing with flush pointing in white cement.

10 Providing and laying 30 X 30 cm Ceramic tiles 6mm thick in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with 16.00 Sq.M 1070.50

white cement slurry

11 Providing and fixing machine cut, free edges, pre mirror polished Green Marble slab

18 mm thick (single piece not less than 150 cm ) for vertical wall/Doors/Windows

Sill,Jams for cladding as per design including full moulded round inside edge and

laid on 10 mm thick cement mortar 1:3 ( 1 cement: 3 coarse sand) jointed with grey 10.00 Sq.M 1834.16

cement slurry including rubbing and polishing finishing etc. complete.

12 Providing and fixing FRP Door frame size 100 x 50mm and 28 mm thick FRP Depress

puf panels Single shutter having extra reinforcement on sides and edges in gel coat

finish the core of shutter and frame is to be filled up with injected fire retardant

grade polyurethane foam done in situ along with embedded wooden pieces for

stiffening and also taking hinges and fixtures the whole FRP Frame and shutter is to 2.00 Sq.M 2377.76

be water proof, whether proof, termite proof and resistance to mild acid / alkali

Rates are to be inclusive of SS hinges with necessary screw and aluminium fixtures

and fastening and fastener sleeve and directed by engineer in change with detailed

13 Providing, laying and jointing in true line and level 110 diameter U.P.V.C SWR (Type

B) Pipe conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm 20.00 Rmt 897.79

length x 145 mm height at every 2000 mm centre to centre or shall be concealed in

walls as directed including necessary fittings such as bends, "Y" "T" shoes etc.

including testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

14 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B Pipe

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fitting conforming to IS 14735-1999 of approved make for drainage system

pipeline, pipe shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using PVC Clamp of the size 160mm dia x 210 mm length x 196 mm high 20.00 Rmt 834.38

at every 2000 mm centre to centre or shall be concealed in walls as directed including

necessary fittings such as bends, shoes, tees, etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials (i) 160 mm

15 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall 30.00 Rmt 195.67

be concealed as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

16 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc. including testing of pipe and 15.00 Rmt. 148.12

joints and fixing the same with adhesive solvent, including cost of all materials. 40mm

17 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc. including testing of pipe and 15.00 Rmt. 91.84

joints and fixing the same with adhesive solvent, including cost of all materials. 25mm

18 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of following

dia. Nominal bore tube fitting and clamps including making good the wall, ceiling, and 5.00 Rmt. 253.82

floor, etc. complete 25 mm dia

19 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of following

dia. Nominal bore tube fitting and clamps including making good the wall, ceiling, and 4.00 Rmt. 170.36

floor, etc. complete 15 mm dia

20 Providing and fixing Gun metal check or non-return full way wheel valve.(D) 50mm

21 Providing and fixing wash down water closet (European W.C. Pan) with integral P or S

trap and PVC dual flush tank with complete fittings including cutting holes in walls

and making good the same connecting the flush bend with cistern and closet etc. 2.00 No 3227.96

complete including plastic seat cover, water jet and including jointing trap with

Waste pipe overall size as per the selection of the Model by E.I.C. or as approved}

22 Providing and fixing urinal of approved quality including connecting urinal with waste

pipe ,tap etc. complete (A) white earthen ware flat back type size 430 mm x 260 mm

x 350 mm including 32mm dia C.P. brass waste Coupling with PVC Waste pipe and 3.00 No 1142.77

PTMT Spreader with 15mm dia flexible pipe.

23 Providing & fixing of first quality (ii) Flat Back washbasin 550 mm x 400mm size. (i) In

white colour. including with approved sanitary grade material with C.P waste

coupling, waste pipe, 15mm dia Pillar & Stop Cock of approved brand with

connection 15mm dia flexiable pvc pipe etc. complete

24 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated

screws down Bib Tap. (i) 15mm dia. 2.00 No 186.83

25 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with

jali of the following nominal diameter of self cleansing design with C.I scread down or 2.00 No 600.23

hinged grating including the cost of cutting and making good the walls.

26 Providing and fixing S.W. Gully trap with C I grating brick masonry chamber and water

tight C I cover with frame of 300 x 300 mm size (inside) with standard weight 2.00 No 1246.92

(i)square mouth traps (C) 150 mm x 100 mm size P or R type

27 Providing and fixing Jet spray to connect wall mount w.c with 1.5 mtr long plc. heavy

duty supply pipe with two side male female checknut etc. complete. 2.00 No 308.99

28 Providing and fixing 600mm x 450mm Bevelled edge glass mirror of superior glass

mounted on 6mm the A.C. sheet or plywood sheet & fixed to wooden plugs with C.P. 2.00 No 859.41

brass screws and washers.

29 Excavation for foundation up to 1.50 MT depth including sorting out and stacking of

useful materials and disposing the excavated stuff up to 50 mt lead (A) Loose & soft 26.00 Cmt 117.08

30 Providing & laying controlled cement concrete M150 for curing comp. including cost

of form work and excluding cost of reinforcement for reinforced conrete work in 5.00 Cmt 3671.79

foundation and plinth

31 Provinding and Laying controlled cement concrete M-250 including finising smooth

with curing complete including the cost of form workbut excluding the cost of 4.00 Cmt 4644.99

reinforced concrete work in foundation FOOTING and mass cocrete.

32 Providing and laying controlled cement concrete M 250 using B.T. stone aggregate

and curing complete including the cost of form work but excluding the cost of 2.00 Cmt 7532.58

reinforcement for reinforced concrete work in. Columns up to plinth Level

33 Provinding and Laying controlled cement concrete M-250 & including finising smooth

with curing complete including the cost of form work but excluding cost of 3.00 Cmt 5276.24

reinforcement concrete for RCC PLINTH BEAM for any cross sectional area of beam.

34 Provinding and Laying controlled cement concrete M-200 and with curing

etc.complete. Including the cost of formwork but excluding the cost of reinforcement

for R.C.C work in Column heving any cross section area of Column.For Ground Floor 2.00 Cmt 8419.36

35 Brickwork using common burnt clay building bricks having crushing strength not less

than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 - 12.00 Cmt 4772.86

fine sand) (C) Fly Ash

36 Providing and casting in situ ordinary cement concrete M- 150 for coping, over riding

returns including formwork curing and finishing complete. 1.00 Cmt 3598.34

37 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding

and placing in position complete upto floor two level 1164.00 Kg 76.21

38 Providing 20 mm thick sand faced cement plaster on walls for all height above ground

level consisting of 12mm thick backing coat of cement mortar 1:3 (1 cement : 3 sand)

and 8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including making 144.00 Sqm 329.29

necessary cornices as directed etc. complete.

39 Providing & fixing M.S. grills of required pattern in gaps of openings including frame

work etc. with one coat of red lead paint & two coats of oil paint etc. complete. 700.00 Kg 108.75

40 Providing and fixing concertina coil fencing with punched tape concertina coil

mm dia 10 mt openable length having 50 no rounds per 6 mt length, upto 3mt height

of wall with existing angle iron (50mm x50mm x5mm )requird shaped As per Directed

Engeenier in charge. placed 2.4mt or 3.00mt apart and with 4 horizontal R.B.T.

reinforced barbed wire(3 mm) , stud tied with G.I. staples and G.I. clips to retain 30.00 Rmt 342.39

horizontal, including necessary bolts or G.I.barbed wire tied to angle iron, all

complete as per direction of Engineer-in-charge, with reinforced barbed tape

(R.B.T.)/Spring core (2.5 mm thick) and weight 43.478 gm/meter at compound wall

for ESR M4/ intakewell.

41 Providing and fixing Mosquito mesh with Jindal Deluxe series or eqivalent extruded

aluminum Colour anodized section frame main outer size 61.85 x 31.75 x 1.20 mm &

Sliding shutters of member size 25.00 x 25.00 x 1.10 mm of with Plated 120 GSM

Highly Durable Fibreglass Mosquito mesh for fix with Colour Anodized aluminum 21.00 Sq.Mt 1571.12

Section,Glazing clip, Fittings, Fixtures,Rubber Gasket per drawing and instruction of

Engineer - in - charge etc. complete

42 Providinfg and fixing Safty grills of required pattern for windows/ Door using

necessary M.S angle/ M.S pipe, M.S flats and other structural steel at required

spacing including cutting, welding and fabriction etc. including one coat of primer of 684.00 KG 116.91

approved quality and two coats of oil painting as per detail drawing etc complete.

43 Providing and fixing window having extruded aluminum Colour Powder Coated

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt,

horizontal Three track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt,

vertical member of size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with sliding

shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, 12.00 Sq.Mt 1591.87

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt with 5 mm

thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per details

44 Providing & Fixing 10mm Thick glass with Graging, Cutting & Finishing incl good

quality table cloth etc complete as directed by Engineer in charge. 5.00 Sq.Mt 852.44

45 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block

60mm thick with grade of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 900.00 Sq.Mt 705.95

mm Sand layer for levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete

46 Providing Different Type & Size of Flower Pots with Fertilizer end Termites

Treatments of Having Size 1ft. to 2ft. 210.00 Sq.Mt 252.50

47 Providing Good Quality Artificial Lawn With proper fixing to the floor and make good

as per instruction given by engineer incharge. 2750.00 Sq.Mt 202.00

In Word : Forty-Nine Lakh Thirty-Three Thousand Three Hundred Twelve Rupees and Fifty-One Paise Only.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned

above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 The amount of dismentalled credit materials at Rs. 0 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and to be approved From the

Engineer In Charge.

Deputy Executive Engineer Executive Engineer

Const. (R&B) Sub-Division Rajpipla (R&B) Division

Rajpipla Rajpipla