Construction of parking, pathway, Fish Pond, installation of Fountain behind auditorium block A-08 and Construction of one row open car parking and pathway between faculty housing C-34 and C-26 at North Campus of IIT Mandi HP

Amount

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth in all lead and lift, as directed by Engineer-in- Charge: All kinds of soil as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth in all lead and lift, as directed by Engineer-in-charge. All kinds of soil as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift, including getting out and disposal of excavated earth in all lead and lift as directed. All kinds of soil as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Centering and shuttering including strutting, propping etc. and removal of form for, Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Coursed rubble masonry (second sort) with hard stone in foundation & plinth with: Cement mortar 1:6 (1 cement: 6 coarse sand) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with: Cement mortar 1:6 (1 cement: 6 coarse sand) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand): Raised and cut pointing as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

P/F 110 mm dia. Unplasticized rigid PVC pipe of required size for weep holes in plum/masonry walls including cutting, placing and fixing in required slope all complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per entire satisfaction and direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Add for using extra cement in the items of design mix over and above the specified cement content therein as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation Ring 10feet dia SS fabrication make reliable decor water pattern using multiple clear stream nozzles mounted on a single ring. The direction adjustment of the nozzles can create various effects such as inward crown, outward crown, vertical crown, inward Weave or outward weave. To be installed in a way that the ring is either embedded in the civil structure or is below the water and individual nozzle are visible above the water. Make reliable décor, premier as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation of Straight jet nozzles Description - Smooth bore single clear stream jet with adjustable direction. Normally used in groups to form a circle or straight line of jets. Sizes - Available from 12mm to 50mm inlet sizes with a variety of bore sizes. Custom - Custom inlets, or threads are possible. Type - Water level independent (no change in water effect with varying water level) brass chrome plated make reliable décor, make premier as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation of Foam jet nozzle 1” 5pc as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation of Valve 1'' as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation SS ring stands heavy gauge make reliable décor as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation of 3sut gate valve make aviko as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation of Submersible pump open well 5hp make kirlosekar, Crompton as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation Underwater light (DMX controlled) (warm white)/RGB IP 68 18valt DC shockproof make by reliable décor Epoxy encapsulated compression type cable entry glands for complete water protection. Noryl body for 100% corrosion free life even in seawater applications. Make reliable décor, make premium Low Voltage for safety and shockproof. Make reliable décor, premier as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation SS Screen good filter 2” Make reliable décor, make premier as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation SMPS Light programmer 5valt 5amp make reliable décor as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation of Control panel operating for each pump 5hp Electrical panel cubical type wall / floor mounted the panel shall be fabricated out of 2.0 mm thick CRCA MS sheet, duly stove enameled with synthetic paint of approved shade over a coat of red oxide primer. (All accessories are of reputed make) i./c MCBs, main switches change overs etc. as per requirements. Contractor, rely, Make reliable décor, make premier as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation of Plumbing 2”,1” pipe UPVC union elbow with fitting charges Necessary plumbing work such as U pvc pipes (finolex/prince/supreme) &suitable for the respective, working pressure with all fitting coupling ,tee ,bends ,Reducers ,bushes ,male & female threads ,screwed Adopter etc. joining with solvent chemicals as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Supply and installation of electric fitting wiring to connecting starter & light wiring as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.

Chopra Aluminium

Nipani Infra And Industries Pvt Ltd