SPECIAL REPAIRS TO ROOF, FLOOR, FALSE CEILING AND INTERNAL ELECTRIC WIRING IN BLDG NO E-04 (OR LIVING LINE) AT ARMY AREA AT KANNUR UNDER AGE(I) CANNANORE

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling battens spaced exceeding 15 cm for tiles, shingles etc of any size including tilting fillets complete all as specified and directed.

Dismantling of timber scantlings 40 sqcm and over in section in any position, unframed work complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards, slabs, blankets, any thickness, including cover fillets complete all as specified and as directed.

Demolition of Stone slabs & tiles of any description or thickness laid, bedded & pointed in any mortar as in floors, aprons etc. complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floor and pavings not exceeding 15 cm thickness (below or above GL) complete all as specified and as directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 2nd class hardwood scantlings, clean sawn, framed and fitted as in rafters, purlins etc; complete all as specified and as directed.

All as in item No. 9 here-in-before but except timber

S&F Rolled mild structural steel works as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings, heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. confirming to Gde Fe 410-W (Gde-E-250) quality-A, complete all as specified and as directed.

S&F Mild steel rectangular/ tubular trusses using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 as in purlins etc including special shaped washers complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa as in roofing, fixed with self tapping screws complete all as specified and as directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.

All as same as per item 15 here-in-before but one coat over old wooden surfaces complete all as specified and as directed.

M&L Preparing new steel and iron surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L GI framework for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre suspended with hangers 6 mm dia (up to 1200 mm length) GI wire of suitable length adjusting level fixed to roof by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long complete all as specified and directed

M&L 4 mm thick non asbestos fiber cement building boards, fixed or laid/inserted to timber/GI/Aluminium frame work with screws, fixed in ceiling flat or sloping complete all as specified and as directed.

M&L Preparation of new plastered or unplastered ceiling surface and applying two coats of distemper oil emulsion over a coat of primer over a coat of 3 mm thick putty complete all as specified and as directed.

Excavation in trenches not exceeding 1.50 m deep and not exceeding 1.50 m wide or 10 Sqm in plan and getting out in hard/dense soil complete all as specified and as directed.

M&L PCC 1:4:8, type D2, using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

Removal excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L 75 mm thick, PCC 1:4:8, type D2 using 40mm graded stone aggregate for sub base in flooring complete all as specified and as directed.

Demolition of brick work or concrete/ stone masonry wall built in cement mortar or cement lime mortar complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings etc including raking out jointing, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Pre-cast cement concrete block masonry using cement concrete 1:3:6, type C1, using 20mm graded aggregate with solid block exceeding 10cm in width and setting in cement mortar 1:6. complete all as specified and as directed.

M&L Pre-cast cement concrete block masonry using cement concrete 1:2:4, type B1, using 20mm graded stone aggregate, 100mm thick, set in CM 1:4 complete all as specified and as directed.

M&L Rendering in CM 1:6, 10 mm thick on stone masonry surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering in CM 1:4, 15 mm thick on stone masonry surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L 25mm thick, cement concrete 1:2:4, type B0, using 12.5mm graded aggregate as in flooring complete all as specified and as directed.

M&L Coloured non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Coloured Non skid ceramic tiles 10 mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured tiles in vertical surfaces 350x250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L 20mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L 10mm thick cement plaster on concrete surfaces of wall as backing coat in CM 1:4 complete all as specified and as directed.

M&L Granite (of any type) tiles, 20mm thick, machine cut, polished, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick, screed in CM 1:4, complete all as specified and as directed.

Taking down chowkats or frames and not exceeding 1.5 Sqm each with shutters (without taking of shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking of shutters from the frame) complete all as specified and as directed.

Cutting holes in brick work built in cement mortar or cement lime mortar , exceeding one brick but n exceeding two bricks for inserting hold fast and making good dismantled portion in CM 1:3 complete all as specified and as directed.

M&L 2nd class hard wood, plain solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M&L 2nd class hard wood plain framed, panelled shutter, 40mm thick (three panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and as directed.

M&L 2nd class hard wood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauge (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. complete all as specified and as directed.

S&F Hold fast with FI 20 x3mm and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L Cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in hold fast block including necessary form work etc complete all as specified and as directed.

S&F Powder coated aluminium frame for doors, partition walls, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and as directed.

S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21,100mm long (2 Nos.) suitable handle (1 No.) (minimum thickness of powder coating 50 micron) complete all as specified and as directed.

M&L 4 mm thick plain sheet glass ordinary quality/ ground or obscured or frosted on one side & glazing with aluminium glazing clips and rubber neoprene beading complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed.

S&F powder coated anodized aluminium 6 mm thick deco grill 50mm x 50 mm mesh (weight not less than 2.54 kg/sqm) fixed to window frame including necessary fixing clips complete all as specified and as directed.

M&L solid PVC door frame of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and as directed.

S&F factory made solid PVC door shutter, 30mm thick (style), consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain coloured PVC “C” channel having a PVC sheet strip of 20mm width stock inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour of PVC sheet fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement etc. Details complete all as specified and as directed and drawings.

S&F 150 mm aluminum anodized barrel tower bolts of extruded section complete all as specified and as directed.

All as in item No.54 her-in-before but 100 mm size complete all as specified and as directed.

S&F 300mm long aluminum alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section or cast aluminum alloy; complete all as specified and as directed.

S&F Butt hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150mm size extruded aluminum alloy handle fabricated type anodized complete all as specified and as directed.

All as in item No.58 her-in-before but 100mm size complete all as specified and as directed.

M&L Preparing new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed.

M&L Preparing old wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F Harrison rails, anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

Taking down 15mm bore GI tubing and connections and removing to store of pipe complete all as specified and as directed.

Taking down 20mm bore GI tubing and connection and removing to store of pipe complete all as specified and as directed.

Taking down 25mm bore GI tubing and connection and removing to store of pipe complete all as specified and as directed.

Dismantling of drain pipe 75/100mm dia set in cement mortar complete all as specified and as directed.

S&F 110 mm bore, PVC SWR pipe, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

All as in item No.67 here-in-before but laid in trenches or on floors complete all as specified and as directed.

S&F 75mm bore, PVC SWR pipes single socketed in any length with rubber ring joints, fixed on walls complete all as specified and as directed.

S&F 75mm bore, PVC SWR pipes single socketed in any length with rubber ring joints, on floors complete all as specified and as directed.

S&F 75mm bore, PVC SWR vent cowl complete all as specified and as directed.

S&F 75mm bore, PVC SWR bends any radius with access door complete all as specified and as directed.

All as per item no. 72 here-in-before, but 110mm bore, with access door complete all as specified and as directed.

S&F 110 mm bore, PVC SWR branch piece, single Y, equal or unequal complete all as specified and as directed.

S&F 75mm bore, PVC SWR branch piece, single Y, equal or unequal complete all as specified and as directed.

S&F 125/110mm bore, PVC (SWR) Gully trap with grating, setting and jointing with solvent cement as in repairs complete all as specified and as directed.

S&F 75mm bore, PVC SWR floor trap plain with grating including jointing with solvent cement as in repairs complete all as specified and as directed.

M&L 15mm bore UPVC pipe of pressure rating 10Kg f/cm² fixed on walls ceilings or on floor complete all as specified and as directed.

All as per item No. 78 here-in-before, but 20 mm bore complete all as specified and as directed.

All as per item No. 78 here-in-before, but 25 mm bore complete all as specified and as directed.

Cutting chases, planning in, making good to faces where required and pointing for cement mortar for concealed water tubing and making good, cutting not exceeding 10cm girth in brick walls complete all as specified and as directed.

S&F Vitreous china wash basin, white, flat back, of size 630x450mm including suitable brackets complete all as specified and as directed.

S&F in repair 15mm Pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered hot or cold, with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and as directed.

S&F 32mm dia waste fittings, brass chromium plated, for sinks, WHB etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed.

S&F PVC connections, 15mm size, 600mm long with PTMT nuts complete all as specified and as directed.

S&F in repair Bib tap, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule of 15mm bore complete all as specified and as directed.

S&F in repair Stop cocks, chromium plated, cast copper alloy with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and as directed.

S&F in repairs angler cocks, chromium plated, cast copper alloy with long shank and cup, high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and as directed.

S&F in repairs 125 mm chromium plated, shower rose with swivel joints, including fixing to pipe or union complete all as specified and as directed.

S&F in repairs tubular towel rail, 20mm dia, D type, 600mm long between flanges, brass chromium plated complete all as specified and as directed.

M&L 75mm thick cement concrete 1:3:6, type C1, using 20mm graded stone aggregate finished even and fair as in plinth protection complete all as specified and as directed.

M&L cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in surface channels and drains complete all as specified and as directed.

M&L complete removal of existing treatment on surfaces of wall by scrapping down old treatment, applying 3 mm thick wall care putty and two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed

M&L preparation of newly plastered surfaces of walls and applying 3 mm thick wall care putty and two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed.

M&L complete removal of existing treatment on external walls by scrapping down old treatment and applying 3 mm thick wall care putty and two coats of exterior grade anti-algae acrylic emulsion paint over one coat of wall primer paint complete all as directed as per manufacturers instructions.

M&L preparation of newly plastered surfaces of external walls and applying 3 mm thick wall care putty and two coats of exterior grade anti-algae acrylic emulsion paint over one coat of wall primer paint complete all as directed as per manufacturers instructions.

M&L Cutting into existing manholes for connecting new drains 100mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required complete all as specified and as directed.

M&L precast cement concrete 1:3:6, type C1 using 20 mm graded stone aggregate and set in Cement Mortar 1:4 as in landings, cover slabs (for manholes etc.) chullaha, hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring of light, fan, socket or power complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floor ceiling etc. complete all as specified and as directed.

M&L point wiring complete with 1.5 Sq mm single core PVC insulated unsheathed copper conductor FRLS cable multi stranded 1100 Volt grade drawn through and including non metallic rigid PVC conduit concealed to wall fixed to ceiling/roof etc with necessary fixing accessories such as bend, elbow, socket, etc with fixing material including terminal box made out of 1.22mm thick MS Sheet concealed in wall covered with laminated sheet top cover of 3 mm thick chromium plated screws with cup washer for housing switches, switch socket out let, regulator etc including 1.5 Sqmm single core PVC insulated un sheathed copper conductor FRLS cable multi stranded 1100Volt grade as earth continuity conductor green in colour connected to common earth dolly complete all as specified and as directed for One light/fan/bell point controlled by one switch. Note : Cutting chases for fixing conduit shall be measured and paid separately.

All as per item No 103 here-in-before but for One 3 Pin, 5 Amps socket on same board with other switches complete all as specified and as directed.10

All as per item No 103 here-in-before but for One 3 Pin, 5 Amps switch socket combination on independent board complete all as specified and as directed.

All as per item No. 103 on here-in-before but for One 3 pin, 15 amp switch socket combination on independent board with 4 Sqmm unsheathed PVC insulated copper conductor FRLS cable including 4 Sqmm PVC insulated copper cable for earth continuity conductor complete all as specified and as directed.

Cutting chases on wall of width 30 mm dia for concealing PVC conduit 20/25mm dia and making good the surface with plastering in cement mortar 1:4 and finish to match the existing surface and treated with existing treatment such as white wash/OBD/cement base paint etc complete all as specified and as directed.

All as per item No 107 here-in-before but 50mm dia complete all as specified and as directed.

All as per item No 107 here-in-before but 75mm dia complete all as specified and as directed.

S&F switch piano flush type, single pole, one way, 5 Amps, 240 volt including connecting up electrically complete all as specified and as directed.

S&F PVC ceiling rose round shape, three terminals, polycarbonate, isolated body including connecting up electrically complete all as specified and as directed.

S&F Switch socket combination, 2 in 1, 5 pin, 5/6 Amps, multipurpose, flush type, non-inter locking type, including connecting up electrically complete all as specified and directed.

S&F switch socket combination, 2 in 1, 5 & 16 Amps, multipurpose, flush type, non-inter locking type, including connecting up electrically complete all as specified and directed.

S&F socket 5 pin 5/6 Amps, multipurpose, flush type, non-inter locking type, including connecting up electrically complete all as specified and directed.

M&L Taking down carefully ceiling fan with rod from ceiling / roof complete after disconnecting electrically, painting of ceiling fan with white colour synthetic enamel paint and writing MES number in black paint and refixing after complete of civil works complete all as specified and directed.

M&L Clamps made out of flat iron (duly painted with two coats of synthetic enamel paint over a coat of red oxide primer) made of 40mmx4mm duly bolted with double nuts and washers on existing wooden beams of approximate size 300x200mm with and inclusive of fan down rod of 0.5mtr to 1.5 mtr length duly fitted on MS clamps with bolts, nuts with safety pin and twin core twisted multi stranded copper flexible wire of size 23/0.0076 from ceiling rose to fan complete all as specified and directed.

S&F sheet metal enclosure factory made for MCB DB, SPN 12 way with 200 Amps bus bar, 240 Volt, double door type, fixed/flushed on wall including electrically connecting up complete all as specified and directed.

S&F MCB SPN, 240 Volt, 40 Amps including electrically connecting up using wiring lugs complete all as specified and as directed.

S&F MCB SP, 240 Volt, 6 to 32Amps including electrically connecting up using wiring lugs complete all as specified and as directed.

S&F decorative ultra slim linear LED light fittings with extruded Aluminium, heat sink, environmental friendly, energy efficient ready to use pack of 20W LED 6000K electrically connecting up complete all as specified and as directed. Make:- Model LHEXBYPNIN1W020 of Havells or other makes given in list of manufacturers

M&L Earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron connected to earthing test point, main DB, panel board, continuous earth lead protected by 15mm bore GI pipe light grade, 20mm bore GI light grade pipe for watering, necessary excavation and earth work in any type of soil, PCC pit, RCC chamber cover with suitable reinforcement complete all as shown on electrical plate No 3 of SSR part-I of 2009 complete all as specified and as directed. Note :- Rate quoted shall deem to include for GI earth and GI pipe lead up to 7.5m length.

S&F in replacement stepped type electronic fan regulator, full rotation, 200W, SP, 230V connecting up electrically all complete all as specified and as directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in replacement LED Ball type Lamp 10 watt complete all as specified and as directed.

K C ASSOCIATES

T.P.SUNIL KUMAR

JEETH CONSTRUCTION