FURNITURE AND FURNISHING WORK FOR 500 BEDDED HOSPITAL AT DOON MEDICAL COLLEGE, DEHRADUN

Enterprise Entpr 1500 with CPU hanger Providing & placing in position office table with with CPU Hanger with overall size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) .

Motion High Back Larger Seat - Adjustable Armrests Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/W/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm . PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors . TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. Overall Dimensions of Chair Seat Height - min 44.5 to max 53.8 cm. Height - min 99.5 to max 108.8 cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm.

Bliss -3 Str Metal Perforated Without Arm Providing, supplying and placing of public seating. SEAT/BACK FRAME ASSEMBLY: The seat and back should be made of 0.1 ±0.012 cm thick CR steel perforated sheets which should be welded to a seat/back frame assembly made of 0 1.9 ±0.02cm x 0.16 ±0.0128 cm thk MS ERW tube. Connecting Strips made of 0.5cm thick HR steel should be welded to the structure. The mounting base subassembly made up of 0 1.9 ±0.02cm x 0.16 ±0.0128 cm thk & C-channel made of, 0.315±0.022cm HR steel welded to connecting strip for assembly with the connecting beam. SEAT. SIZE: 39.2cm. (W) x 41.5cm.(D) (Approx.) BACK SIZE:39.5cm. (W) x 21.5cm.(H) (Approx.) CONNECTING BEAM ASSEMBLY: It should be made up of 5.0 ±0.03 cm x 5.0 ±0.03 cm x 0.16 ±0.0128 cm thk. M.S.E.R.W Squshould be tube. The connecting beam should be powder coated ( DFT 40-60 microns ). The ends of the Beam should be closed with L-shaped plastic end cap made from PP material. The connecting beam assembly should be powder coated (DFT 40-60 microns). LEG ASSEMBLY: It should be made up of 5.0 ±0.03 cm x 5.0 ±0.03 cm x0.16 ±0.0128 cm thk. M.S.E.R.W Squ should be tube. and 0 3.175 ±0.03 cm x 0.2 ±0.016 cm thk M.S.E.R.W tube welded together to C-channel made of 0.2 ±0.018 cm thk CR steel. Plastic End caps should be fitted to Legs. The leg assembly should be powder coated ( DFT 40-60 microns). Overall Dimensions of Chair Seat Height - 44.5 cm. Height - 77.5 cm. Width & Depth of Chair as - Width-160.0cm and Depth-57.5 cm.

Enterprise Table Size 1200 W x 600 D x 728 H Providing & placing in position office table with overall size shall be 1200 Width mm x 600 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . GreenGuard, IAQ Gold & GRIHA

Motion High Back - ZOOM High Back Chair (Grey Colour) (FG000907) Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/W/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm . PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors . TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. Overall Dimensions of Chair Seat Height - min 44.5 to max 53.8 cm. Height - min 99.5 to max 108.8 cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. BIFMA Level 2 IAQ Gold GreenPro GRIHA

Glass Door with 4 Shelves Providing, supplying and placing of Glass door storage unit. Overall size Shall be 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It shall have a brass handle and a 2 way locking mechanism with shooting bolt . It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.

Motion High Back - ZOOM High Back Chair (Grey Colour) (FG000907) Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/W/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The "S" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm . PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors . TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. Overall Dimensions of Chair Seat Height - min 44.5 to max 53.8 cm. Height - min 99.5 to max 108.8 cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. BIFMA Level 2 IAQ Gold GreenPro GRIHA

Enterprise Table Providing & placing in position office table with with CPU Hanger with overall size shall be 1650 Width x 9000 Depth x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) .

Storwel with 4 Shelves - STEEL ALMIRAH Providing, supplying and placing of storage unit. Overall size shall be 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.

Ayush Lite Attendent Bed without Castors with Fixed Head Board/Foot Board in MS. Supply, assembly and placement of ATTENDANT BED . Overall dimension should be: (L) 2025mm x (W)760mm x (H) 550mm. Head board and foot board have curved profile at the top made of MS ERW round tubes of thickness 1.2mm & dia 31.75 mm. Head board and leg board is further strengthened by 3 vertical pipes each of thickness 1.2 mm and dia of 19mm & 1 each Horizontal pipe of thickness 1.2mm and dia of 25.4mm of equal height. Lying surface is made of 8 bend panel of CRCA sheet of thickness 0.80mm mm. This 8 bend panel is further strengthened on the longitudinally edges by welding full length with the help of C shaped metal channel section. Middle of 8 bend panel is strengthened by 5 L shaped stiffeners. lying surface is strengthened by trapezoidal contour (rounded corner) 10 nos, embossed cut out. All metal components is pre treated with zinc phosphating and then powder coated with epoxy polyester powder coating. Goods are supplied in knocked down construction to reduce carbon emission. To ensure quid quality welding " Co2 Argon" process is adhered to. Neoprene rubber with reinforced metal washer is used for leg shoes. Head board and leg board are connected to mattress platform thru L bracket at 4 corners to ensure rigidity, with the help of zinc plated screws. Maximum safe working load is 135 kg.