Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAdmitted-Fee/PreQual/Technical/Finance | L1 | Admitted-Fee/PreQual/Technical/Finance | |
| 2 | L2₹1.9 L+₹748.36 (0.40%)Admitted-Fee/PreQual/Technical/Finance | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | Sidique P.B. L1 | SANDEEP K S L2 |
|---|---|---|---|---|---|
| 1.00Detailed estimate | |||||
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 64.3 | kg | 584.71 ₹37,596.85 Lowest | 587.06 ₹37,747.96 |
| 1.00 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 64.3 | kg | 708.23 ₹45,539.19 Lowest | 711.07 ₹45,721.8 |
| 1.00 | OD130714/2026-2027:Providing and fixing hylam board 2mm thick in panelling fixed in Aluminium doors windows
shutters and partition frames with CP brass or stainless steel screw etc complete as per
architectural drawings and directions of the engineer in charge | 29.47 | sqm | 932.26 ₹27,469.97 Lowest | 936 ₹27,580.18 |
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.82 | cum | 359.72 ₹653.97 Lowest | 361.16 ₹656.59 |
| 1.00 | OD98667/2026-2027:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site | 1.82 | cum | 3,993.42 ₹7,260.04 Lowest | 4,009.43 ₹7,289.14 |
| 1.01 | OD98664/2026-2027:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand) without Through and bond stone | 0.99 | cum | 7,704.41 ₹7,658.18 Lowest | 7,735.31 ₹7,688.9 |
| 1.01 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 1.01 | cum | 6,831.07 ₹6,933.54 Lowest | 6,858.46 ₹6,961.34 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 29.73 | sqm | 369.76 ₹10,991.12 Lowest | 371.24 ₹11,035.11 |
| 1.01 | OD152401/2026-2027:Engaging labour for miscellanious work | 3 | each | 1,082.17 ₹3,246.51 Lowest | 1,086.51 ₹3,259.53 |
Tender Value
₹1.9 L
EMD Value
₹4,667
Closing Date
18 Sept 2026, 12:00 pmClosed
Asha K S,AE ,LIDEW Section ,Edathiruthy GP
Asha K S,AE ,LIDEW Section ,Edathiruthy GP
Annual Plan-Edathiruthy GP - 2026-27. Rennovation of Chamakkala PHC-SO 289/27-General Civil Work
2026_LSGD_868730_2
TN03/AE/LIDEW/EDTY/2026-27
Open Tender
Civil Works - Buildings
Item Rate
180 days
Edathiruthy GP
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹4,667
Yes
22 Sept 2026
10 Sept 2026
19 Sept 2026
10 Sept 2026
18 Sept 2026
10 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Detailed estimate | |||||
| 1.001 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 64.3 | kg | - | - |
| 1.002 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 64.3 | kg | - | - |
| 1.003 | OD130714/2026-2027:Providing and fixing hylam board 2mm thick in panelling fixed in Aluminium doors windows
shutters and partition frames with CP brass or stainless steel screw etc complete as per
architectural drawings and directions of the engineer in charge | 29.47 | sqm | - | - |
| 1.004 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.82 | cum | - | - |
| 1.005 | OD98667/2026-2027:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site | 1.82 | cum | - | - |
| 1.006 | OD98664/2026-2027:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand) without Through and bond stone | 0.99 | cum | - | - |
| 1.007 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 1.02 | cum | - | - |
| 1.008 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 29.73 | sqm | - | - |
| 1.009 | OD152401/2026-2027:Engaging labour for miscellanious work | 3 | each | - | - |
stage.html
html • 0.02 MB
finance_1471456.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.24 MB
BOQ_1471456.xls
BOQ • 0.31 MB
merged.pdf
Tender Documents • 2.47 MB
corrigendum.pdf
PDF • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .