Construction of Infrastructure and Developmental Work at Krushak Bazar under RMC, Kendupatna

Construction of Toilet Block with Water Supply Arrangement, Cow Catcher (2 Nos.) and Drinking Water System at Krushak Bazar under RMC, Kendupatna Earth work in excavation of foundation trenches in hard soil soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders required depth and depositing the excavated materials away from the work site with all leads and lifts including shoring shuttering & dewatering (if required) with cost of labour hire & running charges of water pumps sundries & T & P required for the work complete as directed by the Engineer in charge.

Supplying and filling plinth with sand well watered and rammed in layers not exceeding 23 cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalities and taxes of all materials cost of all labour sundries T&P required for the work etc complete in all respect as directed by the engineer in charge. (Measurement will be taken on finished compacted section only.)

Filling foundation trenches and plinth with excavated earth including watering ramming and compacting in layers not exceeding 150mm thick including labour sundries T&P etc complete and as per direction of engineer -in- charge.

Providing and laying PCC (1:3:6) in foundation & plinth using 40mm size crusher broken HG metal of approved quality from approved quarry including hoisting, Lowering and laying concrete to the required level ramming, watering & curing etc complete including cost conveyance of all materials with all taxes and royalties all labour with sundries T&P including hire and running charges of machineries required for the work etc complete in all respect and as per the direction of Engineer-in-charge.

C.C (1:2:4)with 12mm size HG chips of approved quality from approved quarry including hoisting. Lowering and laying concrete to the required level ramming, watering & curing etc complete including cost conveyance of all materials with all taxes and royalties all labour with sundries T&P including hire and running charges of machineries required for the work etc complete in all respect and as per the direction of Engineer-in-charge.

Providing Fly Ash brick masonry work in Foundation & Plinth with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.

Providing Fly Ash brick masonry work in Super Structure with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. (A) GROUND FLOOR

Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-20 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair case, jali , shelves and slab etc as per approved designs and drawings having a minimum compressive strength ( in work test) 20N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost etc. complete as per direction of Engineer-in-charge. (A) PLINTH BAND

(B) LINTEL BAND & WALL BEND

(C) ROOF SLAB

Cutting,Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes of M.S plain/HYSD/TMT reinforcement bars and binding wires of 18 to 20 gaugo required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S plain/HYSD/TMT reinforcement bars consumed in the work only. (A) GROUND FLOOR

25mm thick A.S. Flooring with C.C. (1:2:4) including punning using 12 mm.size crusher broken granites chips including all cost, conveyance, labour, T&P etc. complete as per direction of Engineer-in-charge.

Providing and laying 20mm thick grading plaster in cement mortar(1:4) with water proof cement compound with curing etc. all complete as per direction of Engineer-in-charge.

12mm thick cement plaster (1:4) over brick work including all cost conveyance, royalty, taxes etc. complete as per direction of Engineer-in-charge.

12mm thick cement plaster (1:4) for cement punning and bitumen painting including all cost, conveyance, royalty & taxes etc. complete as per direction of Engineer-in-charge.

Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost all labour, T & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge.

Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost all labour, T & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge.

Supplying,fitting and fixing of vitrified tile in floors of size 600mm x 600mm, 16 mm.to 25 mm thick of approved make with application of polymere modified cement based water resistant adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T &P required for the work etc. complete as per direction of Engineer-in-charge.

Fixing ceramic tiles in floors, treads on steps and landing on 25 mm thick bed of cement mortar 1 :1 (1 cement :1 sand ) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including all cost of tiles, labour, conveyance, royality, T&P etc. complete as per direction of Engineer-in-charge.

Distempering two coats to walls with distemper of approved shade on new work to give an even shade including cost of distemper of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Note :- Sample of Paint shall be approved before procurement and use.

Painting two coats to walls with distemper one coat primer of approved shade (weather coat) to outside wall surface on new work to give an even shade including primer one coat including cost of distemper of all labour with T&P etc. complete as per specification & direction of Engineer-in-charge. Note :- Sample of Paint & Primer shall be approved before procurement and use.

Painting two coats with approved synthetic enamel paints of Asian / Berger/Dulox make and of approved colour, shade to new Iron & wood work over a coat of red-oxide primer of Asian / Berger make including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. Note :- Sample of Paint & Primer shall be approved before procurement and use.

Manufacturing, supplying and labour charges for fitting and fixing in position of M.S. grills made out of M.S angle and square bar as per approved design with one coat of anti-corrosive painting & making good to the damages of walls or R.C.C. or other structurals complete including mending or cutting sizes or grooves with cost and conveyance of all materials and labour with T&P required for the work, taxes and royalties etc. complete as per direction of Engineer-in-charge.

Supplying, fabricating, fitting, fixing & erection of M.S Anglur/Tubular truss including all cost convenyance etc. complete as per direction of Engineer-in-charge.

Cost, conveyance and labour for admixing sand & moorum (40:60) and spreading in sub base not exceeding 22.5cm in thickness and compaction to required density in OMC with PRR including hire and running charges of PRR including all cost, conveyance, royalty, T&P, labour of sand & moorum etc. complete as per specification and direction of Engineer-in-charge.

Labour for drilling a perfectly vertical borehole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories ,tools and plants and consumables etc.for lowering of 125 mm dia P.V.C./G.I. pipes for housing ,fitted with socket and with or without well screen as per the necessity for soft ,medium ,hard and boulder formation (G.I./PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of tube well ). (a) Drilling of 125 mm dia bore ( 0 mtr to 30 mtr.)

(b) Drilling of 100 mm dia bore ( 31 mtr to 60 mtr.)

(c) Drilling of 100 mm dia bore ( 61 mtr to 75 mtr.)

Lowering the following size GI/PVC pipes with or without slotted pipes as per the necesity from ground level upto 30 mtrs depth and fitted 7 fixed up in perfectly vertical position including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials ,tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above as per direction of Engineer-in-charge. (A) Lowering of 125 mm dia PVC casing pipe ( 0 mtr. To 30 mtr.)

Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and lobour as per the direction of engineer-in- charge.

Cost, supplying, laying, jointing, fitting & fixing of following size PVC/GI pipes including cost of required PHD fitting materials all cost, labour etc complete as per direction of Engineer-in-charge. (A) 125mm dia PVC pipeline

(B) 100mm dia PVC pipeline

(C) 38mm dia PVC pipeline

(D) 25mm dia PVC pipeline

(E) 12mm dia PVC pipeline

Cost, supplying, laying, jointing, fitting & fixing of different sizes fitting materials including all cost, labour etc. complete as per direction of Engineer-in-charge. (A) 12mm dia Stop Cock

(B) 25mm dia Bib Cock

(C) 38mm dia Full Way Valve

Cost, Supplying, Fitting and lowering of 1.50/1.00 H.P submersible pump set with cable, clamp and all fitting materials etc complete of approved brand as per direction of Engineer-in-charge.

Cost, Supplying, Fitting and lowering of 0.75 H.P submersible pump set with cable, clamp and all fitting materials etc complete of approved brand as per direction of Engineer-in-charge.

Cost, Supplying,Fitting and installation of 1000 ltr capacity Sintex water tank including all cost of fitting materials, labour, conveyance, T&P etc. complete as per direction of Engineer-in-charge.

Cost, Supplying,Fitting and installation of Voltas Water Cooler Model 150/150 FSS including all cost of fitting materials, labour, conveyance, T&P etc. complete as per direction of Engineer-in-charge.

Supplying and cost of all materials for construction of water stand post including cost of fitting materials, water tap etc. complete as per direction of Engineer-in-charge.

Cost, Supplying,Fitting and fixing of Gent's Urinal including cost fitting materials etc. complete as per direction of Engineer-in-charge.

Cost, Supplying, Fitting and fixing of Ladies Urinal including cost fitting materials etc. complete as per direction of Engineer-in-charge.

Cost, supplying, laying, jointing, fitting & fixing of 4" dia PVC Bend Pipes including cost of required PHD fitting materials all cost, labour etc complete as per direction of Engineer-in-charge.

Cost, supplying, laying, jointing, fitting & fixing of 4" dia P. Trap including cost of required PHD fitting materials all cost, labour etc complete as per direction of Engineer-in-charge.

Cost, Supplying,Fitting and fixing of Flushing Cistern including cost fitting materials etc. complete as per direction of Engineer-in-charge.

Cost, Supplying,Fitting and fixing of Cowels including cost fitting materials etc. complete as per direction of Engineer-in-charge.

Cost, Supplying and fixing of other fittings materials for pipe fitting including cost fitting materials etc. complete as per direction of Engineer-in-charge. (voucher to attach)

Providing, Fitting & Fixing of internal electrification including all cost of materials, labour, T&P, conveyance etc. complete as per specification & direction of the Engineer-in-charge.