SPECIAL REPAIRS TO SQUASH COURT AND CERTAIN REVENUE AND MINOR WORKS UNDER AGE BR I GE NORTH BINNAGURI

Amount

SCHEDULE `A' ( CIVIL WORK) Demolition of reinforced concrete roofs, floors ( other than ground floors), beams, staircases, landing, chajjas and similar suspended work including cutting of reinforcement in any position and including removing of demolished material from site complete all as specified and as directed.

Demolition of existing roof treatment complete of any description and in taking down existing tarfelt including tiles, lime concrete and screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 500 mtr and not exc. 1000 meter including roughening of old concrete surface of roof , cleaning the surface by wire brushing to remove all loose dust etc complete all as specified and directed.

Material and labour for 15 mm thick screed bed or bedding layers in cement mortar (1:4) with liquid water proofing compound @ 200 ml/bag of cement, in order to maintain proper slope over existing roof surfaces finished even and smooth without using extra cement for receiving treatment complete all as specified and directed. Note: (WPC shall be measured and paid separately)

Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.

Material and labour for water proofing treating to RCC roof with providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Roof Guard in 4 coats of application:- (a) apply primer coat with primer @ 0.3 Kg /sqm, (b) Over primer coat apply water proofing fibre reinforcement a width of appox 1 Mtrs @ 0.75 kg/Sqm on flat surface and ensure that there is no bubbles of creases, overlapping of the fibre is minimum of 75 mm and allow this coat dry for a period of 2-6 hours depending on atmospheric condition. (c) Apply second coat of water proofing coat @ 0.75 Kg/Sqm. (d) Apply final coat of primer @ 0.08 kg/Sqm after second coat dried properly. (Note : Water proofing treatment work shall be carried out by applicator of manufacturer only duly approved by GE in writiing.

Dismantling of corrugated steel sheets in roof coverings including ridges, removing of unserviceable material from work site complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, removing of unserviceable material from work site complete all as specified and as directed.

Supply and fixed for rolled mild stee/ hallow section tubes l in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc. grade Fe-410-W ( Gde-E-250) quality -B complete all as specified.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based tile/Kharprail profile corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Material and labour for Hard Plaster System meeting specifications for Squash Court laid down by "BOUNCE WALL WSF (World Squash Federation) Specification” The system consists of a 10 mm thick base coat with silica sand and top coat of 5 mm thick finishing coat fiber reniforced plaster of a total thickness of approx 15mm including removal of existing hard plaster complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls by applying one coat of wall care putty to achive even and smooth plastered surface and sand papering surfaces to achieve smooth surfaces and applying two or more coats of acrylic based distempe, (1st quality) ready mixed having VOC content less than 50gms/Ltr any tinted as approved, over a coat of alkaline resistant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Dismantling of boarding , any description , fixed in any position with nails including wooden frame/runner and removing of unserviceable material from work site complete all as specified and as directed.

Material and labour wooden flooring for court consist of following specification as mentioned below :- (a) Surface Board : Made of Kiln Seasoned (moisture contain of approximately 14% at the time of dispatch), Treated Maple Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with air pass groove and treated with special anti termite and water resistant lacquer. (b) The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with anti-termite solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the two wings at 350 mm x 350 mm (c) Installation:- IPS sub-floor treated with a vapour barrier to be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cushion pads to be placed on the vapour barrier in perfect level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of 8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area. (d) Floor Finishing:- After laying the flooring, the floor boards will be leveled to a uniform surface and applied a thin coat of water based polish on the face. Note: Work shall be carried out from authorised manufacturer as approved by GE.

Material and labour for complete removal of existing treatment of wall and preparation of surfaces of walls by applying one coat of wall care putty to achive even and smooth plastered surface and sand papering surfaces to achieve smooth surfaces and applying two or more coats of acrylic based distemper, (1st quality) ready mixed having VOC content less than 50gms/Ltr any tinted as approved, over a coat of alkaline resistant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for WSF approved standard Game Line Marking (wall and wooden flooring) of Squash court with required colour complete all as specified and as directed.

Supply and installation of 6400mm widthx 480mm height with wall mounting thickness of 25mm Sound Board made out of powder coated Galvanized sheet of 24 gauge fixed with wooden frame work etc. complete for Squash Court as per WSF complete all as specified . Note: Work shall be carried out from authorised manufacturer as approved by GE.

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished materialfrom work site complete all as specified.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructionscomplete all as specified top surfaces finished even and smooth without using extra cement complete all as specified. (WPC shall be measured and paid separately)

Material and labour for rendering 5mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified

Material and Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement in Cement mortar 1:6 all as specified and directed.

Material and labour for preparation of new or previously untreated surfaces of walls, chajja,facia, roof projection etc. and applying wall care white (Putty) thickness and sand papering surfaces to achieve smooth surfaces and applying acrylic smooth exterior paint of required shade two or more coat 1.67Ltr/10 Sqm over and including priming coat of exterior primer @ 2.20Kg/10Sqm including, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .

Material and labour for preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for french polishing on wooden surfaces of any description , width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified .

Material and labour for preparation of old decorated surfaces of walls, chajja,facia, roof projection etc. complete removal of existing treatment by washing, rubbing down and stopping and applying wall care white (Putty) thickness and sand papering surfaces to achieve smooth surfaces and applying acrylic smooth exterior paint of required shade two or more coat 1.67Ltr/10 Sqm over and including priming coat of exterior primer @ 2.20Kg/10Sqm including, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .

Material and labour for preparation of old plastered or unplastered surfaces of wall by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old treated wooden surface of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, (1 st quality) all as specified and directed.

Material and labour for preparation of old painted steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; pathway / hardstanding etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screeding in CM 1:6 complete all as specified (Note : screed bed shall not be measured and paid separately).

Material and labour for glazed ceramic coloured / digital printed of size ( 300 x 450 mm x 7 mm thick ) as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. (Note : screed bed shall not be measured and paid separately).

Material and labour for 8 to 10 mm thick vitrified ceramic (square/rectangular) coloured polished tiles, (1st quality) area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over and including 15 mm thick screeding in CM 1:6 complete all as specified (Note : screed bed shall not be measured and paid separately).

Material and labour for 8 to 10 mm thick vitrified ceramic (square/rectangular) dark shade coloured polished tiles, (1st quality) area of each tiles not exc 0.36 sqm and 10mm thick, in vertical surface dado etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over and including 10 mm thick back screeding in CM 1:4 complete all as specified. (Note : screed bed shall not be measured and paid separately).

Material and labour for plain cement concrete type B-1 (1:2:4), using 20 mm graded crushed stone aggregate, 40 mm thick, in floorings including finishing the surface fair and even with using extra cement to recive the tiles including necessary formwork as required complete all as specified and directed.

Material and labour for 10 mm thick vitrified ceramic (square) exterior grade (300mm x 300mm) Parking Tiles coloured polished tiles, (1st quality) in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over and including 15 mm thick screeding in CM 1:6 complete all as specified (Note : screed bed shall not be measured and paid separately).

Taking down chowkats with shutter (without taking off shutter from the frame) n exc 1.5 sqm each etc and refixing the same opening complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 sqm but n.exc.4sqm each etc including removing material from work site complete all as specified and directed.

Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing and as directed.

Supply and Fixing factory made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 4mm thick Moulded prelam PVC Sheet on the front face and 4mm Plain colour PVC sheet on back face, with particle board core fixing in frame at site as per specification & drawing complete all as specied.

Supply and fixed rolled mild steel in framed work as in grills and guard bars or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening .grade Fe-410-W ( Gde-E-250) quality -B complete all as specified.

Supply and fixed of mild steel framed work such as hung gates ( consisting of MS angle ,channel, flat bars, MS plate etc.) including pintle hinges, stops, roller, hand made sliding door bolt etc.and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

Material and labour for mild steel flat iron, as in wind ties or as in hold fast, hooks for hanging fans , clamps, supports for rainwater, ventilating pipes, including bolts,including drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290-Gde E-165 all as specified and directed.

Supply and fixed of 100 mm long stainless steel butt hinges complete all as specified and directed.

Supply and fixing 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

Supply and fixing 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified.

Material and labour for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in, filling and mass concrete in chowkat frame complete all as specified and as directed.

Supply and fixed 35 mm thick factory made door Flush shutters , solid core construction, with particle board core and plywood face panels, commercial type on both sides including for the provision of suitable blocks for mortice locks, latches or other fittings etc complete all as specified and directed.

Supply and Fixed of 100 mm long medium weight, mild steel butt hinges complete all as specified and directed.

Supply and fixing 300 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Suppy and fixed in repairs, powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified. Note: Powder coating 50 micron minimum thickness.

Suppy and fixed in repairs, aluminium anodized powder coated (Not less than 50 micron thickness) any colour window and ventilator shutter , without sash bars, of aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and with suitable locking arrangements etc.complete all as specified.

Supply and fixing 4mm thick figured glass, pin head type and ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Supply and fixing in repairs 3 mm thick plain glass, pin head type and ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Supply and fixing of plain fillets, square, rectangular or triangular in section, clean sawn, 2nd class hardwood, secured with nails or brads cross sectional area not exc.3sqcm complete all as specified.

Suppy and fixed in repairs, Welded steel wire fabric, fixed to wood or steel members complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Material and labour for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, (1 st quality) with a coat of pink primer all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,15 mm bore dia all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site, 20 mm bore dia all as directed.

Supplying , laying, jointing and testing 15 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

Supplying , laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position complete all as specified including dismantling PVC water tanks, including removing ball valve and removing unserviceable tank from work site complete all as specified

Supply and fixed ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Supply and fixed in repair Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified.

Supply and fixed in repairs white vitreous china wash down water closet pan (pedestal pattern) white bowl with cistern for coupled WC with PP soft close slim seat cover ,hinges, fixing accessories and accessories set, size 395mm x 680mm x 770mm incuding S trap 220mm icluding making all necessary connections complete all as specified and as directed.

Supply and fixed in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimumweight 300gms complete all as specified.

Supply and fixed in repairs vitreous china wash basin (WHB) , white , wall hung basin, size 540 mm x 395 mm x 185 mm with pedestal 1st quality including brackets, waste fittings , brass Chromium plated with plug and porcelain stopper for glazed basins etc. with long screw shanks and fly nuts including cutting for and pinning , waste pipe & CP waste coupling , PVC connection 450 mm long complete all as specified and as directed.

Supply and fixed in repair, 15 mm bore dia of pipe , chromium plated ,pillar taps, fancy type, cast copper alloy , with capstan heads, screwed down for 15 mm bore pipe,high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.

Supply and fixed in repairs, Chromium plated Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified.

Supply and fixed in repair CP angular stop cock fancy type, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified .

Supply and fixed in repairs PTMT connections 15 mm size with PVC nuts of length 450 mm complete all as specified.

Supply and fixing in repairs chromium plated health faucet 25 mm dia with 1.5m flexible tube and wall hook fixed in position complete all as directed.

Supply and fixed in repairs toilet paper holder continetal type chromium plated of approved quality complete all as specified and directed .

Supply and fixing CP Brass towel rail with shelf ,600mm long with lower hangers, stainless steel complete all as specified.

Demolition and breaking up drain pipes ( salt glazed ware, AC or Reinforced concrete/SWR ) set in cement mortar of 75mm/100mm dia bore and removal of unserviceable pipe from work site,all as directed.

Supply and fixed of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps complete all as specified including taking down old unserviceable pipe including fittings.

Supply and fixed in repairs of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, trenches complete all as specified.

Supply and fixing PVC (SWR) bends 110 mm bore of any radius with acess door complete all as specified

Supply and fixed for 75mm dia PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to floor or fixed in floor complete all as directed.

Supply and fixing PVC (SWR) 110mm bore junction single 'T' equal or unequal with access door complete all as specified.

Supply and fixed of PVC (SWR) vent cowl 110 mm bore complete all as specified

Supply and fixed dia bore PVC (SWR) floor trap ,plain with CP grating including jointing with solvent cement 75/100 mm dia. outlet and fixed in cement concrete Type B-1 (1:2:4) complete all as specified.

Supply and fixed in repairs of grating doom 75 mm dia of PTMT (Minimum weight 25gms) complete all as specified.

Removing and Hacking of existing deteriorated damaged & loose concrete from the external surface of the structure carefully by low impact high frequency hammer or by manual chipping without damaging the existing concrete or control sand blasting including cleaning the surfaces by air jet etc, complete and also without damaging the existing structure. Note: The rate shall also include disposal of waste/rubble/malwa from site outside MD Land along with lead and lift if any including standard steel scaffolding upto a height of 6M.

Material and labour for surface cleaning and application of Two coats of Two component epoxy zinc rich primer coat on steel surfaces / reinforcement as per manufacturer's recommendation and as per technical specification and as directed. complete including standard steel scaffolding upto a height of 6 M Make of Two component epoxy zinc rich primer : Nitozinc Primer from FOSROC and Friazinc R of Make Sika or Equivalent

Material and labour for providing and applying Structural grade long pot life, Two component Epoxy resin concrete bonding agent prior to building up of secion with any type of mortar / concrete to ensure bond between old concrete and new concrete by brush application as per manufacturers instructions and also as per technical specifications and also as directed by Engineer-in-Charge at site. Note : Make of Two component Epoxy resin concrete bonding agent : Nitibond EP from FOSROC or

Material and labour for 25 mm thick concrete surface using mechanical means with single component, shrinkage controlled, polymer modified, fibre reinforced structural grade cementitious repair mortar having compressive strength of 45 N/ Sq.mm , Flexural strength of 7 N/Sq.mm and tensile strength of 2.50 N/sq.mm at 28 Days all as per manufacturer's recommendation and technical specification and asdirected including standard steel scaffolding upto a height of 6 M Note : Make of single component, shrinkage controlled, polymer modified, fibre reinforced structural grade cementitious repair mortar : Renderoc SP 40 from FOSROC or

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes,etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/ loose soil complete all as specified.

Removing excavated material (soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Material and labour for plain cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:4 complete all as specified.

Material and Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement in Cement mortar 1:4 all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in benching and coping in drains including necessary form work complete all as specified.

Material and labour for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in surface channels and bed of drains including necessary form work complete all as specified.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified.

Material and labour for extra for forming fair finished drain or channel 25mm girth or part thereof over and under 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified.

Supply and fixed vitreous china wash basin (WHB) , counter type, white , oval shape (1st quality) of size 530mm x 445mm x 195mm, including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but including providing brackets, waste pipe & CP waste coupling , PVC connection 450 mm long complete all as specified and as directed.

Supply and fixed Vitreous China Urinals, half stall type ( back or corner wall type), complete including providing and fixing , bedding urinal against wall in cement mortar 1:2 , , pointing around urinal back in cement; securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing CP spreader, stainless steel tube 15mm dia and fixed complete all as specified and as directed.

Supply and fixed curved shaped urinal partition of 8mm thickness frosted glass of suitable size ( 900mm H x 450mm W) chrome finished including necessary fitting fixture chromium plated complete all as specified and as directed.

Supply and fixed in repair urinal valve auto closing system with built in control cock and wall flange (Pressmatic) push type suitable for urinal spreader including CP connection pipe for 15 mm bore dia. pipe, high pressure, with lever handle, complete all as specified .

Suppy and fixed of powder coated aluminium sections weighing 0.55kg/m as in aluminium partition including necessary joining cleats, glazing clips, rubber packing, beading aluminium snap beading, screws, etc. including drilling in wali, floor and ceiling (minimum thickness of powder cotaing 50 micron) including 12mm thick prelaminated particle board fixed in panel complete all as specified.

Suppy and fixed, powder coated anodised aluminium frame (100mm x 44mm x 1.5mm thickness section made of Square/tubular Aluminium section for door with one or more rebates jointing cleat for fixing etc and provision of aluminium door shutter (Single/Double shutter) including necessary jointing cleats glazing clips, rubber gasket aluminium anodised snap beading, screws, hold fast, Aluminium hinges 3Nos 100mm long for each shutter, floor stopper, locking arrangements, handle 2 nos for each door complete all as specified .

Supply and fixing of aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3, universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified.

Supply and Fixing in repairs PVC wall lining consisting of 5mm thick single side prelam wood grain PVC sheet inclusive of solvent cement and fixing at site on PVC frame including PVC sheet fillet of width 35mm as per specification and drawing complete all as specified.

Material and labour 18 to 20 mm thick jet black Granite, (table rubbed and polished) in decorative shelves, steps, pillar, jambs, cocking platform including bedded and jointed in cement mortar ( 1:4) including cutting and polishing, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screeding in CM 1:6 complete all as specified.( Note Screed bed shall not be measured and paid separately).

Supply and fixing of chromium plated stainless steel cantilever brackets to hold granite slab as design approved by GE complete all as specified.

Supply and fixing of chromium plated brass bottle trap of 32mm dia bore for wash basin including necessary connection complete all as specified.

Material and labour for false ceiling with GI powder coated frame work and 4 mm thick, (E-board) non asbesto fibre reinforced cement board , Reinforced Designer Board tiles conforming to IS-14862 and ISO-8336 , of approved texture at all height duly suspended ceiling laid on hot dip galvanised iron imposed grid of size 600 mm x 600 mm, T section / Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0 / 1:3 cement mortar complete all as specifiedand having following details: (a) 27mm x 27 mm angle 0.55 mm thickness, GI powder coated hot dip galvanised plugged at the rate 600mm centre to centre alongwith the perimeter of wall. (b) 25 mm x 25 mm Tee 0.55 mm thickness, GI powder coated hot dip galvanised as main and cross runner suspended with 1.6 mm dia GI wire suspendrs (not exc. 1.20 mtr length) with adjustable clamps and dash true fastners plugged in RCC slab or angle iron runner of slopped roof placed at the rate 600 mm centre to centre alongwith the perimeter of wall. Note: The work shall be carried out as per manufacturer instruction and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard/ dense soil complete all as specified and directed.

Material and labour for hardcore of broken stone or boulders of gauge n exc. 63 mm , deposited , spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

Material and labour for plain cement concrete 75 mm thick cement concrete type C-2, (1:3:6), (using 40 mm graded aggregate) as in sub base of floor for receiving floor finishes complete all as directed.

Material and labour for 80 mm thick coloured rubber moulded machine pressed precast conctete interlocking paver block chemically treated any shape , size and colour confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment over and including 25 mm thick sand cushion spread and laid levelled in layers complete all as specified.

Material and labour for prepolished chemically treated coloured chequered cement concrete tiles of size 300 mm x 300 mm x 25 mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified ( Note : screed bed shall not be measured and paid separately).

Material and labour for precast cement concrete type B-1 (1:2:4) using 20 mm graded crushed stone aggregate as in apex stones or kerb stone or similar article to with plain fair faces, including chamfers, weatherings, throating etc. and jointing and pointing in cement mortar 1:4 mortar including weathering, slightly rounded or chamfered angles finished the surface even and smooth without using extra cement complete all as specidied.

Excavating in post holes in soft/ loose soil ( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth or broken rubble mixed with earth around , in layer not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50 M complete all as specified.

Supply and fix mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

Material and labour for Mild steel Galvanised, (hot dipped galvanised) 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts , including,securing or tying at crossings with and Provision of galvanised mild steel wire , staples or steel pins etc. as directed ( each line wire to be measured) all as directed.

Material amd labour for Mild steel bars round bardeformed of twisted bars (TMT) 10mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified.

Material and labour for Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 but n exc 22.5cm long and 11 to 15 mm dia. of shank complete all as specified.

Supply only 4 mm dia galvanised steel wire, (Hot dipped galvanised), 50 mm x 50 mm mesh, made up into mattresses or cages, all as specified.

Fixing only chain link fencing to post old and new including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described not exc.10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying bituminous paint complete all as specified.

Material and labour for reinforced Cement concrete M-25 (Design mix), 20 mm graded stone aggregate) as in foundation including raft, footing, foundation beams, plinth beams, bases for column etc. basement slabs under rammed piles complete all as specified. Note : Design Mix shall be as per approved Design Mix of CWE/CE's running contracts.

Material and labour for reinforced Cement concrete M-25 (Design mix), 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified. Note : Design Mix shall be as per approved Design Mix of CWE/CE's running contracts

Material and labour for use and waste Formwork to concrete foundations, footing,beams of columns, rafts and bases, sides and soffits of foundation, plinth beams and similar works surfaces rough finished complete all as specified.

Material and labour for use and waste formwork to sides of pillars, posts, struts, piers. columns etc. surface square. rectangular on plan or polygonal of concrete surfaces rough finished complete all as specified.

Material and labour for Mild steel deformed or twisted bars (TMT) 8/10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , spacer, stirrups and binder hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.

INTERNAL ELECTRIFICATION Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material & Labour for consealed type point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / fan point / exhaust fan/ bell point controlled by one 5 Amps one way switch complete all as specified and as directed . Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No.135 here-in-before but for one socket out let 5/6 amps point on the independent board

All as per item No.135 above but One socket out let 5/6 amps point on the same board complete all as specified.

Material and labour wiring for 5/6 pin 6/16 Amp switch socket combination on independent boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR earth wire and connecting to earth dolly and brass screws, washers etc. including cutting chases pinning in for concealed conduit wiring and making good of disturbed surface n exc 15 cm girth complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed socket outlet 2 in 1, 5 Pin, 5/6 amps, any type complete all as specified and as directed.

Supply and fixed socket outlet 2 in 1, 5 Pin, 5/16 amps, any type complete all as specified and as directed.

Supply and fixed switch piano flush type, single pole , 15/16 Amps, one way complete all as specified.

Supply and fixed in repairs switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, of any type complete all as specified.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified.

Supply & fixed LED white glass Lamp 1 x 12 Watts, 230V Base-22 complete all as directed.

Supply and fixing of LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 double side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose complete all as specified and directed.

Material and labour for LED highbay pendent treet light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen eual to/greater than 120 per watt lumen, system wattage 80 Watt, Ingress protection IP-66 with all acessories including taking down unserviceable light fitting and removing from site complete all as specified and directed.

Supply and fixed in repairs new generation energy saving and environmental friendly long life LED street/security ing with 45 watts LED made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening including separate driver comportment with IP 66 protection & impart resistance of IKO7 with operating voltage range of 140V to 270 V olts, 120 lLumen per watt complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose and 32mm dia 1.5 mtr long bend to required shape complete all as specified.

Supply and fixed 15 watt LED lamp Post top lantern Black ABS plastic spigot, spun aluminium canopy with opal acrylic diffuser and accessories , integral fedora hat post top lantern with clear acrylic, having 120 lumen per watt, for mounted on post and 2 metre long GI tubing medium grade 50mm dia including grouted in ground with with necessary PCC work , making connection with two single core 1.5 sqmm stranded copper conductor cable from connector to light fitting all as specified.

Materials and labour for Sub main wiring with 2 runs of 6.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. [NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length]

Supplying and fixing in repairs connecting, testing and commissioning MCCB in panels etc. MCCB, 63 Amps, Four pole, adjustable, 415 Volts, 25 kA, 50 Hz Icu=100% complete all as specified and directed

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs MCB TPN 40 to 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply & fix sheet metal enclosure for 8 way Distribution Boards (DB’s), double door , single pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up including taking down old unserviceable one including MCCB / MCB complete all as specified and as directed.

Supply and fixed in repairs MCB SPN 35-63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Material and labour for Earthing complete with galvanised mild steel earth plate electrode 600 mm x 600 mm x 6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 20 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Disconnecting & taking out defective under ground LT cable from trenches, pole, pipe, floor ,wall etc including bricks ,GI pipes and removing from work site of unserviceable material and keep serviceable material for reuse in safe custody for any size complete as directed (Excavation/earth work shall be measured & paid separately under relevant item of this schedule)

Supply, laying , testing LT underground electric power cable crossed linked XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 25 sqmm 4 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts including all fixing and connecting accessories such as Aluminium cable lugs , nuts , bolts and washers etc complete all as specified . Note: (Excavation, earth work, sand cushioning, protection brick / tiles / block clamps nuts bolts washers and pipe shall be measured and paid separately under appropriate items)

Supply, laying , testing LT underground electric power cable crossed linked XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 6sqmm 2 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts including all fixing and connecting accessories such as Aluminium cable lugs , nuts , bolts and washers etc complete all as specified . Note: (Excavation, earth work, sand cushioning, protection brick / tiles / block clamps nuts bolts washers and pipe shall be measured and paid separately under appropriate items)

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed .

Material and labour for laying well burnt old size bricks, fly ash bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Supplying and fixing Galvanised mild steel pipe /tubing, light grade complete with all fittings of 50 mm bore dia, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified and directed. Note :- Excavation & Earth work shall be measured and paid separately)

Supply and fixing wall mounted fan 400mm sweep polycarbonate body with 3 Nos PVC fan blade, 900 rpm 50 Hz 230 volts AC including necessary connection and fixing fan and making good distrubed surfaces complete all as specified.

Supply and fixed of modular switch 1 way 6/10A,1 module, 230 Volts, including necessary connection complete all as specified.

Supply and fixed of modular socket, 6A-2/3 pin combined 2 module, 230 Volts AC including necessary connection complete all as specified.

Supply and fixed of modular switch 1 way 16/20A,1 module, 230 Volts, including necessary connection complete all as specified.

Supply and fixed of modular socket, 6A/16A-2/3 pin combined 2 module, 230 Volts AC including necessary connection complete all as specified.

Supply and fixing LED tube light fittings 1 x 9/10 watts energy efficient, 230 V incl 1x9/10 watt LED tube, surface / wall mounted LED batten with aluminium housing and integrated driver including holders, connector block etc. complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable all as specified and directed.

Supply and fixed recessed mounted 2' x 2 ' LED luminaire 36 watts for grid ceiling minimumm lumen output 3300 lumen, pre-treated CRCA frame powder coated with diffused Profied including necessary connection complete all as specified and directed.

Supply and fixing exhaust fan 250 mm sweep plastic rust proof body, blade with louvers 1250 rpm 50 Hz 230 volts AC including opening of wall and fixing exhaust fan and making good distrubed surfaces complete all as specified.

Material and labour for earthing complete with copper mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using copper strip 25 x 3 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- (i) Note: Excavation/PCC/Earth work/Charcoal/ Salt shall be deemed to be include in this unit rate. (ii) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Supply and fixed for 25 x 3 mm copper strip, earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or fixed to poles or roof with saddle and screw complete all as specified and as directed.

Supply and fixing Air termination, single pointed copper rod 12 mm dia and 300 mm long fixed nwith 2 Nos suitable size of nut and bolt with washer all as specified and as directed.

Supply and fixing test point terminal block made of gun metal or Phosphorus bronze size 75x75x25 mm, drilled and screwed including 3 nos. 8 mm dia. 25 mm long hexagonal head screw all as specified and as directed.

Supply and fixed heavy duty porcelain insulator to fixed aluminium strips on roof top, wall including PVC plug and gutties, screws complete all as specified.

Supplying, laying, fixing in repairs 40 mm nominal bore dia,galvanized tube medium grade for fixing of air termination on roof top including necessary PCC for fixing of tube complete all as specified and as directed.

M/S MOHAN KUMAR BANSAL

SHRI MRITYUNJOY KAR