Special repair work on the road from Turtipar to Mau border via Tangunia Sonadih temple

Providing, laying, spreading and compacting stone aggregate of specific size 22-4-53mm to water bound macadum specification including spreading in uniform thickness hand packing Rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber applying and brooming stone screening to fill up the interstices of coarse aggregate watering and compating to the required density Grading 3 as per Technical Specification Clause 405 of MORD data book.Compacted thickness 7.50 cm.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with bitumen (V.G.10) using pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with machanical broom as per 503 of MORD data book

Cleaning the existing water bound surface and laying premix 2 cm. thick over a tack coat with graded approved grit and bitumen (V.G.-10) including roller, Machinery, heating the paint to the required temperature and mixing including cartage of materials, maintenance of side patries and watering them during operation for proper completion of the work.

Providing and laying seal coat sealing the voids in a bitumenus surface laid to the specified levels grade and cross fall using type-C as per Technical Specification Clause 510

Construction of plain cement concrete pavement thickness 15 cm, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (Grade) coarse sand fine aggregatges conforming to IS.383. as per drawing and Technical specififcation clause 1501

Construction of Patri Both side with approved materials obtained from borrow pits with a lift upto 1.50M transporting to sitye ,Spreading,grading to required slope and compacted to meet requirement of Table 300.1 & 300.2 with lead upto 100m. As per Technical specification Clause 301.5

Please Enable Macros to View BoQ information