PROVN OF ANTI FUNGAL PAINT IN CERTAIN MD ACCN P-80, P-82 , P-83 AND P-84 AND CERTAIN SANCTIONED WORKS AT INS DRONACHARYA UNDER GE FORT KOCHI.

Amount

Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc.

M&L for rendering 15 mm thick in two coats (10 mm thick in cement mortar 1:4 and 5 mm thick in cement mortar 1:4) mixed with water proofing compound) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.(Note- water proofing compound shall be measured and paid seperately) .

M&L for plastering in CM 1:6, 10 mm thick on walls finished even and smooth w/o using extra cement.

Supply only liquid water proofing admixture.

Prepration of old/new decorated external wall surfaces by complete removal of existing treatement including washing down with water,removing funges growth if any ,filling the cracks with suitable sealent/putty and application of bio wash and applying two coat of Antifungal paint (Appex Ultima Protek or equivalent over a coat of primer over a coat of 2 mm thick cement based wall putty complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 110 mm bore single socketed, in any length with solvent cement joints fixed to walls incl pvc stack clamps complete all as specified.

All as per item No 6 above but 75 mm bore.

S&F PVC (SWR) bends 110 mm bore of any radius with access door including leak proof the mouth complete all as specified

S&F PVC (SWR) bends 75 mm bore of any radius with access door including leak proof the mouth complete all as specified

S&F PVC branch piece 110 mm bore, single (single Y) equal or un equal complete all as specified.

S&F PVC branch piece 75 mm bore, single (single Y) equal or un equal complete all as specified.

M&L for chip and remove all damaged and de bonded concrete and plaster from the RCC slabs by manually or mechanically so as to expose the corroded reinforcement bars including the rent of tools ,labour charges for dumping the debris with in a lido of 100 meters as directed.

M&L for supply and application of Nitozinc Primer ( Manufactured by M/s Fosroc Chemicals India Ltd) over the exposed steel reinforcement after removing the rust scales from the exposed reinforcement rods in one Sqm area including the cost of all materials, rent of tools, cost of painting brush and labour charges etc complete all as directed by Engineer-in-charge.

M&L for supply and application of Nitobond EP (Manufactured by M/s Fosroc chemicals India Ltd) epoxy bonding agent over the old concrete surface including the cost of all materials rent of tools , cost of painting brush and labour charges complete all as specified and all as directed. .

M&L for plastering with Nitobond SBR (Styrene butadin polymer bonding agent cum cement mortar/concrete modifier Manufactured by M/s Fosroc Chemicals India Ltd) modified cement mortar (1:4) under the slab to an average thickness of 40 mm , including the cost of all materials rent of tools and labour charges etc complete all as directed.

Destruction of growth of weed plants with roots level on wall/ roof of building any height with weedicides such as 'Round up' manufactured by Excel Chemical Industries and sprayed in and around roots and the place of possible growth of weeds as per manufacturers instructions and making good the surfaces complete all as specified and as directed. Notes :- (i) In case of plants that has tree like growth, the plants shall be cut very near the roof/wall and rest treated with chemical solution. (ii) Area after treatment shall be cleared of all debris, branches, dead plants etc.

Dismantling structural steel work incl doors, gates but excluding framed trusses.

S & F MS work in railings ,balusters ,posts and struts in roof etc including cutting tops to shape as directed ,including all necessary welding ,drilling bolting or reveting etc and similar work conforming to FE 290 Gde E-165 complete all as specified

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging with and including hooks and hinges, also fastening and fixing complete conforming to Fe-410W (Gde-E-250)

M&L for preparation of old/new steel surfaces over 10cm width or girth and applying two coats of VX-polymer based anti corrosive paint over a coat of anti corrosive primer complete all as specified.

Demolition of floor, hearth or wall tiling including cement concrete mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of Cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for screed bed or bedding layer of 15 mm thick in CM 1:6 for laying of floor tiles.

M&L for non skid tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and joint in neat cement slurry and pointed in white or coloured cement to match.

M&L for rendering 10mm thick on fair faces of brick work in CM 1:4 for fixing wall tiling in skirting.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting, dados and risers to steps etc.

M&L for preparation of old treated surfaces of walls and applying one coat of white wash all as specified and directed.

Taking down chowkats or frame exc 1.5sqm & n exc 4 Sqm with out taking off shutters from frame

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S/F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S/F 30mm thick second class HW glazed and skeleton window ventilator shutter open rebated and prepared to receive glass guage etc fitted with cut and mitred beads for securing glass etc size of members of shutters as per clause 8.24(b) of SSR Pt I divided into square with plain chemfered or rounded mitread and rebated sash bars any numbers complete.

S&F 3 mm thick sheet glass ordinary quality frosted on one side n.exe 0.5 sqm in each pane fixed with wooden beads.

S&F stainless steel wire cloth , 0.36 mm ,nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beadings.

S/F grating doom 100m dia of PTMT (Minimum Wt 25 gms) fixed in repairs.

S&F aluminium anodised barrel tower bolt 200mm long extruded section all as specified and directed.

S&F aluminium anodised sliding door bolt 250mm long with hasp and staple ( bolt) type all as specified and directed.

S&F aluminium anodised bow handle 150mm long cast type all as specified and directed.

S&F Viterous china wash basin,white , flat back ,size 630 x 450 , excluding taps chain and plug and porcelain stopper but including CP brass waste coupling, brackets cutting for and pinning in ends of brackets or erecting stand, etc.

S&F Pillar taps, cast copper alloy, with capstain heads, chromium plated, screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore dia of pipe.

S&F wash down water closet white (Pedestal Pattern) complete (excluding flushing cistern and flush pipe).

S&F 10 Ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets.

S&F Plastic water closet seat cover, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device for pedestal pan.

S&F CP Brass towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose Soil.

M&L for Hard core broken stone or boulders of guage n exc. 63mm, deposited , spread and levelled in layers n exc. 15cm thick and watered and rammed to a true surface.

M&L 50 mm thick cushion of coarse aggregate of 6.3 mm and below size, laid to the pattern as directed, complete all as specified and as directed

M&L machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006of 80 mm thickness M-40 Grade with grey cement and pigment.

Providing cement concrete type B0 1:2:4 (12.5 mm graded stone aggregate )as in kerbs,mud stops ,rounded or chamfered on edges

Removing excavated material (soil) exc 50 m but n.exc 100mtr and depositing where directed.

KENZ CONSTRUCTIONS

SHAIJAL T M

PS James