Comprehensive repair to roof, false ceiling, joinery, plastering, connecting pavement, plumbing, aluminium partition and connected works in 27 Camp and 28 Camp at Yol Cantt under AGE BR-I of GE (KH) YOL

Amount

SCHEDULE 'A' PART-I :- Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site, complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm not exc. 2 Sqm each and removing from site, complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm not exc. 2 Sqm each and refixing the same opening, complete all as specified and directed.

Pressed steel frames of size 105x60mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 25x3mm flat iron 230mm long hold fast etc, complete all as specified and directed.

Pressed steel frames of size 125x60mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 25x3mm flat iron 230mm long hold fast etc, complete all as specified and directed.

Plain cement concrete M-10, nominal mix, C-0, using 12.50mm graded mechanically crushed stone aggregate as in filling in pressed steel frame/hold fast of any size, complete all as specified and directed.

Factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled 35mm thick shutters without interlocking rail and with one panel and panels of 9mm BWP commercial plywood or 12mm veneered particle with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

35mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on one side and one face covered with decorative face veener with lipping/frame to match, supplied and fitted to chowkats, complete all as specified and directed by Engr-In-Charge.

Factory made 2nd class hard wood (Sal) glazed and Skelton door shutters 35mm thick open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, complete all as specified and directed.

Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick (04 No's for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf. (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 06/07. Make : As per Appendix 'C'.Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day.

M&L WPC (Wood Polymer Composit) Double Prelam Door Frame (Chowkhat) of Size 120mm x 50mm with a wall thickness of 5mm(+/- 0.25), made out of extruded 5mm(=0.25) mm thick PVC Sheet of Density 600kg/cbm manufactured y an ISO 9001-2015 certified company and by joining 3 Nos heat moulded PVC Sections. The high section of size 35 x35 mm shall be maid from plain colour PVC sheet of 5mm(=/- 0.25 mm) thickness. The inside section will be covered with 5mm thick PVC sheet'C' shape covering section of size 120mm x 50mm. At centretop position 5mm(+0.25mm) thick 50 x50 x50 mm pattam section should be pasted with solvent cemen adhesive to make double pattam of frame. The frame shall be mitre cut at two corners & joined with 4 nos of 150mm long 'L' brackets of 19 x 19 mm MS square, Tube or fusion heat welding process. The two vertical door frames are to be reinforced with 25 x 25 mm MS square Tube of 19 gauge throughout the frame. The Door Frame shall be fixed to the wall using 8/100mm fischer screws. A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc. complete as per manufacture's specification & direction of engineer-in charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of solid core single Leaf Flush Door of 25mm thickness, lipped with 15mm (5mm x 3) thick x 30 mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30 mm width on the other stiles & bottom rails. The inner panel Laminated with 2mm thick termite proof, water proof & fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain &/or prelam colors on one side after routing the mouldd design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. complete as per direction of Engineer-in-charge, manufacture's specification and drawing.

Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 180 of MES SSR 2020 Part-II, complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1), complete all as specified and directed.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Sheet glass 5.5mm thick ordinary quality and glazing with glazing clips, ruber neoprene packing, aluminium beads in squares, not exc. 0.50 sqm in each pane, complete all as specified and directed.

Sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads in squares, not exc. 0.50 sqm in each pane, complete all as specified and directed.

3mm thick figured glass, pin head type and glazing with oil putty/wooden beads in squares n exc 0.5 Sqm in each pane, complete all as specified and directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks of glavanised wire staple fixed with stainless steel wire staples, fixed, complete all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as specified and directed.

Preparation of old painted wooden surfaces of any description and otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and as directed.

Butt hinges (ISI marked), medium weight, cold rolled, mild steel 100mm long, complete all as specified and directed.

Extruded aluminium alloy handles (ISI marked), fabricated type, anodised, of size 150mm, complete all as specified and directed.

Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 100mm, fixed, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm with lipping frame to match, complete all as specified and directed.

300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165, complete all as specified and directed.

2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as as specified and directed.

S&F Prelaminted board 18/19mm thick interior grade prelaminated both side with decorative choice lamination, fixed with screws to timber frame work as on wall panelling cup boards shutters/shelves (sliding or fixed), complete all as specified and directed.

Extra over rates of 18/19mm thick block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails, complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm, complete all as specified and directed.

Extruded aluminium alloy handles (ISI marked), fabricated type, anodised, of size 75mm, complete all as specified and directed.

Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position, unframed work, complete all as specified and directed.

Dismantling boarding, any discription fixed in any postion with nails, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.50 km but n.exc 2 km (out side Mil Stn), complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced including removal of debris to a distance exc 1.50 km but n.exc 2 km (out side Mil Stn), complete all as specified and directed.

Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.

Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed.

Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, as in skirting, dado etc. set and jointed in neat cement slurry and includingincluding 10mm thick rendering in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed. including necessary cutting and waste as per site requirement pointed in white or coloured cement to match, complete all as specified and directed.

Glazed ceramic tiles of size 450x350x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with white or coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.

Water profing treatement of sunken portion and RCC roof slab using high solid content single component water based liquid applied elastomeric water proofing membrene as ASTMC 836 and ASTMD 6083, thickness of the memberane shall be 1.50mm, having solid content of more than 80% elongation of 500+(-) 50% laid over reinforcing layer on non woven geo-textile mesh of 40/50 50gms, including applying self primer coat by diluting with 1:1 ratio @ 0.20 kg per sqm and suface preparation including cleaning of existing treatement, complete all as per specified and directed by Engineer -in -Charge.

Rendering cement plaster 10mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers ( 5mm thick first layers and 5mm thick 2nd layer) mixed with WPC @ 3% weight of cement on fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and as directed by Engr-In-Charge.

Plain cement concrete M-05, nominal mix, E-2, using 40mm graded mechanically crushed stone aggregate as in sunken floors, filling and mass concrete, complete all as specified and directed.

Mild steel galvanized iron water tubing 32mm bore, 450mm long with screwed & socket joints, medium grade, as in spout of sunken floor, complete all as specified and directed.

Plain cement concrete M-15, nominal mix, type B-0, using 12.50mm graded mechanically crushed stone aggregate as in flooring, 25mm thick, surface finished even and rough to receive floor finishes, complete all as specified and directed.

Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5cm deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), complete all as specified and directed. Note:- The unit rate include for use of form work (straight or curved).

75mm thick Plain cement concrete M-10 nominal mix, C-2, using 40mm graded mechanically crushed stone aggregate as in sub base flooring, finished even and fair without using extra cement, complete all as specified and directed.

Chequered cement concrete tiles machine pressed of size 20cmx20cmx 25mm thick with grey cement, set jointed & pointed in neat cement slurry mixed with pigment to match the shade of the slab in floors laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness, laid bedded and pointed in any mortar in floors, aprons etc. including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and any position, including removal of debris to a distance exc 1.50 km but n.exc 2 km, complete all as specified and directed.

TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. For fair finished flat surfaces of concrete, complete all as specified and directed.

Marble 18 to 20mm thick, green marble, (table rubbed and polished and moulding of outer edges) as in kitchen cooking platform /shelf and verticle surfaces duly machine cut in skirting /dado and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade green marble type, complete all as specified and directed.

Machine cut kota stone slab flooring 18-20mm thick of size not less than 550 mm X 550mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC sub base, complete all as specified and directed.

Machine cut kota stone,18-20mm thick, as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in vertical surfaces such as skirting/dado/riser to step/pillar aid over and including 10mm thick bedding layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed.

Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise superficial area n.exc 100 sqcm, complete all as specified and directed.

Reinforced cement concrete, M-15 (Nominal mix), type B-1, (with 20mm graded crushed stone aggregate as) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, including formwork, complete all as specified and directed.

Rounding to edges of stone slabs of any type one edge, such as in steps cooking platform, cill of window and other simillar situations, complete all as specified and directed.

Repair to leakage/seepage in sunken portion of WC/Bath/Kitchen from outside area duly taking down brick/stone masonary or concrete surface upto the broken trap/bend/joint/pipe of any description and rectify the leakage from joints with cement sand mortar/replacement of CI/PVC trap/bend/joint/pipe and make good the disturbed portion, complete all as specified and directed by Enge-In-Charge.

Dismantling PVC drain pipes, 75mm to 110mm dia, fixed to walls, laid in floors or in trenches or in any position and removal of demolished materials from the site, complete all as specified and directed.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm in cement concrete M-15 type B-1, fixed, complete all as specified and directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors bore 110mm, complete all as specified and directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors bore 75mm, complete all as specified and directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with adjustable clamps of bore 110mm, complete all as specified and directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with adjustable clamps of bore 75mm, complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal, Branch piece 75mm bore, provided with oval access door, fixed in repair, complete all as specified and directed.

PVC (SWR) bends any radius, 110mm bore jointed with solvent cement, fixed in repair, complete all as specified and directed.

PVC (SWR) bends any radius, 75mm bore jointed with solvent cement (fitted with or without oval access door), fixed in repair, complete all as specified and directed.

PVC (SWR) 110mm vent cowl, complete all as specified and directed.

Rotational moulded polyethylene three layered water storage tank 500 Ltrs capacity (Cylinderical vertical with closed top) hoisted and fixed in position including PVC float brass ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/PVC storage tank, complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering, if required) for repair, cleaning and removing all scale and dirt, etc., from water tanks of capacity upto 1000 ltr, from mouths of circulating pipes, hoisting, reconnecting and re-fixing in position including repairing, complete all as specified and directed.

Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair, complete all as specified and directed. Make: Cat. No.: F280016/Cat. No.: F280020 of "HINDWARE' or F2002511/ F2002405 of "CERA" or Cat No. 8155/9055 of "PRAYAG" or Cat No. TQT-520/521S of "ESSCO" or equivalent makes mentioned in Appx 'C' as directed by Engr-in-Charge.

Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, snow white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-1 using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, CP jet etc and making good to floors to match existing, in repairs, all as specified. Make: Cat No. *CABLE S3020105 of 'Cera' or Cat no. ECS-WHT-453 of "ESSCO" or Cat. No.: 20004 of "HINDWARE" or Cat no. 4053/4054/4056 of "PRAYAG" or equivalent makes in Appx 'C' as directed by Engineer-in-Charge.

S&F in repair Vitreous china water closet pan (pedestal pattern), white including fixing bolts etc including fixing of plastic water closet seat cover, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, flushing cistern and flush pipe. complete all as specified and directed.

Supply and fixed in repair PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handle with brackets including 32mm dia PVC long bend flush pipe 90cm long and 15mm dia PVC connection 450mm with CP brass coupling nuts and PVC washers at both ends, fixed, complete all as specified and directed.

Wash basins, Vitreous China (Flat back type) size 450mmx300mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with CP coupling nuts at both ends, waste pipe of polythylene of low or high density or PVC of 32mm dia and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed in repair, complete all as specified and directed.

M&L 32mm dia Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ sqcm, fixed in wash basin, sinks etc, fixed in repair, complete all as specified and directed.

Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including 40mm dia waste pipe & CP waste coupling, overall size 915mm x 460mm bowl size 405mm x 355mm x 178mm, fixed in repair, complete all as specified and directed.

Chromium plated brass shower rose, fancy type (as approved by GE/Engr-In-Charge), 125mm size with shower arm, chromium plated, 195mm longh with bend of 45 degree with flange suitable for 15mm bore pipe with or without swivel joint fixed to pipe, fixed in repair, complete all as specified.

Stop/angle Valve Fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair, complete all as specified and directed.

Stop valve, cast copper alloy, fancy, type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs, complete all as specified and directed.

Bib taps, fancy type 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, chromium plated screwed for iron pipe or for brass ferrule and fixed in repair, complete all as specified and directed.

PVC connection 15mm size with PTMT nuts at boths end 600mm long and fixed in repair, complete all as specified and directed.

32mm or 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end, fixed in repair, complete all as specified and directed.

Soap dish approximate size 160x 160x90mm, chromium plated, fixed to plugs with chromium plated, brass screws, fixed in repair, complete all as specified and directed.

Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) and fixed in repair, complete all as specified and directed.

20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in repair, complete all as specified and directed. (Minimum weight 20mm - 210gms.

25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in repair, complete all as specified and directed. (Minimum weight 25mm-455gms.

Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete including removal of debris to a distance exc 1.50 km but n.exc 2 km, complete all as specified and directed.

Rendering plaster 15mm thick in cement mortar 1:6 (1 cement :6 coarse sand) on fair faces of brick wall or stone wall surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.

Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, mixed with WPC, including necessary scaffolding upto 9m, complete all as specified and directed. Note : Supply only Water proofing compound shall be measured and paid for seperately.

Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed.

Supply only intergal water proofing compound, complete all as specified.

Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over 2mm thick plaster of paries putty, complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls including complete removal of existing treatment and applying two coats of oil bound distemper over 2mm thick plaster of paries putty including cleaning the floor/joinery surfaces, glass pans, complete all as specified and as directed.

Material and labour for exterior painting work including complete removal of existing treatment and rubbish material till top surface of existing plaster and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall putty with silicon additives and sanding the surface for removal of loose particles and applying one coat of smartcare waterproof primer (Damp Prime Suprema) on wall and chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal and fungal properties, complete all as specified and directed by Engr-In-Charge. Make:- ASIAN PAINTS /BERGER /NEROLAC.

Material and labour for waterproofing of exterior walls including complete removal of existing plaster, including raking out joints, loose particles and applying two coats of acrylic polymer modified high performance coating (Smartcare Ultra Block 2k). The treatment shall be done from ground level upto suitable height as directed and providing of 15mm thick cement plaster in CM 1:4 finished even and smooth, complete all as specified and directed by Engr-In-Charge. Make:- ASIAN PAINTS /BERGER /NEROLAC.

Preparation of old plastered or unplastered surfaces of wall including complete removal of existing surfaces and applying finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed.

Preparation of old plastered ceiling surfaces and applying one coat of oil bound distemper over 1mm thick plaster of paries putty, complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of ceilings including complete removal of existing treatment and applying one coat of oil bound distemper, complete all as specified and as directed.

Preparation of old plastered or unplastered surfaces of walls of staircase area including complete removal of existing treatment and applying two coats of oil bound distemper, complete all as specified and as directed.

Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.

Taking up or down 25/32mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed.

Supplying and laying of CPVC pipes, 16mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying floors, complete all as specified and directed.

Supplying and laying of Female Brass Threaded Adaptor (FTA/ FBTA) of dia 16mm, for CPVC pipes SDR 11 & Plain CPVC SDR 11, complete all as specified and directed.

Supplying and laying of Brass elbow for CPVC pipes SDR 11 & Plain CPVC SDR 11, complete all as specified and directed.

Supplying and laying of Brass Tee for CPVC pipes SDR 11 & Plain CPVC SDR 11, complete all as specified and directed.

Supplying and laying of CPVC pipes, 20mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying floors, complete all as specified and directed.

Supplying and fixing of Union, (20mm bore dia of pipe) for CPVC pipes SDR 11 & Plain CPVC SDR 11, complete all as specified and directed.

Supplying and fixing of Brass Elbow reducer (3/4 X ½ ) for CPVC pipes SDR 11 & Plain CPVC SDR 11, complete all as specified and directed.

Mild steel galvanized iron water tubing 32mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor, complete all as specified and directed.

All as per Serial Item No. 120 above but except pipe.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified and directed.

Plain cement concrete M-15, nominal mix, B-1 using 20mm graded mechanically crushed stone aggregate as in lintels upto 1.50 metre clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, chamfered angles and throating, complete all as specified and directed. Note :- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.

Plain cement concrete M-10 nominal mix, type C-1 using 20mm graded mechanically crushed stone aggregate as in surface channel and drains, complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, complete all as specified and directed.

S&F false ceiling of Non asbestos(Designer) 4mm fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm . The aluminium fram work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4mm dia Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60mm long and expansion hold fasteners 12.50mm dia 40mm long complete all as specified directed by the Engineer-in-Charge. Make : Everest or equivalent as approved by GE.

Dismantling plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.

Corrugated galvanized iron mild steel sheets 0.63mm thick, grade ‘O’, with 275 grams per square metre zinc coating fixed with 'J' or 'L' hook as in roof covering with two corrugation side lap. (Horizontal distance of side lap shall not be less than 145mm and depth of corrugation shall be 12.50mm), complete all as specified and directed.

0.63mm thick plain galvainsed mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

All as per Serial Item No. 128 above but except sheeting.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches, pillars, complete all as specified and directed.

Walling random rubble masonry with best quality locally available stone, uncoursed, well bonded, bedded, solidly hearted and built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed.

All as per item No. 134 above but except stone.

Fly ash brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed.

Brick work with old size fly ash bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed.

S&F in repair 25mm dia powder coated mild steel, chromium plated curtain rod including brackets, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel or steel based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, complete all as specified and directed.

Joist channel, angle or tee section fixed independantly without connection plate etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), conforming to grade Fe.410-0.Gde-E-250, steel work, complete all as specified and directed.

M/S DEEPANSH ELECTRICALS (BID ID -3299030)

KISHAN CONTRACTOR (BID ID -3302469)

Eshaan Construction Co. (BID ID -3299103)

surinder kumar jindal & bros. (BID ID -3304509)