Remaining work of MMGSY-2020-21 (SCSP) Resurfacing to various Roads of Virpur Taluka Dist. Mahisagar (Non Plan) Package No. 2020-21/07.

No. without

without GST

1 Clearing and grubbing road land including uprooting wild vegetation 3.76 Hect. 28588.41

grass bushes, shrubs, sapling and trees of girth up to 300mm

removal of stumps of trees cut earlier and disposal of unserviceable

materials and stacking of serviceable materials as per Clause-201

(area of light density) by mechanical means in area of light jungle.

2 Earthwork in cutting including preparing the slope and camber and 3333.88 Cum 72.41

stacking or utilizing the cutting stuff in spoil bank as directed upto

200 meters from the end of cutting with all lead and lift.

3 Earthwork for embankment including breaking clods, dressing with 3323.95 Cum 163.77

all lead and lift including watering and consolidation from borrow area

within all lead and lift.

4 Rolling and watering of earthwork in layers with power roller including 2666.90 Cum 15.88

filling in depressions which occur during the process.

5 Scarifying gravelled macadam or bitumen macadam surface 6 cm to 8138.50 Sq.m. 22.46

10 cm.depth including stacking useful materials on road side and

disposing off remaining stuff.

6 Providing & laying compacted WBM Grading-II using MCBT metal of 1550.40 Cum 808.32

size 45mm to 63mm in required layers including using 16% stone

screening, 13.2mm size and 8% stone dust as filler including

spreading, watering and consolidation by vibratory roller as per

MORTH specification etc complete as directed by engineer in charge.

7 Providing and laying compacted of specified hard murrum in side 1051.00 Cum 290.38

shoulders including carraige of material and spreading on prepared

base including compacting as per MORTH specification etc.

8 Providing and laying bituminous grout 37.5mm thick with asphalt of 1284.55 M.T. 1585.38

grade of VG-30 at the rate of 1.99% by weight of mix for mixing

kg./10 Sq.M. for tackcoat and using B.T. chips of required gradation

including cleaning and heating asphalt premix materials by hot mix

process in proper gradation and laying with paver finisher and

consolidation by roller of 8 to 10 tonnes as per MORTH specification

including cost of all materials, asphalt, aggregates, labour charges,

royalty charges etc. completed as directed.

9 Providing and laying bituminous grout 37.5mm thick with asphalt of 1200.35 M.T. 1500.79

grade of VG-30 at the rate of 1.99% by weight of mix for mixing

kg./10 Sq.M. for tackcoat and using B.T. chips of required gradation

including cleaning and heating asphalt premix materials by hot mix

process in proper gradation and laying with paver finisher and

consolidation by roller of 8 to 10 tonnes as per MORTH specification

including cost of all materials, asphalt, aggregates, labour charges,

royalty charges etc. completed as directed.

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

10 Providing, laying and rolling 25 mm thick open graded premixed 1707.15 M.T. 2080.09

bituminous carpet with B.T. aggregate as specified and using

bitumen (VG-30) for tack coat at the rate of 2.50 kg./10 Sq.M. and

using bitumen for mixing with aggregate at the rate of 3.36% i.e.

33.60 kg/M.T. of total mix including heating and mixing in drum mix

plant and spreading the same with paver finisher and consolidation

with roller as per MORTH specification including necessary firewood,

oil, lubricants, labour charges etc. using contractor's own drum mix

plant and equipment, tools etc. completed in accordance with the

requirement of specification.

11 Providing and laying seal coat with B.T. aggregate as specified using 877.20 M.T. 2321.17

aggregate at the rate of 0.18 cum/10 Sqmt and bitumen grade (VG-

30) for mixing with aggregate at the rate of 4.50% i.e. 45.00 kg/M.T.

of total mix including heating and mixing in drum mix pant, spreading

the same with paver finisher and consolidation with vibratory roller

including necessary firewood, oil, lubricants, labour charges etc.

using contractor's own drum mix plant and equipment, tools etc.

complete in accordance with the requirement of specification.

12 Providing and laying asphalt painting on B.T surface with bitumen 23925.00 Sq.m. 22.29

grade VG-30 at the rate of 5.00 Kg / 10 Sqm by mechanical sprayer

and spreading the stone dust on prepared surface at the rate of

Cum /10 Sqm and rolling with smooth wheeled and pneumatic roller

and brushing etc. complete.

13 Providing and fixing ordinary kilometer stone of approved hard stone 16.00 No. 761.11

as per IRC type design and fixing in C.C 1:4:8 including lettering and

paints etc. complete.

14 Providing and fixing Hectometer stone as per I.R.C. type design 56.00 No. 117.23

including painting, lettering etc.complete (i) Fixing in earth.

15 Providing and fixing precast Guard stone as per I.R.C. type design 400.00 No. 56.27

including white washing etc. complete (i) Fixing in earth.

16 Direction (Junction) sign : Providing and fixing sign boards made out 6.00 No. 20282.06

of 2mm aluminium sheet / 4mm ACP (Alluminium composite panel)

size 244 x 122 cms. rectangle as per the design of IRC-67-2012. Pre

treated with phospheting process & acid etching coated with one

coat of epoxy primer and two coats of best quality epoxy paint,

reflectorised with high intensity prismatic grade retro reflective

sheeting of Type-4 as per ASTM D-4956 and latest M.O.R.T.H.

specifications, 4.0 mt. (2 Nos.) long stand post of iron angle 75 x

x 6mm / 65NB Circular MS pipe as required and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm, painted with best

quality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg including excavation, curing etc. complete under

the supervision of Engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective sheeting.

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

17 Regulatory/Mandatory sign :- Providing and fixing sign board made 32.00 No. 3509.75

out of 2mm aluminium sheet / 4mm ACP (Alluminium composite

panel) size of 60cm diameter circle as per design of IRC-67-2012.

Pre treated with phospheting process & acid etching coated with one

coat of epoxy primer and two coats of best quality epoxy paint,

reflectorised with high intensity prismatic grade retro reflective

sheeting of Type-4 as per ASTM D-4956 and latest M.O.R.T.H.

specifications, 3.6 m long stand post of iron angle 75 x 75 x 6mm /

65NB circular MS pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm, painted with best quality

epoxy coatings in black and white bends. The details of symbol for

each board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg including excavation, curing etc. complete under the

supervision of Engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contra

(B) Class-B Type-4 Retro Reflective sheeting.

18 Village Name sign : Providing and fixing sign boards made out of 12.00 No. 4822.75

2mm aluminium sheet / 4mm ACP (Alluminium composite panel)

size 90 x 60 cms. rectangle as per the design of IRC-67-2012. Pre

treated with phospheting process & acid etching coated with one

coat of epoxy primer and two coats of best quality epoxy paint,

reflectorised with high intensity prismatic grade retro reflective

sheeting of Type-4 as per ASTM D-4956 and latest M.O.R.T.H.

specifications, 3.3 mt. long stand post of iron angle 75 x 75 x 6mm /

65NB Circular MS pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm, painted with best quality

epoxy coatings in black and white bends. The details of symbol for

each board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg including excavation, curing etc. complete under the

supervision of Engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contra

(B) Class-B Type-4 Retro Reflective sheeting

19 Citizen's information Board :- Providing and fixing of typical MMGSY 6.00 No. 8545.13

information board as per instruction. Two MS plates of 1.6 mm thick,

of 900 mm x 750mm size fixed at top & bottom duly welded with MS

angles of 25 x 25 x 5 mm thick M.S plate shall be welded by two

vertical M.S flats & four horizontal M.S flates 5 mm thick to 75 mm x

75 mm of 12 SWG square tubes posts duly embedded in cement

concrete M-15 grade blocks of 600mm x 600mm x 75mm, below

ground level. Painting New letters & figure of any shade with ready

mixed synthetic enample paint of superior quality in required shade

and colour, All sections of framed posts and steel tube will be

painted with primer and two coats of epoxy paints as per drawing

Clause 1701 and annexure 1700.1 (10.16) A warranty for 7 years for

the Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor.

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

20 Hazard Marker sign : Providing and fixing sign boards made out of 24.00 No. 2843.33

1.5mm aluminium sheet / 3mm ACP (Alluminium composite panel)

size 90 x 30cms. rectangular as per the design of IRC-67-2012. Pre

treated with phospheting process & acid etching coated with one

coat of epoxy primer and two coats of best quality epoxy paint,

reflectorised with high intensity prismatic grade retro reflective

sheeting of Type-4 as per ASTM D-4956 and latest M.O.R.T.H.

specifications, 1.8 mt. long stand post and frame fabricated from

suitable size of iron angle 75 x 75 x 6mm / 65NB Circular MS pipe as

required and frame fabricated from suitable size iron angle of 35 x

x 3mm, painted with best quality epoxy coatings in black and white

bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4

CC block of size 45 x 45 x 60cms. for each leg including excavation,

curing etc. complete under the supervision of Engineer in charge. A

warranty for 7 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting

21 STOP Sign :- Providing and fixing sign boards made out of 2mm 12.00 No. 5516.22

aluminium sheet / 4mm ACP (Aluminum composite panel) size

cms. Octagonal as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint reflectorised with

High Intensity Prismatic Grade retro reflective sheeting of Type-4 as

per ASTM D-4956 and latest M.O.S.T. specifications 3.6mtr long

stand post of iron angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron angle of 35 x

x 3mm, painted with best quality epoxy coatings in black and white

bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4

CC block of size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc. complete under the supervision of engineer in

charge. A warranty for 7 years for the retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

22 Road marking with hot applied thermo plastic paint with reflectorising 1196.00 Sq.m. 266.93

glass bend on bitumen surface. Providing and laying of hot applied

thermo plastic compound 2.5mm thick including reflectorising glass

beads @ 250 gms. per Sqmt. area thickness of 2.5mm is exclusive

of surface applied glass beads as per IRC-35-2015. The finished

surface to be level, uniform and free from streaks and holes. Zebra

patta / bump patta / lane / center line/edge line/ cut patta. the white

color line should provide luminance coefficient on cement road shall

be min 130 mcd/m2/lux and asphalt road shall be min

mcd/m2/lux during the service life curing day time the marking

should meet the performance criteria for night time reflectivity, wet

reflectivity and skid resistance as mentioned in the section of IRC

15:2015. warranty for retro reflectivity shall be two years.

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

23 Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a 125.00 Rmt. 2557.46

"W" metal beam crash barrier comprising of 3 mm thick corrugated

sheet metal beam rail, 70 cm above road/ground level, fixed on

ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m

centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel

parts and fitments to be galvanised by hot dip process, all fittings to

conform to IS:1367 and IS:1364, metal beam rail to be fixed on the

vertical post with a spacer of channel section 150 x 75 x 5 mm,

mm long complete as per clause 810) with necessary excavation,

foundation concrete etc. complete

24 Excavation for foundation up to 1.50 mt. depth including sorting out 201.00 Cum 77.46

and stacking of useful material and disposing off the excavated stuff

within all lead and lift for Dense or hard soil.

25 Supplying and fixing reinforced concrete heavy duty non-pressure 120.00 Rmt. 335.46

pipes with collars for culverts including setting and joining the pipes

in C.M. 1:2 watering and laying (to level or slope) of I.S. class NP2 of

following internal diameters. (i) 300mm dia.

26 Providing and filling in foundation with ordinary cement concrete M- 48.00 Cum 1884.73

100 mix and providing necessary vertical pin headers including

formwork, vibrating, ramming and curing complete.

27 Filling around the pipes with murrum including dressing, tampering 36.00 Cum 83.87

etc. complete.

28 Providing and casting in situ ordinary cement concrete M-150 mix 132.00 Cum 2816.21

and providing necessary pin headers including shuttering,

scaffolding, laying, vibrating, curing and finishing complete without V-

Grooves. (A) Height from 0.0 M. to 5.0 M.

29 Providing and placing in position I.S.I. mark Fe-415 T.M.T. bar 0.88 M.T. 39868.85

reinforcement for following items including cutting, bending hooking

and tying complete as per detailed drawing.

30 Filling available excavated earth (excluding rock) in trenches, plinth, 120.00 Cum 68.99

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each deposited layer by ramming and watering.

31 Providing and laying weep hole in abutment and returning by using 104.00 No. 25.97

A.C. pipes / PVC pipe of 100 mm. diameter including laying in proper

grade and joining etc. comp as per detailed specifications.

TOTAL Rs.

i.e. Rs. One Crore Fourty Three lacs Sixty thousand One hundred Seven and Eighty Nine paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

It. figures

Description of Item Qty. Unit Amount

No. without

without GST

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Balasinor Mahisagar (Lunawada) Mahisagar (Lunawada)