REPAIR TO WOODEN AND STEEL FURNITURE AT MIL STN ALHILAL

Amount

Bed plywood Top (FD-246, FD-1102, FD-247 & FD-21) Renewal of following old unserviceable parts of Bed plywood Top by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable long rails made out of sheesham wood, made to shape as per drawings after taking out old broken long rails complete all as specified and directed by Enge-in-charge.

Renewal of unservicable stiffners of sheesham wood, duly wroughted as per drawings after taking out old broken/ cracked stiffeners care fully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable head rest made of sheesham wood duly covered with plywood 4.0 mm thick one side teak faced all as per drawing after taking out old broken/ cracked head rest carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable foot rest made of sheesham wood duly covered with plywood 4.0mm thick one side teak faced aal as per drawing after taking out old broken/ cracked foot rest carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable bed plywood top 12mm thick (07 Ply) BWR, commercial type of size 1800x900mm, fixed with screws and three stiffeners after taking out the unserviceable plywood top complete all as specified and directed by Engr-in-charge.

Polishing to unservicable bed new or old exposed to view with french polish after filling the holes/ cracks with putty, making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.

Bin Linen Multipurpose (FD/E6/MAP/09) Renewal of following old unserviceable parts of Bin Linen Multipurpose by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable top of Bin Linen Multipurpose, made of MDF board 18mm thick with plastic laminated sheet 1mm thick on one side approx size of top 1200x450mm complete all as specified and directed by Engr-in-Charge.

Renewal of unservicable drawer made out of MDF board 18mm thick exterior grade with laminated sheet 1mm thick on front of drawer (on one side only) complete all as specified and directed by Enge-in-charge.

Renewal of unservicable back ply of Bin Linen Multipurpose made out of ply wood 6mm thick (exterior grade) both side commercial complete all as specified and directed by Enge-in-charge.

Renewal of unservicable complete set of shutter set made out of MDF board 18mm thick, exterior grade with plastic laminated sheet 1mm thick on top only. Shutters to be fixed with mild steel chromium plated continuous piano hinges with steel screws of required size and quantity complete all as specified and directed by Engr-in-charge.

Renewal of unservicable shelf cabinet made out of 18mm thick MDF board (exterior grade) complete all as specified and directed by Enge-in-charge.

Renewal of unservicable side of Bin Linen Multipurpose made out of 18 mm thick MDF board (exterior grade) complete all as specified and directed by Enge-in-charge.

Renewal of unservicable bottom frame of Bin Linen Multipurpose made out of 18 mm thick MDF board (exterior grade) complete all as specified and directed by Enge-in-charge

Chair Dining Cushioned (FD/MAP-11/04) Renewal of following old unserviceable parts of Chair Dining Cushioned by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable front legs made out of sheesham wood, made to shape duly wroughted all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable rear legs made out of sheesham wood, made to shape duly wroughted all as per drg after taking out old broken/ cracked legs carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable side, front and back rails made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully, complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable bottom stiffners made out sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffener carefully, complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable back lower stiffner in rear leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffener carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable cushion seat of size all as per drawing, 32 density covered with valvet cloth (AS approved by Engr-in-Charge) duly stitched (Cost of valvet cloth should not be less than Rs 200 per metre) complete all as per drawing and directed by Engr-in-Charge. Make of cushion shall be : Sleepwell/ feather foam.

Polishing to chair new or old with French polish after filling the holes, cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina to the surface direct to vision, complete all as specified and directed by Engr-in-Chrge.

Chair Dining CB/ Chair Dining JCOs/ Ors (FD-279, FD-1105 & FD-16, FD/ E6/ MAP/ 05 Renewal of following old unserviceable parts of Chair Dining CB/ Chair Dining JCOs/ Ors by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable front legs made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable rear leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable side front and back rails made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable bottom stiffners made out sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffener carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable back top stiffner in rear leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffener carefully complete all as specified and directed by Eng-in-Charge.

Complete removal of seat with plastic cane of 2mm wide half round and perimeter canning with 3mm wide half round in Godrej pattern complete all as specified and directed by Eng-in-Charge.

S & F of PVC seat of chair dining size all as per drg complete all as specified and directed by Eng-in-Charge.

Polishing to chair new or old with french polish after filling the holes, cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina to the surface direct to vision complete all as specified and directed by Engr-in-Chrge.

Chair writing FD-20,250,1107, 271 & 280 Renewal of following old unserviceable parts of chair writing by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable front legs made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable rear legs made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable side, front and back rails made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable arms for chair writing made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked arms carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable bottom stiffners in rear leg made out of sheesham wood, made to shape, wrought all as per drg after taking out old broken/ cracked stiffeners carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable back top stiffners in rear leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffeners carefully complete all as specified and directed by Engr-in-charge.

Recanning of complete seat with plastic cane of 2mm wide half round and perimeter canning with 3mm wide hald round of make premium in Godrej pattern complete all as specified and directed by Engr-in-charge.

Polishing to chair new or old with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.

Chair Easy (FD-229, FD-1108 & FD-17) Renewal of following old unserviceable parts of chair easy by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable front and rear leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable side, fornt and back rails made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully,complete all as specified and directed by Engr-in-charge.

Renewal of unservicable back top stiffners in near leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffners carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable arms for chair writing made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked arms carefully complete all as specified and directed by Engr-in-charge.

Recanning of complete seat with plastic cane of 2mm wide half round and perimeter canning with 3mm wide hald round of make premium in Godrej pattern complete all as specified and directed by Engr-in-charge.

Polishing to chair new or old with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge.

Charpoy IP hard top (MAP) (FD/ MAP/ II/01) Renewal of following old unserviceable parts of CHARPOY by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of plywood top by providing 12 mm thick, 7ply grade BWR Type BB, ISI marked conforming to IS-303, commercial face plywood having size as per drawing fixed with 8mm dia round headed countor shunk bolts, 65mm long with nuts and washers including making/ drilling holes in the frame of GI pipe, 3 No's each on long rail and 2 No's each on short rail of each charpoy complete all as shown on drawings and as directed. Make:- kiptly/ National.

Welding of broken joints with gas welding/ rivetting/ nut, bolts & washer and denting of all irregular shapes at all side of charpoy, making correct shape and size and applying one coat of OG/ black/ white/ grey synthetic enamelled paints of approved quality by spray gun on steel surfaces after preparing the steel surfaces including smoothing the whole surface with emery paper, complete all as specified and directed by Engr-in-charge.

SIDE BOARD (FD-241) Renewal of following old unserviceable parts of SIDE BOARD by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable MDF board 18mm thick with plastic laminated sheet 1mm thick on one side approx size of top 1200x455mm as in top of side board complete all as specified and directed by Engr-in-Charge.

Renewal of unservicable complete drawer made out of board 18mm thick, exterior grade with 1 mm thick laminated sheet on front of drawer (on one side only) complete all as shown on drawings and as directed by Engr-in-Charge.

Renewal of unservicable back made out of ply wood 6mm thick (exterior grade) both side commercial as in back of side board complete all as shown on drawings and as directed by Engr-in-Charge.

Renewal of unservicable shutters (complete set) made out of MDF board 18mm thick, exterior grade with plastic laminated sheet 1mm thick on top only. Shutters to be fixed with mild steel chromium plated continuous piano hinges with steel screws of required size and no's all as shown on drawings and as directed.

Renewal of unservicable shelf cabinet made out of 18mm thick MDF board, exterior grade all as shown on drawings and as directed.

Renewal of unservicable side made out of 18 mm thick MDF board, exterior grade all as shown on drawings and as directed.

Renewal of unservicable bottom plank of side board all as shown on drawings and as directed.

Renewal of unservicable bottom long rail made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Polishing of side board complete with french polish on exposed to view after preparation the surface with emery paper and putty complete all as specified and directed by Engr-in-Charge.

SOFA SET FIVE SEATER (FD-1113,281,258 & FD/MAP-II/02) Renewal of following old unserviceable parts of sofa set five seater long pease by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of broken/damaged leg of sofa made of 1st class hard wood (teak) made to shape as per drawing and fixed in position with other member by fevicol and bamboo pins including two coats of polishing to replaced part wooden to match with existing part complete all as shown on drawing and as directed.

Renewal of broken/damaged long rail of sofa made of 1st class hard wood (teak) made to shape as per drawing and fixed in position with other member by fevicol and bamboo pins including two coats of polishing to replaced part wooden to match with existing part complete all as shown on drawing and as directed.

Renewal of broken/damaged siffner suppport of sofa made of 1st class hard wood (teak) made to shape as per drawing and fixed in position with other member by fevicol and bamboo pins including two coats of polishing to replaced part wooden to match with existing part complete all as shown on drawing and as directed.

Renewal of broken/damaged handle / arm rest of sofa made of 1st class hard wood (teak) made to shape as per drawing and fixed in position with other member by fevicol and bamboo pins including two coats of polishing to replaced part wooden to match with existing part complete all as shown on drawing and as directed.

Renewal of unservicable cushion foam size 21''x22''x100mm thick 32 density covered with upholstery cloth (AS approved by Engr-in-Charge) duly stitched complete all as per drawing and as directed by Engr-in-Charge. Make of cushion shall be : Sleepwell/ Feather foam.

Polishing the table with french polish after filling the holes, crack with putty and making the surface smooth with emery paper and applying raw/ burnt saina to the directs visions complete all as specified and directed by Engr-in – Charge.

Table 900x600x760mm with /without drawer (FD-284,253,254 & FD-55) Renewal of following old unserviceable parts of Table 900x600x760mm without drawer by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable leg made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rail made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rails made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable drawer of table made out of 19 mm thick pre-laminated particle board, exterial grade all as per drawings complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board size 900x600x19mm thick (OST) made to shape with teak wood edging 4mm thick all round the top as per drawings after taking out old broken/ cracked top complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes/ cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface on direct vision complete all as specified and directed by Engr-in-charge.

Table Writing (FD-275,FD-1116 & FD-33) Renewal of following old unserviceable parts of Table Writing by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable legs made of sheesham wood made to shape, wrought all as per drawings after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top long rails made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board one side teak face size 1200x600x19mm thick made to shape with teak edging 4mm thick all round the top as per drawings after taking out old broken/ cracked top complete all as specified and directed by Engr-in-charge.

Renewal of unservicable drawers all as shown on drawings and as directed.

Renewal of unservicable shutters all as shown on drawings and as directed.

Renewal of unservicable lock all as shown on drawings and as directed.

Renewal of unservicable knob all as shown on drawings and as directed.

Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface on direct to vision complete all as specified and directed by Engr-in-charge.

Table Centre (FD-274 & FD-29) Renewal of following old unserviceable parts of Table Centre by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable leg made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board size 900x450x19mm thick (OST) made to shape with teak wood edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.

Table Peg (FD-236,FD-1114 & FD-277) Renewal of following old unserviceable parts of Table peg by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable legs made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board, exterior grade, one side teak face of size 450x300x19mm thick made to shape duly teak wood edging 4mm thick all round the top as per drawings after taking out old broken/ cracked top complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge.

Teapoy Wooden (FD-278) Renewal of following old unserviceable parts of Teapoy Wooden by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable leg made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable Teapoy top made out of pre-laminated particle board size 600x450x19mm thick (OST) made to shape with teak edging 4mm thick all round the top as per drawing after taking out old broken/ cracked top carefully complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge.

Table Dining 6 pers (FD-272, FD-1115) Renewal of following old unserviceable parts of Table Dining 6 pers by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable legs made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board size 1500x900x19mm thick (OST), made to shape with teak edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes, cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.

Table dining (120 x 90 CMs) (FD/ E6/ MAP/ 10) Renewal of following old unserviceable parts of Table dining by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable legs made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in – Charge.

Renewal of unservicable long rails made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in – Charge.

Renewal of unservicable short rails made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in – Charge.

Renewal of unservicable top made of pre-laminated particle board size 1200 x 900 x 19 mm thick, one side teak face with teak wood edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-Charge.

Polishing the table with french polish after filling the holes, crack with putty and making the surface smooth with emery paper and applying raw/ burnt saina to the directs visions complete all as specified and directed by Engr-in – Charge.

Table dressing ladies with mirror/ with stool ( FD-25,FD/E6/MAP-II/07) Renewal of following old unserviceable parts of Table dressing ladies with mirror / with stool by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable mirror of size 1220mmX388mm, 5 mm thick electro copper poated totally free from distortion fixed on and including teak wood frame of size 25mmX20mm allround and 4 mm thick BWR grade (3 ply), commercial plywood in the back. Mirror shell be of polished sheet glass of make :- Atul /Modiguard as approved. The fixing and finishing shall be done in accordance with standard workmanship and drg and directed.

Renewal of unservicable bootom base with legs made to shape and size of table dressing ladies all as mentionrd in drawings with provision for finger grip. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

Renewal of unservicable top of table made of prelaminated particle board exterior grade with one side teak faced and other white face of size 19mm thick including 4mm thick teak wood edging all around all as per drawings. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

Polishing to table dresing new or old of french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge.

Renewal of unservicable leg frame including four leg with 1st class H/W teak of size reqd as per drawings. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

Chair School with Hand Board (FD/E6/MAP/05) Renewal of following old unserviceable parts of chair school with hand board by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal /replacement of old PVC seat and back of chair school in one piece complete all as specified and directed by Engr-in-charge.make- AMKO/Blow plast

Repair / replacement of U/s writing hand board made of 19 mm thick pre laminated partical board with hinges road and all conecting materials complete all as specified and directed by Engr-in-charge.

Painting to chair in full with one coat of synthetic enamelled paint black colour by spray machine after making the surface smooth with emery paper complete all as specified and directed.

Teapoy Verandah (FD-383) Renewal of following old unserviceable parts of Table Dining Ors by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of top made out of pre-laminated particle board size 900x450x19mm thick one side teak face with teak wood edging 4mm thick all round the top as per drgs after taking out old broken/cracked top carefully, complete all as specified and directed by Engr-in-charge.

Painting to frame of teapoy with 0ne coat of synthetic enamelled white paint paint over after grinding the welded surfaces, where ever necessary and smoothing the whole frame with emery paper complete all as specified and directed by Engr-in-charge.

Chair CB steel with arms and without arms (FD-75) Renewal of following old unserviceable parts of chair CB steel by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of seat of chair CB steel with arms made out of sheesham wood duly polished and canned with 2mm wide plastic cane in Godrej pattern and border 3mm wide plastic cane after removing the old seat and fixing the same with new nuts and bolts complete all as specified and directed by Engr-in-charge.

Renewal of back of chair CB steel with arms made out of sheesham wood duly polished and canned with 2mm wide plastic cane in Godrej pattern and border 3mm wide plastic cane after removing the old back and fixing the same with new nuts and bolts complete all as specified and directed by Engr-in-charge.

Renewal of arms for chair CB steel with arms made out of sheesham wood made to shape duly wroughted all as per drg after taking out old/ cracked arms carefully, complete all as specified and directed by Engr-in-charge.

Painting to chair in full with one coat of synthetic enamelled paint OG colour by spray machine after making the surface smooth with emery paper complete all as specified and directed.

CHARPOY GI PIPE WITH PLYWOOD TOP (FD-220) Renewal of following old unserviceable parts of CHARPOY GI PIPE WITH PLYWOOD TOP by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of short rail made of GI tubing 32mm internal bore medium grade ISI marked both side threaded all as per drawing after taking out old broken threaded GI tubing complete all as specified and directed by Engr-in-charge.

Renewal of long rail made of GI tubing 32mm internal bore medium grade ISI marked both side threaded all as per drawing after taking out old broken threaded GI tubing complete all as specified and directed by Engr-in-charge.

Renewal of short rail made out of tubing GI 32mm duly threaded both side retrieved from Serial No (5.01) here-in-before all as per drawings complete all as specified and directed by Engr-in-charge.

Renewal of elbow, GI, 3 way, 32mm, ISI marked after taking out cracked elbows all as per drawing complete all as specified and directed by Engr-in-charge.

Renewal of caps, GI, 32mm all as per drawing after taking out the old/ cracked caps complete all as specified and directed by Engr-in-charge.

Renewal of legs made out of tubing GI 32mm duly threaded both side retrieved from Serial No (5.01) here-in-before all as per drawings complete all as specified and directed by Engr-in-charge.

Renewal of GI check nuts 32mm all as per drawing after taking out old/ cracked check nuts complete all as specified and directed by Engr-in-charge.

Renewal of ply wood commercial 12mm thick from existing charpoy GI pipe with and including nuts & bolts 8mm dia complete all as specified and directed by Engr-in-charge.

Table Dining Ors (FD-165) Renewal of following old unserviceable parts of Table Dining Ors by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of top made out of pre-laminated particle board size 1900x685x18mm thick one side teak face with teak wood edging 4mm thick all round the top as per drgs after taking out old broken/cracked top carefully, complete all as specified and directed by Engr-in-charge.

Renewal of broken parts of frame of table dining Ors with 25mm mild steel square conduit pipe duly welded and making the welded joint smooth by grinding etc complete all as specified and directed by Engr-in-charge.

Painting to frame of table dining Ors with 0ne coat of RFU black paint over after grinding the welded surfaces, where ever necessary and smoothing the whole frame with emery paper complete all as specified and directed by Engr-in-charge.

Table Office Officer Steel (FD-84, 1003 & FD-1002) Renewal of following old unserviceable parts of Table Office Officer Steel by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Removing of dents and bends and smoothening the defective place and repairs to drawers as to slide easily in and out of the table including lock of drawers, complete all as specified and directed by Engr-in-charge.

Renewal of unserviceable top made out of size 1500x900x18mm thick pre-laminated particle board one side teak faced, exterior grade with 4mm teak wood beading all round the top, complete all as specified and directed by Engr-in-charge.

Applying one coat of OG synthetic enamelled paints of approved quality by spray gun externally as well internally after preparing the steel surfaces including smoothing the whole surface with emery paper, complete all as specified and directed by Engr-in-charge.

Table Office Clerk Steel (FD-84 & 1004) Renewal of following old unserviceable parts of Table Office Clerk Steel by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Removing of dents and bends and smoothening the defective place and repairs to drawers as to slide easily in and out of the table including lock of drawers, complete all as specified and directed by Engr-in-charge.

Renewal of unserviceable top made out of size 1200x600x19mm thick prelaminated particle board one side teak faced, exterior grade with 4mm teak wood beading all round the top , complete all as specified and directed by Engr-in-charge.

Applying one coat of OG synthetic enamelled paints of approved quality by spray gun externally as well internally after preparing the steel surfaces including smoothing the whole surface with emery paper, complete all as specified and directed by Engr-in-charge.

Table Computer (FD/ E6/ MAP/ 03) Renewal of following old unserviceable parts of Table Computer by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of unserviceable channel of drawer made of stainless steel, ISI marked after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of top made out of pre-laminated particle board exterior grade size 900x580x19mm thick (OST) made to shape duly teak wood edging 4mm thick all round the top as per drgs after taking out old broken/ cracked top, complete all as specified and directed by Engr-in-charge.

Chair Computer/ Chair revolving (TP) Renewal of following old unserviceable parts of Chair Computer by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of unserviceable hydraulic system of same make/ brand as of chair complete all as specified and approved by Engr-in-charge.

Renewal of unserviceable castor wheel, 50 mmcomplete all as specified and approved by Engr-in-charge.

Renewal of unserviceable PU handle, left and right complete all as specified and directed by Engr-in-charge. The fixing and finishing shall be done in accordance with drawings and standard workmanship.

Renewal of unserviceable base complete all as specified and directed by Engr-in-charge. The fixing and finishing shall be done in accordance with drawings and standard workmanship.

Renewal of unserviceable latherite with best quality latherite complete all as specified and directed by Engr-in-charge. The fixing and finishing shall be done in accordance with drawings and standard workmanship.

Almirah large steel shelves, Almirah large steel 1/2H, 1/2 Shelves (FD-67, FD-1031) Renewal of following old unserviceable parts of almirah large steel by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of broken /unserviceable door handle with new mild steel chromium plated handle with fittings complete all as shown on drawings, as specified and directed by Engr-in-Charge.

Renewal of unserviceable bottom based leg duly painted with a coat of zinc chrome metel primer. Mild steel sheet for legs shall be 1.00mm thick to be fixed by gas welding after removing the existing unserviceable legs complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Renewal of unserviceable almirah locks with new locks, 50mm size , 4 liver brass with duplicate keys complete all as shown on drawing, as specified and directed by Engr-in-Charge. Make : Harrison / Jayant/Link

Renewal of old worn out unserviceable shelves made out of mild steel plain sheet of 1mm thick nominal thickness, made to shape and size, complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Painting to complete almirah internally and externally both sides after preparing the surface by scraping, cleaning, denting, applying putty etc and finally applying one coat of synthetic emamel paint olive greeen by spray machine complete all as specified and directed by Engr-in-Charge.

Almirah Med Steel W/ Shelves/ Almirah Med Steel 1/2H, 1/2 Shelves (FD -67, FD-1032) Renewal of following old unserviceable parts by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of broken /unserviceable door with new door with fittings complete all as shown on drawing and as specified and directed by Engr-in-Charge.

Renewal of broken /unserviceable door handle with new mild steel chromium plated handles with fittings complete all as shown on drawing and as specified and directed by Engr-in-Charge.

Renewal of unserviceable bottom based leg duly painted with a coat of zinc chrome metal primer. Mild steel sheet for legs shall be 1.00mm thick to be fixed by gas welding after removing the existing unserviceable legs complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Renewal of unserviceable locks with new lock, 50mm size, 4 liver brass with duplicate keys complete all as shown on drawing, as specified and directed by Engr-in-Charge. Make : Harrison / Jayant/Link

Renewal of old worn out unserviceable shelves made out of mild steel plain sheet of 1mm thick nominal thickness, made to shape and size, complete all as shown on drawing, as specified and directed by Engr-in-Charge.

Painting to complete almirah internally and externally both sides after preparing the surface by scraping, cleaning, denting, applying putty etc and finally applying one coat of synthetic emamel paint olive greeen by spray machine complete all as specified and directed by Engr-in-Charge.

Locker Steel FD (FD-257, 1029) Renewal of following old unserviceable parts of locker steel by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of unserviceable/ broken shutter, bow handle, hasp & staples of size 75 X 30 X 3 mm fixed with mild steel rivet complete all as per drawing, as specified and directed by Engr-in-Charge.

Renewal of unserviceable broken legs of locker steel complete all as per drg as specified and directed by Engr-in-Charge.

Repair, denting, removal of existing paint by burning and preparing ther surface by rubbing with abbrassive emery paper, applying putty over denting portion and applying one coat of synthetic enamelled paint olive green with spray machine complete surfaces (inner & outer surfaces) of steel locker complete all as per drg as specified and directed by Engr-in-Charge.

CHAIR VERANDAH (FD-256, FD-333 & FD-359) Renewal of following old unserviceable parts of CHAIR VERANDAH by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Supply and fixing of PVC seat and back of chair verandah as per drg after applying one coat of white synthetic enamel paint and hard PVc shoes where required complete as shown on drawings, specified and as directed by Engr-in-charge.

Painting of old chair verandah (steel frame structure) with two coats of synthetic enamel white paint by spray machine after complete removal of existing paint including preparation of surface complete all as specified a

Renewal of unserviceable cane and recaning complete seat and back of chair veradah with plastic cane 4mm wide of approved quality in mat pattern, complete all as specified in drawing and directed by Engr-in-Charge.

Bed Hard Steel MAP (FD/E6/MAP/08 (R) Renewal of following old unserviceable parts of Bed Hard Steel MAP by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of unserviceable 12mm thick, 7 ply, commercial ply wood, BWR grade, ISI marked complete all as per drawings, specified and as directed by Engr-in-charge.

Painting bed steel on all side with one Coat of synthetic enanimal black paint after scraping cleaning of surfaces with abrasive paper of smooth painting complete all as shown in drawing and as directed.

Welding of steel items of furniture not exceding 2.5 cm in length and making the welding smooth by grinding etc, complete all as per drawings, specified and as directed by Engr-in-charge.

M/S Ajay Saini

jatindera enterprises

vivek and co

Kalia Construction Company