Civil and MEP works for setting up Physiotherapeutic Centre for HINDLABS at Ulloor, Thiruvananthapuram

Providing and fixing partition wall made of twin-layer construction using 12 mm thick commercial plywood conforming to IS: 1328 (BWR type) / ISI IS:303 Grade, of approved make, with decorative lamination on the exposed face and balancing lamination on the other face, using minimum 1.0 mm thick laminate hot-press bonded with approved adhesive (3M / Henkel or equivalent) in approved colour and pattern, complete. The minimum overall width of the twin-layer partition shall be 75 mm, including internal framework made of 18 mm thick BWR grade plywood, with fixing arrangement as per design. The top and side edges of the partition shall be finished with minimum 80 mm wide border using 16 mm thick BWR grade plywood on face edges with white laminate, with the top exposed surface finished in high-gloss laminate, and all exposed edges sealed with minimum 1.3 mm thick matching glossy PVC edge band, complete. Necessary decorative grooves shall be provided at all joints in laminate. The partition shall be firmly fixed to floor and adjoining walls, true to line, level and plumb, complete as directed by the Engineer-in-Charge. Measurement shall be in elevation, and only the front elevation area shall be measured for payment. (Approved makes: Plywood / Century / Greenply; Laminate/ Century / Merino / Greenlam or equivalent.)

Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including top & bottom fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

Supply of Fowler Bed with Mattress & Cushion (for Hospital Purpose) having Top flat platform made of perforated CRC sheet of thickness of 16G or better. Bed frame must be sturdy and stable to support weight of at least 170 kg. The frame structure should be made up of at least 16 G CRC, rectangular / circular pipe of 100 mm x 30 mm and mounted on trolley base made up of 100mmx30mm CR C rectangular pipe of 16 gauge. All adjustments for fowler position must be obtained from crank shaft, manually operated with stainless steel/ABS foldable handle on both the shaft. Fowler bed should be of following dimension: Mattress area of Length 2000 to 2010 mm x Width 800 to 900mm x Height: - 500 to 550mm (without mattress). The finished bed must be rust proof, pre-treated and polished Stainless Steel. The bed should have telescopic side rails of stainless steel of 22 Gauze with spring loaded locking arrangement on both sides. Should have easily removable head and foot panels made up of ABS plastic. Should have strong & good quality single wheeled total locking type Swivel Castors of 125 to 150 mm diameter with breaks on all four castors for stabilized position. There should be suitable buffer mechanism to avoid hitting of the bed to the wall from all sides. Should have provision of fixing suitable rod for hanging intravenous / irrigation fluid bottle on both sides at head end and foot end. Each bed should be supplied with 1 no. good quality I. V. rod. Should have hooks on bed frame on both side for holding urine / drainage bag (at least 2 Nos. on each side). Hooks should be in-turned to prevent injury to bystander. Bed production facility to be US FDA registered. Bed to be European CE and facility to be ISO 9001, 14001 and 13485 approved. Mattress to be four sectional and to be combination of good quality foam and coir layer and exactly fitting to the bed.

Supply of Wooden Physiotherapy Examination Table with Storage Shelf. The table measures approximately 1800 mm × 600 mm × 750mm and should use premium hardwood construction

Hospital Cubicle Curtain Work: Providing, stitching, and fixing stain-retardant and fire-retardant hospital cubicle curtains suitable for X-ray room, ultrasound room, screening area, and general patient privacy partitions, made from approved quality polyester/antimicrobial fabric of minimum 180-200 GSM, washable and colour-fast, with mesh/net panel not less than 300 mm at the top for ventilation and fire safety compliance, and overall finished curtain height not less than 2.10 m, including full-length pleating (minimum 1.5 times fullness), reinforced heading tape, stainless steel or nylon hooks/rollers, and proper hemming at bottom. The work shall include supply of cloth (minimum rate Rs. 300 per metre or above), stitching, finishing, and fixing to existing or new ceiling-mounted aluminium curtain track/rod, complete in all respects as directed by the Engineer-in-Charge. Rate shall be measured and paid per running metre (Rmt) of curtain track/rod length, inclusive of fabric quantity, stitching, accessories, labour, wastage, and all incidental charges, but excluding the cost of curtain track/rod if supplied separately, complete.

Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 150mm/230mm/300 mm thick with Grade- I AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm.

Supply, installation, and commissioning of interlocking foam mats made from high-quality EVA (Ethylene Vinyl Acetate) material designed for gym and fitness environments. The mats should come in| Im x Im sections, with a thickness of at least 1.5cm to provide| cushioning and protection for floors during high-impact exercises. The interlocking design should ensure a secure, seamless fit without] the need for adhesive, with beveled edges for easy installation and safety. Each mat should have a non-slip, textured surface for| improved traction and stability during use. The EVA material should| be durable, water-resistant, easy to clean, and free from harmful chemicals such as phthalates, ensuring both safety and longevity. The| mats should be lightweight, easy to store, and capable of withstanding] heavy use in commercial settings. Make :- Boldfit, Powermax, Kobo, Durafit, Cockatoo etc.