Spl repair Ceiling fans Exhaust fans and Provision of 15 Security lights with LED Fittings US Cables and Junction boxes on the Road from jalsa to 311 Fd Hosp and Provision of Shadowless OT Light for OT at MH Ahmadabad

Amount

S&F factory made Steel tubular swaged poles with cast iron base plate, finial taper plug, bolts, nuts and screws, type 410 SP-31 (9.00 metres long) confirming to IS 2713 & erected true vertical position duly factory painted with two coats of black bituminous paint internally through out and externally for embeded portion and applying two coats of synthetic enamel aluminium paint over one coat of red oxide primer on remaining exposed surfaces after errection & painting with synthetic enamel paint of colours black and yellow alternate strips of 30cm width upto 1.5 mtr from the top of coping including making suitable holes where required & Pole cap 0.30 m long externally fitted on pole top duly welded all as shown on TD drawing complete. Note : Excavation & earth work & PCC work shall be measured & paid separately.

S&F factory made Steel tubular swaged poles with cast iron base plate, finial taper plug, bolts, nuts and screws, type 410 SP-22 (8.5 metres long) confirming to IS 2713 & erected true vertical position duly factory painted with two coats of black bituminous paint internally through out and externally for embeded portion and applying two coats of synthetic enamel aluminium paint over one coat of red oxide primer on remaining exposed surfaces after errection & painting with synthetic enamel paint of colours black and yellow alternate strips of 30cm width upto 1.5 mtr from the top of coping including making suitable holes where required & Pole cap 0.30 m long externally fitted on pole top duly welded all as shown on TD drawing complete. Note : Excavation & earth work & PCC work shall be measured & paid separately.

Excavation in trenches in any type of hard/dense soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,Foundation filling of poles or stays.

All as per item No.27 here in before but exc 1.5 mtr or part there of in depth beyond 1.5 mtr depth.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point.

Supply and laying of DWC (double wall corrugated) HDPE pipe, ISI marked, IS 16205 (part 24) : 2017 Part II of outer dia 50 mm and inner dia 38 mm with smooth internal and profiled external surface for non pressure underground cables including all connected accessories like coupler, o-ring etc complete all as specified and directed by Engr-in-charge.

S&F, testing and commissioning LED street light fitting including driver with energy saving and enviornmental friendly made up of pressure die cast aluminium housing with high power LED 70 Watt as lighting conforming to IS-10322 (Part 5/Section 3) 2012 and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and IK07 with 10KV inbuilt Surge protection device including three core copper wire 1.5 Sqmm PVC sheathed, insulation tape, screw, clamps, nuts and bolts complete all as directed by Engr-In-Charge..

S&F, testing and commissioning LED flood light fitting 70 Watts, having Pressure die cast housing with IP66 Efficient, protection with heat resistant toughned glass with individual LED lenses (Non COB) including MS Clamps, nut and bolt & making connection with street light box or OH line using PVC insulated and sheathed single core multi stranded alumn conductor cable of size 1.5 Sqmm complete all as directed by Engr-In-Charge..

Supply and fix Polystyrene body on all sides for cable entry including cable glands, 16 Sqmm Elemex Connector including all connections (a)Clamp made of 30x5 mm flat iron duly painted with two coats of aluminium paint over a coat of red oxide primer suitable for steel tubular swaged pole type 410 SP-31.

Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes complete all as directed by Engr-In-Charge. Note: Earth work ( Excavation, Returning & refilling and removal), sand cushining , cable protection cover, GI protection pipe shall be measured and paid for seperately under respective item of Sch 'A'..

25 sqmm 4 core.

16 sqmm 4 core.

Material and labour earthing with steel earth plate electrode of size 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron wire as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, GI medium grade pipe 40 mm bore protection pipe upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing).

Material and labour earthing with steel earth plate electrode of size 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, GI medium grade pipe 40 mm bore protection pipe upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing).

Incoming:- (i) One number MCCB 250 amp, 4 pole, Ics 36 KA, 415 volts, 50 Hz with microprocessor release adjustable between 40% to 100% against overload setting .

S&F of PVC insulated & sheathed, multistranded copper conductor industrial cable 1.5 sqmm three core 1100 volt grade all as specified and directed by Engr-in-charge.

Labour & tools for horizontal boring through road / path / floor for passing UG cables by using trench less technology for laying upto 100mm dia GI pipe complete all as required. Note : GI pipe will be measured and paid seperately.

Supply install,testing and commissioning of Surgical ceiling shadowless light double dome LED Model: Glizz 60 LED 60 LED in one dome 3W 2,00,000 Lux each done with colour temperature, Auto focus, LED Light Life 50000 HRS self replacement Specification :- 1) Light intenity - 2,00,000Lux 2) Dome Diameter - 550 - 600mm 3)Depth illumination 100 - 150 mm 4) Colour Temparature - 4500 - 5000K 5) Colour rendering index - 95 Ra 6) Focussing - Auto Focus 7) LED Average Life > 50000 hrs 8) Number of LEDs - 60 +60 LEDs 9) Power Supply - 220v/50 Hz AC Power - 60+60 watts All as specified and directed by Engr-in-Charge

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm

r s corporation

ALBA AC AND REF SERVICES

Electricals India

Abhishek Enterprises

JYOT ENTERPRIES

BK CONSTRUCTION

MAA PUNAGRI ENTERPRISE