SPL REPAIR TO BLDG NO T-5-6-7A AND T-12 (OR LINE) AT A COY 5004 ASC BN (MT) AND BLDG NO T-73 (RADIO STORE) AT 4 CSR UNDER GE (S) TEZPUR

Amount

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.

Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work or unframed work

All as per Ser Itme no 2 above but In fillests, rails , posts, refters and purlins etc under 40 sqcm in section unframed work

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters

Demolition of reed lathing, single or double including battens and plasters or checken wire lathing

Dismantling floor hearth wall tiling incl cement mortar bededing(but not backing),

Dismantling Structural steel work includings door, gates, etc and similar works complete all as directed

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.

S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550Mpa as in roof covering ,including end creep at sloping end of creep length 200 mm to 250 mm etc fixed with self tapping screws as specified.Note -: Creep length shall be measured and paid in same item

All as per item No.12 above but plain sheet for ridge ,gutter,eaves borad etc fixed with self tapping screws as specified.

M&L 2nd class HW in scantling fixed clean swan in framed work/unfrmed wk

M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress (Make: E Board Everest or equivalent as approved by GE)

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangment etc.complete all as specified

S&F 30 mm thick 2nd class hard wood factory made flush shutter minimum three panel solid core construction with block board core and plywood face panels commercial type of both side.complete all as specified

S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter open rebated and prepared to receive glass, gauze etc edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified in SSR Pt I clasue 8.24 (a) complete all as specified

S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles exe. 200cu.cm and n.exe 200 cu.cm each.complete all as specified

S&F 100mm Butt hinges medium weight cold rolled mild steel

S&F Butt hinges medium weight cold rolled mild street and fixed size of hinges 50mm

S&F MS 250 mm ordinary door spring including roller and roller plate

S&F 150 mm long aluminium handle, cast type, anodised

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy fixed with screws.

S& F floor door stopper of aluminium alloy body overall length of 140 mm all as specified and directed

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete all as specified.

M&L for Machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado over 10 mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

S&F non skid eramic coloured tiles 7 to 8mm thick (square/rectangular)area of each tile esceeding 0.18 Sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointd in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:6) complete all as specified and as directed

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4.complete all as specified.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm screed bed in Cement mortar (1:4) complete all as specified and directed.

M&L 18 to 20mm thick Granite stone (of any type) work (table rubbed and polished) in cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) for in skirting/border with 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and as directed.

S& F 4.0 mm thick sheet glass ordinary quality and glazing in squares exc 0.5 sq. m in each pane in squares.complete all as specified.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.complete all as specified.

M&L 15mm thick rendering in CM (1:4) on one side of lathing finishedd even and fair without using extra cement including 0.71mm chicken wire and size of mesh 12mm.complete all as specified.

M&L 10mm thick rendering in CM (1:6) on other side of lathing finished even and smooth without using extra cement.

M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and fair without using extra cement .complete all as specified.

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and fair without using extra cement .complete all as specified.

Supply & fix in repair 20mm dia anodised aluminium alloy curtain rod with two Nos of socket complete for doors/window opening all as specified and directed.

M&L Applying two coats of Oil bound distember to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty to make surface smooth and dust free from anu undulation over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L Applying two coats of Oil bound distember to old plastered wall over a coat of 1 mm layer wall care putty to make surface smooth and dust free from anu undulation over a coat of primer including complete removal of existing treatment all as specefied and directed..

M&L preparation of newely plaseter sufaces and appplying one coats of weather coat (Apex of Asian or equivalent in dulux, Berger) over a thin layer of putty and one primer coats of damp shealth to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

M&L complete removal of existing treatment and appplying one coats of weather coat(Apex of Asian or equivalent in dulux, Berger) over a thin layer of putty and one primer coats of damp shealth to old plastered walls as per manufacturer instrcution including properly fillings the cracks and apllied by approved applicator complete all as specified and directed.

M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.8 mtr and corner and filled with bituminous filler complete all as specified and as directed.

Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.

Material and labour for old size fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Material and labour for old size fly ash /concrete best quality bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M&L 50 mm thk cement concrete type B1, (1:4:8) (20mm graded stone aggregate) as in sub bases, floors and Pavings.

M&L for chequered cement concrete tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment with antifungal treatment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new wooden surfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete as per manufacturer instruction.

M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping and like including watehreing, slightly rounded or hamfered angles and throating as directed including formwork complete.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) complete all as directed

M&L reinforced cement concrete Type B1 (1:2:4) (20mm graded aggregate) in slab supported on walls, beams, and columns, in floors, roof, landings balconies, canopies, eck slab and in shelves and the like all a specified and diredted

Formwork to soffits of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping) all as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400 including pedestal excluding taps, waste, chain and plug and porcelain stoppe but including brackets complete all as specified and directed

Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern )but including seat cover e white closed type and flush pipe complete all as specified and directed

Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M&L in repair for 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified.

Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

S&F in repairs 15 mm dia stop valve/angle valve fancy type chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.

S&F Pillar taps, 15 mm bore fancy type ,chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

M&L for laying 15 mm bore steel tubes medium grade glavanised with all fitting and fixed complete to walls/ceilings or laid in floors including taking up or down complete all as specified and directed

M&L for laying 20 mm bore steel types medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down

S&F Solid wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified and directed

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification.

Supply and fix, 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, panneling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvenet cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame all as specified and directed.

Dismantling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls/floor 110mm bore.

All as per item No 87 but 75mm bore

S&F PVC (SWR) bends any radius 75mm bore.

S&F PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore.

S&F PVC (SWR) bends any radius 110 mm bore.

S& PVC (SWR) junction single (single 'T') equal or unequal 110mm bore.

Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed.

S&FMaterial 18/19 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed.

S&F 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screwscomplete all as specified and directed.

S & F 30mm width of flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanised all as specified and directed.

S & F 40 mm cupboard knob with nut,screw and washer of mild steel .Complete all as specified and directed.

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down old U/S Flourescent/LED light fittings any type and size

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses pendants, regulators, sockets etc to be measured separately) removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.

M & L for Point wiring with 1.5 Sqmm PVC insulated and unsheatheed single core multi stranded copper conductor ISI marked 1100 volts grade drawn in casing capping on walls for fixing of switches/sockets etc with PVC sunken box for housing switches including 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable for earth continuity and connecting to common earth dolly complete all as specified and directed :-

All as in Item No-97 but For one Ceiling/Exhaust Fan point controlled by one swtich

All as in Item No-97 but For one socket point 5 Amps on the independent board

All as in Item No-97 but For one socket point 5 ams on the same board

All as per item no 97 here in before but for One 6 pin multi, socket outlet, 15 Amps , independent, with cables 2.5 Sq mm of size complete all as specified and directed.

M & L for point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through PVC conduit pipe with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed.

All as per Ser item No.102 above but for 5 amps socket on same board with other switches

All as per Ser item No.102 above but for 5 amps socket on independent board.

M&L submain wiring with two single core PVC insulated unsheathed stranded copper conductor 6 sqmm (nominal area) drawing through PVC casing caping/ conduit/existing concealed conduit and 6 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly all as specified and as directed.

M & L for switch sockets combnation 2 in 1, 5 amps flush type complete all as specified and directed. Make- Anchor / havells

M&l for socket outlet 2 in 1 3 pin 5 amps flush type complete all as specified and directed. Make- Anchor / havells

M & L for switch socket combination 3 pin 5 in 1, 5/16 Amps complete all as specified and directed. Make- Anchor / havells

M & L for ceiling rose 3 pole/PVC/polycarbonate isoloted body complete all as specified and directed. Make- Anchor / havells

S & F switch piano flush type single pole, one way 5 Amps complete all as specified and directed. Make- Anchor / havells

S & F electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified .Make- Anchor/Leader/Standard

S & F LED light batten type 20 watt, 4 feet long, slim round profile with extruded polycarbonate , environment friendly energy efficient ready to use complete all as directed and specified. Make- Havells/ Crompton/ Bajaj

S &F 20 Watt LED security light fitting, IP66 protection having top opening separate driver compartment including GI bracket and all acessories like clamp pipe etc complete all as specified and directed. Make- Havells/ Crompton/Bajaj

S & F Angle Holder PVC type with cord grip cap suitable for pendent fittings.

S & F 15W B22 Base LED bulb 3 star complete all as specified and directed. Make- Havells/ Crompton/ Bajaj

S & F in repair Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and including taking down old unserviceable DB's and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/legrand/hager.

S & F MCB DB Single pole and neutral 4 way Single door with 200 amps rated bus bar complete.

S&F in repair MCB SPN 6 to 32 Amp,c curve, 230 Volt complete all as specified and directed. Make- L&T/ Legrand/ Havells

S&F in repair MCB SP 6 to 32 Amp, 230 Volt complete all as specified and directed. Make- L&T/ Legrand/ Havells

Taking old submain wiring of any size including old unsv casing caping and all accessories complete all as specified and directed.

S & F ceilling fan of 5 star rating of 1200 sweep 230 volt Ac 50 Hz , BLDC motor type including downrod and all its accessories complete all as specified and directed. Make - Havells/ Crompton / Bajaj

Taking down ceiling fans and Hanging ceiling fans and connecting up including replacement of cable from ceiling rose to connector complete all as specified and directed.

Earthing complete with GI earth plate electronic 600 x 600x 6mm buried directly in ground vertically to a depth of not less than 2.25 m below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground level connected to GI earth lead 4 mm dia by means of nuts bolts washers etc made out of galvanized iron and GI wire connected to main switch/DB board including necessary excavation and earth work PCC (1 3 6) type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1 2 4 ) B1 using 20mm graded stone aggregate 20mm dia GI medium grade protection pipe upto main switch board etc complete all as shown in electrical plate No 3 of MES Schedule Part I.

Supply & fix Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver Cat No LUMILINEBS20WLED865SPCWH of Make: Havells

S&F Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs. Item Descrioption: HEXAFT10WLED857SSYMBOPC of Make: Havells or Equivalent in Bajaj/ Phillips/Crompton/Surya Roshni/Simoco.

S&F House service bracket (hook type complete with 3.0 m long G.I. pipe 40mm dia Med. grade, two nos 90 degree bends. M.S.hook and stay or guy

Taking down Unsv cable/ service connection complete all as specified and directed.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 2 core complete all as specified and directed.

Labour for Horizontal boring for road/path complete all as specified and directed.

S & F GI pipe 50 sqmm, Medium grade in trenches complete as directed and specified.

Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose soil for laying cables / GI pipe, foundation of pole, stay etc complete all as specified and as directed by Engr - in - Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and as directed by Engr - in - Charge.

Removing surplus excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed by Engr - in - Charge.

Material and labour sand filling in trenches with clean dry unwashed sand for cushioning of under ground cable complete all as specified and as directed by Engr - in - Charge. Note : Punned thickness of sand will be measured.

M&L for sub class 'B' brick for protection of UG cable in tranches of old size brick all as specified and directed by Engineer-in-charge.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor of 2 core x 6 Sq mm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

M/s Borah Enterprise

Chinmay Traders

M/S J.C Medhi

M/S Deep-Jeet

D G Corporation

Anil Kumar Sarmah

Sibson Constructions And Co

M/S Manjit Singh