REPAIR/MAINTENANCE OF MISC FURNITURE ARTICLES UNDER GE ROORKEE

Amount

A) Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges, denting, placing everypart in-tact, as applicable as per drgs. B) Work will be executed where the furniture exist in different user units of Roorkee Cantt/ Purkazi/Saharanpur including BSO Furniture Yard as directed by Engineer-in-Charge

Book shelf open large steel FD-69/ similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg

Top/shelf/bottom sheet

MS slot iron

Left/right sides sheets

Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, painting for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE Roorkee

M&L for running welding (not execeeding 25mm each) of steel items incl scraping preparing surface of welded portion by grinding.

Locker bed side wooden FD-222/ similar pattern. S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance after removing the existing similar unserviceable part .

Top/bottom ply 19mm thick commercial ply (BWR grade)

Side Left/right ply 19mm thick commercial ply (BWR grade)

Back ply 6mm thick commercial ply (BWR grade)

Shutter Left/Right 19mm thick commercial ply (BWR grade) with 3mm thick Teak wood edging

Leg complete

Shelf Complete 12mm thick commercial ply (BWR grade)

Shelf support bearer

Verticle partition with 12mm thick commercial ply (BWR grade)

MS continuous piano hinges, bright finish or electro galvanised 30mm width of flap when open of 1 mtr length.

Hasp & staple mild steel 75mm

Handle aluminium 100mm

S&F, M&L for tightening all loose parts where ever possible. Preparation / cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, polishing with mallamine polish with spray machine for repaired and existing good furniture.

Book case wooden Drg No- FD-355, similar pattern. S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance after removing the existing similar unserviceable part .

Top/bottom sheet with 19mm thick Teak Wood prelaminated particle Board with 3mm thick Teak wood edging.

Sides Left/right sheet with 19mm thick Teak Wood prelaminated particle Board with 3mm thick Teak wood edging.

Back sheet 6mm thick commercial ply wood (BWR grade)

S&F, M&L for tightening all loose parts where ever possible. Preparation / cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, polishing with mallamine polish with spray machine for repaired and existing good furniture.

Almirah large wooden full shelf (Drg No- FD-109/ similar pattern. S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance after removing the existing similar unserviceable part .

Back plank all as shown on drawing

Left/Right side plank all as shown on drawing

Left/Right Shutter all as shown on drawing

Almirah top/bottom plank all as shown on drawing

Leg base all as shown on drawing

Shelf all as shown on drawing

Hasp & staple all as shown on drawing

M&L for tightening all loose parts where ever possible. Preparation / cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, polishing with mallamine polish for repaired and existing good furniture.

Almirah Medium wooden Half hanging half shelf (Drg No- FD- 108 /similar pattern. S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance after removing the existing similar unserviceable part .

Back plank all as shown on drawing

Left/Right side plank all as shown on drawing

Left/Right Shutter all as shown on drawing

Almirah top/bottom plank all as shown on drawing

Leg base all as shown on drawing

Hasp & staple all as shown on drawing

Shelf all as shown on drawing

Hanging arrangement for cloth

Centre verticle plank all as shown on drawing

M&L for tightening all loose parts where ever possible. Preparation / cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, polishing with mallamine polish with spray machine for repaired and existing good furniture.

Table wooden FD-223/simlilar pattern. S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance after removing the existing similar unserviceable part .

Top complete of 19mm thick pre laminated MDF board of approved make with PVC edging

Leg all as shown on drawing

Front/rear rail all as shown on drawing

Left/right Side rail all as shown on drawing

M&L for tightening all loose parts where ever possible. Preparation / cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, polishing with mallamine polish with spray machine for repaired and existing good furniture.

Table office Officers wooden DB-4119/simlilar pattern. S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance after removing the existing similar unserviceable part .

Leg all as shown on drawing

Front/rear rail all as shown on drawing

Left/right Side rail all as shown on drawing

Drawer made out of 12 mm thick pre laminated MDF Board

Shutter 12 mm thick pre laminated MDF Board

Hard Top complete of 19mm thick pre laminated MDF Board with PVC edging

S&F, M&L for tightening all loose parts where ever possible. Preparation / cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, polishing with mallamine polish with spray machine for repaired and existing good furniture.

Table Office clerks DB-4110/simlilar pattern. S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance after removing the existing similar unserviceable part .

Leg all as shown on drawing

Front/rear rail all as shown on drawing

Left/right Side rail all as shown on drawing

Drawer all as shown on drawing

Shutter all as shown on drawing

Hard Top complete of 19mm pre laminated MDF Board and PVC Edging

S&F, M&L for tightening all loose parts where ever possible. Preparation / cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, polishing with mallamine polish with spray machine for repaired and existing good furniture.

Table Dressing Gents wooden FD-230 & FD/E6/MAP/16 and similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance.

Looking mirror 5.5mm thick

Back sheet of mirror with 6mm thick plywood

Mirror frame complete all as shown on drg

Drawer complete for FD-230 as shown on drawing

Knob for FD-230 as shown on drawing

Top /bottom sheet of base with 12mm thick pre laminated MDF board for FD-230

Left/right/partition sheet of base 12mm thick pre laminated MDF board for FD-230

Bottom back sheet of base 6mm thick commercial ply frame for FD-230

S&F, M&L for tightening all loose parts where ever possible. Preparation / cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, polishing with mallamine polish with spray machine for repaired and existing good furniture.

Table 3’x3’ without drawer/similar pattern FD- 291/similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg. All as directed.

Top of 19mm thick pre lamineted MDF board with pvc edging

Stiffner of Leg as shown on drawing

Leg as shown on drawing

Front/back/left/right Rail as shown on drawing

Bracket of teak wood 75mmx75mmx20mm as shown on drawing

S&F, M&L for tightening all loose parts where ever possible. Preparation / cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, polishing with mallamine polish with spray machine for repaired and existing good furniture.

Form without back (steel frame) FD-77/ similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg including welding as necessary complete all specified and directed

Seat plank complete with french polish as shown on drawing

Centre support Stiffners complete as shown on drawing

Top/bottom short stiffner as shown on drawing

Leg as shown on drawing

Rubber shoe as shown on drawing

Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, welding minor defects, painting for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE Roorkee

Teapoy verandah steel FD-208, similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg including welding as necessary complete all as directed.

Hard Top of 19mm thick pre lamineted MDF board with pvc edging

Leg frame complete as shown on drawing

Flat iron top frame complete as shown on drawing

Rubber shoe as shown on drawing

Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, including welding as necessary, painting for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE Roorkee

TABLE Wooden 5'x2'10" FD139 /similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg. All as directed.

Hard Top of 19mm thick pre lamineted MDF board with pvc edging

Long rail as shown on drawing

Short rail as shown on drawing

Leg as shown on drawing

Bracket of teak wood of size 75mmx75mmx20mm

Mallamine Polishing at furniture yard/Md/OTM buildings.

Locker two unit steel FD 127 (M) and similar pattern. Removing the existing unserviceable part and S&F following similar new part, including welding as necessary as per Drg and as directed by engr-in-charge for day to day maintenance.

Door shutter without lock as shown on drawing

Lock make Godrej /Harison as shown on drawing

Leg as shown on drawing

Preparation, cleaning of existing decorated surface/ rubbing by emery paper, removing all, filling with putty, including minor welding painting for repaired and existing good furniture as directed at site, at furniture yard, Md, OTM buildings under AOR of GE as directed by Engr-in-Charge.

Table Dressing Ladies wooden FD- 251 & FD/MAP-II/07 similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance.

Looking mirror 5.5mm thick as shown on drawing

Back sheet of mirror with 6mm thick plywood as shown on drawing

Mirror frame complete all as shown on drg

Drawer complete without knob/handle as shown on drawing

Leg with support frame for FD-251 as shown on drawing

Knob for FD-251 as shown on drawing

Sliding glass for FD-251 as shown on drawing

Aluminium channet complete set for FD-251as shown on drawing

Top /bottom sheet of base frame for FD-251 as shown on drawing

Left/right/partition sheet of base frame as shown on drawing

Bottom back sheet of base frame for FD-251 as shown on drawing

Stool canned for FD-251 as shown on drawing

Stool cushioned for MAP pattern as shown on drawing

D type 75mm aluminium Handle for door for MAP pattern as shown on drawing

S&F, M&L for tightening all loose parts where ever possible. Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, mallamine polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.

Rack adjustable 6 tier steel FD-106 (M) and similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance.

Rack/shelf including Nut bolts as shown on drawing

Steel angle frame of size as shown on drawing

Preparation, cleaning of existing decorated surface/ rubbing by emery paper, removing all s, filling with putty, including minor welding if necessary, painting for repaired and existing good furniture as directed at site, at furniture yard, Md, OTM buildings under AOR of GE as directed by Engr-in-Charge.

Table writing wooden FD-275, similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.

Leg as shown on drawing

Long rail as shown on drawing

Short rail as shown on drawing

Drawer as shown on drawing

Drawer bearer as shown on drawing

Shutter as shown on drawing

Shelf as shown on drawing

Side sheet left/right made out of 19mm thick plywood as shown on drawing

Back sheet made out of 19mm thick plywood as shown on drawing

Knob as shown on drawing

Hinge as shown on drawing

Stiffener complete at bottom as shown on drawing

Top 19mm thick pre laminated MDF board with pvc edging

Bracket of size 75x75x25mm

Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, mallamine polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.

Table Peg wooden FD-384 and similar pattern:- Removing the existing unserviceable part and S&F following similar new part of well seasoned Ist class hard wood (Teak) as per Drg and as directed by Engr-in-charge.

Stiffener set of Leg as shown on drawing

Leg without PVC ring as shown on drawing

Long rail as shown on drawing

Short rail as shown on drawing

PVC ring as shown on drawing

Bracket as shown on drawing

Top 19mm thick pre laminated MDF board with pvc edging

M&L for preparing old decorated / new wooden surfaces by removing all spots, filling all cavities with putty, rubbing with emery paper to smooth the surfaces and applying two or more coats of mallamine polish to give shiny finish including filler coat on new wooden surfaces (if required) complete at furniture yard / Md / OTM buildings under AOR of GE as directed by Engr-in-Charge.

Side Board (Drg No- FD- 1112 /similar pattern. S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance after removing the existing similar unserviceable part .

Shutter as shown on drawing

Top 19mm thick pre laminated MDF board with pvc edging

Left/right side ply complete as shown on drawing

Drawer as shown on drawing

Back ply 6mm thick commercial ply complete as shown on drawing

Knob as per sample as shown on drawing

Bottom frame with four leg made of 1st class well seasoned Teak wood

S&F, M&L for tightening all loose parts where ever possible. Preparation / cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, polishing for repaired and existing good furniture.

Form with back steel FD-78/ similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Seat plank, made of first class hard teak wood. as shown on drawing

Back plank, made of First class hard teak wood. as shown on drawing

Centre support stiffners complete as shown on drawing

Top/bottom short stiffener as shown on drawing

Leg as shown on drawing

M&L for preparing old painted / new steel surfaces of chair writing steel including removing dents/spots (if any), tightening the loose joints, cleaning the surfaces, rubbing by emery paper, filling the gaps with putty and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new /welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Bed plytop wooden Drg No - FD-246 and similar pattern. S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance after removing the existing similar unserviceable part.

Stiffner as shown on drawing

Long rail as shown on drawing

Short rail as shown on drawing

Head rest complete without Leg as shown on drawing

Foot rest complete without Leg as shown on drawing

Head Leg as shown on drawing

Foot Leg as shown on drawing

Plywood 12mm thick BWR Grade as shown on drawing

Charpoy IP Ply Top FD 388®

12 mm thick plywood top Marine grade as per existing shape and size with 8 Nos shunken nut/bolts, appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed

Hard rubber shoe std quality as shown on drawing

Welding work wherever required as shown on drawing

Repair/ replacement of Iron Frame head/leg as shown on drawing

M&L for preparing old painted / new steel surfaces including removing dents/spots (if any), tightening the loose joints, cleaning the surfaces, rubbing by emery paper, filling the gaps with putty and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new /welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Sofa wooden FD-FD/MAP-II / 02 ( Five seater/ Four seater/ similar pattern) Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance.

Leg front as shown on drawing

Vertical rail/Leg of Back as shown on drawing

Side rail of Seat as shown on drawing

Arm rest of seat as shown on drawing

Beares/stiffner of Seat as shown on drawing

Ply of Back for single seater as shown on drawing

Ply of Seat for single seater as shown on drawing

Front rail of Seat of single seater as shown on drawing

Rear rail of Seat of single seater as shown on drawing

Top/bottom rail of back of single seater as shown on drawing

Removing of existing U/S cushion from sofa sets five seater and supply & fixing cushion for seat & back made out of size 21"x22" x100mm thick high 40 density foam duly stitched with good quality white cloth inside & tapestry cloth outside superior quality rate not less than Rs. 500- Per mtr for each width of 4 feet. Cushion make Kurlon, Restwell, Feather foam

M&L for preparing old decorated / new wooden surfaces of three piece five seater by removing all spots, filling all cavities with putty, rubbing with emery paper to smooth the surfaces and applying two or more coats of mallamine polish to give shiny finish including filler coat on new wooden surfaces (if required) complere at furniture yard / Md / OTM buildings under AOR of GE as directed by Engr-in-Charge.

M&L for preparing old decorated / new wooden surfaces of sofa four seater by removing all spots, filling all cavities with putty, rubbing with emery paper to smooth the surfaces and applying two or more coats of mallamine polish to give shiny finish including filler coat on new wooden surfaces (if required) complere at furniture yard / Md / OTM buildings under AOR of GE as directed by Engr-in-Charge.

Chair Auditorium, make RANA Chairs. Drg No. TP/similar pattern : Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Seat made of ABS plastic with suitable fixing arrangements suitable for existing Auditorium chairs

Back made of ABS plastic with suitable fixing arrangements suitable for existing Auditorium chairs.

Cushion for seat, best quality suitable for existing Auditorium chairs

Cushion for back, best quality suitable for existing Auditorium chairs

Tapestry cloth best quality for seat. Colour of tapestry cloth as approved by GE.

Tapestry cloth best quality for back. Colour of tapestry cloth as approved by GE suitable for existing Auditorium chairs

Spring for seat (auto lift function), best quality suitable for existing Auditorium chairs

Spring for back (push back function), best quality suitable for existing Auditorium chairs

Rod (16 mm square Rod) under seat with suitable fixing arrangements for seat movement suitable for existing Auditorium chairs

MS strip as shown on drg at bottom of seat for support of seat for touching from ground suitable for existing Auditorium chairs

Side ply with suitable fixing arrangements with best quality tapestry cloth cover. Colour of tapestry cloth as approved by GE suitable for existing Auditorium chairs

MS strip for side ply support suitable for existing Auditorium chairs

Arm rest handle best plastic as approved by GE suitable for existing Auditorium chairs

Chair base steel for mounting it on ground suitable for existing Auditorium chairs

M&L for preparing old painted / new steel surfaces of chair auditorium including removing dents/spots (if any), tightening the loose joints, filling the gaps with putty, cleaning the surfaces, rubbing by emery paper, including minor welding as necessaryand applying one coat of synthetic enamel paint on old painted surfaces and two coats on new / welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

AMARJEET SINGH AND CO.

JAISWAL ENTERPRISES

VARAROHA BUILDERS

VINAYAK CONSTRUCTION COMPANY

PACHNANDA BUILDERS