Construction of 33kV line 9.10 km (including 2.50 km UG line) at Govt. ITI Dahariya, Haldwani and 33kV Bay

Amount

S.T POLE SP-72 13 mtr Long (Bottom portion Hot Dip Galvanised)

MS Channel 125x65 mm

M.S Angle 65x65x6 mm

33 KV 10 KN Polymer Pin Insulator With Pin

33 KV Polymer Disc Insulator (B&S type)

33 KV Disc fitting (B&S type) for Panther Conductor 90 KN

11 KV Polymer Pin insulator with Pin

11 KV Polymer Disc insulator

11 KV Disc fitting

ACSR Dog Conductor

Stay Set GI 20X1800 mm

Stay wire 7/8 SWG

Earthing Rod 20x2500 mm

GI Wire 5mm/6 SWG

GI Wire 8 SWG

ACSR Panther Conductor

Earth wire 16 SWG

MS Angle 75x75x8 mm

MS Angle 50x50x6 mm

Cable AL 3X400 Sq.mm XLPE 33KV

Cable jointing kit for 33 KV XLPE 3x400 Sqmm Outdoor

MS Channel 100x50 mm

33KV outdoor type lightning Arrester

33KV, 3 Pole, 1250A Line Isolator with earth switch

33KV, 3 Pole, 1250A Bus Isolator

33KV Outdoor type CT 600/300/1-1-1A with Junction Box

2Cx2.5mm LT control cable

4Cx2.5mm LT control cable

6Cx2.5mm LT control cable

33 KV 1250A 3 Phase O/D type VCB 24 V DC

33 KV Disc Insulator Polymer 70 KN, B & S Type

Disc fitting for Dog 70 KN

PP & Top channel clamp with N&B made by 65x6 mm flat for SP-72

PP & clamp for dropper angle with N&B made by 65x6 mm flat for SP-72

E clamp with bolts & nuts for 33 KV Pin

Earth wire clamp with bolts & nuts For SP-72

Bolts and nuts off size

Stone Pad

PG clamp for Panther to panther conductor

Top Bracing set clamp with N&B for SP-72

Bottom Bracing set clamp with N&B for SP-72

Danger board 33 KV with clamp, N&B

Number plate with clamp & N&B

Barbed wire

Holding clamp for barbed wire with Nut & Bolt for SP-72

Holding clamp for Supporting Angle with N&B for SP-72

PP & Top channel clamp with bolts and nut made by 50x6 mm MS flat

Stay clamp with nut & bolt

Bolt & nut 150x12 mm

Bolt & nut 50x16mm

Eye Bolt 190x16 mm with nut

Stay insulator of size 140x85 mm

Clamp for holding cable made of MS flat 50x6mm

GI strip 50x6 mm

Holding PP Clamp with nut& Bolt

Straight Through Cable jointing kit for 33 KV XLPE 3x400 Sqmm

PP & clamps with nut & bolts

GI strip 45x5mm

T-connectors Panther to Panther for busbar

Connectors suitable for LA suitable for Panther

Connectors suitable For Isolator suitable for Panther

Connectors suitable For CTs suitable for Panther

Connectors suitable For VCB suitable for Panther

MS Plate 400x400x8 mm.

MS plate 225x225x8 mm thick

Supporting Clamp for top channel/ bracing clamp with N&B for SP-72

Description of Work / Item(s)

Amount

Excavation of earth pit for all type pole structure

Erection of following Structure Complete With all Fitting & Accessories Single pole Support of ST Pole SP-72

Double pole Support of ST Pole SP-72

Tri pole Support of ST Pole SP-72

Four pole Support of ST Pole SP-72

Stud pole ST pole SP-72

Grouting of Poles in cc 1:4:8 Cement ,sand,20 mm gauge stone ballast.

Muffing of pole in 1:3:6 cc size of 0.45x0.45x0.4 mtr

Fabrication charges of MS channels and angles.

Excavation of earth for stay pit of size 0.6x0.6x1.5 mtr in all types of soil including proper dressing of sides and ramming of bottom including getting out the exacavated soil and disposel of surplus exacavated soil as directed complete work.

Grouting of stay in size0.6x0.6x0.3 mtr in CC CC 1:4:8 block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, levelling.

Fixing, tightening and nozling of stay wire with pole & stay rod.

Earthing of support with MS Earth rod of 2.5 Mtr long including excavation of pit 0.6mtr below ground level and ramming of MS rod upto full length and connecting the earth electrode with pole by GI wire and nut & bolt.

Labour charges for Guarding at River/Road/Telephone/HT/LT Line crossing

Laying,sagging & stringing of 3-Phase 4-Wireoverhead line by ACSR panther Conductor & 7/16 SWG Earth wire with route clearence including jumpering and binding.

Painting of structure with one coat of red oxide and two coat of Aluminium paint. Single pole Support of ST Pole SP-72

Double pole Support of ST Pole SP-72

Tri pole Support of ST Pole SP-72

Four pole Support of ST Pole SP-72

Stud pole ST pole SP-72

Cable stand erection Exacavation of earth in all type of soil 4x0.6x0.6

Febrication Charges

Grouting of cable stand in CC 1:3:6 (0.6X0.6X4) including muffing.

Earthing of cable stand structure with making triangle GI Strip bridge including supply of all material.

Painting charges of cable stand complete with one coat of red oxide and two coat of Aluminium paint.

Erection of D/Ckt 33KV Underground Cable laying Fabrication Charges of MS items

Digging open trench 120cm deep and 45cm wide and prepare 10 cm thick fine sand cushion and then Laying of 33KV 3X400Sqmm cable over this cushion,then covered the cable with another 10cm thick sand layer.The trench is then covered with brick and other material covering all around cable protected on sides and top as per site requirement.

Making trench with trenchless technology for 33KV at road crossing with laying of D/Ckt cable in HDPE Pipe/GI Pipe.

Laying of cable for loop etc.

Supply and Laying of of HDPE pipe 160mm outer dia,6mm thickness.

Supply and fixing of GI Pipe (with Socket) 4or 5 inch dia at points of road crossing, cable rising etc ( B Class)

Fixing of 33 KV 3core XLPE Outdoor cable jointining kit of 400 Sqmm

Fixing of MS Channel,Holding clamp for cable support.

Making pit of size 5X2X2 mtr for filling and fixing of 33KV Straight through joint kit with back filling,ramming and compaction upto complete restoration.

Shiffting of 11 KV Line Shifting of 11 kv Single Circuit line to Newely erected SP 72 Pole

Shifting of 11 kv Double Circuit line to Newely erected SP 72 Pole

Making of 11 kv Section at different places

Dismantling of old poles with acessories in healthy condition and back cartage to store centre

Dismantling of old poles with acessories by cuttting from the base and back cartage to store centre

Lopping chopping of tree branches coming in the route of new 33 kv line

Erection 33 KV Bay for 33KV Outgoing Line Fabriction of all Structure such as Terminal Gantry,CT,Bus Isotalor,Line Isolator.

Erection of all Structure such as Terminal Gantry,CT,Bus Isotalor,Line Isolator,Meter Cubical.

Making cable trench.including fabrication, fixing of MS angle 40x40X5 mm in sze 50x30cm including the cost of MS Angle/ MS bar on side edge with all excavation, CC work, brick work, fixing of cable support angle one/two tier as required with stopper arrangement at 0.5 mtr gap throughout the length of the trench, making of cable trench covers with MS Bar welded mesh angle frame with lifting hooks, fixing of perforated tray 200 mm width complete as per drawing including cost of perforated tray,sand,cement, bricks, metal (gitti) etc.

Labour charges for drawing bay & making connection in each equipment, main & auxilary bus bar.

Excavation of earth in mixed soil for foundation of CB stand

Grouting of CB stand with C.C. in 1:3:6 ratio

Cement Plaster 1:4, on top & side walls

Fixing and erection of 33KV Vaccum circuit breaker

Laying, spreading & jointing of LT control cable by using propers ties,lugs, connectors, cable glands in cable trench and equipments..

Painting of all structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of paint.

RP INFRAPOWER PVT LTD (BID ID -363211)

RP INFRAPOWER PVT LTD (BID ID -363211)

RP INFRAPOWER PVT LTD (BID ID -363211)