Comprehensive maintenance and Repair/ Replacement to joinery fitting incl periodical services of MDC , 314 fd work shop COY EME , ASRI , 127 TA , SHO(L) under AGE B/R-I of GE Dehradun.

Amount

Taking down chowkhats or frames with shutter n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down Chowkats with shutter exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down shutter of any description, exc. 1 Sqm but n. exe 2 sqm each complete all as specified and directed.

Supply and fix Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: framed filled in cement concrete1:2:4 type B0 ( 12.5 mm stone aggregate) complete all as specified and directed.

Material and labour for Pressed steel frames (size 105-125 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,suplied and fixed, complete, as specified, and directed .Note: framed in filled in cement concrete 1:2:4 type B0 (12.5mm stone agg) complete all as specified and directed.

Supply and fix 35 mm thick second class hard wood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

Supply and fix GI steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

Material and labour for 35mm thick IInd class hard wood plain fancy, framed panelled shutter machine made with panels of timber flat on both sides feather edged supplied and fitted to chowkats complete all as specified and directed.

Supply and fix factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kilogram/Cubic Metre from ISO certified company door should be water proof teRunning Metreite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified.

Supply and fix 24-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kilogram/Cubic Metre. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof,Termite Proof , fire etardant and having screw holding capacity complete all as specified and directed.

Material and labour for 30 mm thick, factory made flush shutters,BWR solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

Supply and fix in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix aluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down old door complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plug width;- 85x44.5x1.20 mm thick Bottom;- 100x44.5x1.20 mm thick Style;- 85x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 150mm Aluminium tower bold 9.9 mm dia shoot 200 mm long Mortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleat aluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed (ii) PCC shall be measured and paid seperatelly Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Supply and fix aluminium window having two / three shutter on which two shutter are glazed and one shutter are gauged including rubbre beeding gasket, locking arragement, jointing clip of all necessary fitment complete all as specified and directed. aluminium sections shall be given below including taking down old window: - Frame;- 122x36x1.2 mm thick fixed with rawal plug Shuter frame;- 59x36 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 100mm Aluminium tower bold 9.9 mm dia shoot 150 mm long Glass;- 5 mm thick frosted/ plain glass ( as directed) wire mesh Stainless steel of 0.063 mm nominal dia wire and average width of arperture 1.40 mm Aluminium stopper cleat aluminium hinges 100 mm long powder coated Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Glass: Saint gobain / Modi guard / Tata

Supply and fix in repairs aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thick Bottuom section;-100x44.5x1.22 mm thick Complete all as specified and directed by the Engr in charge Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed.

Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- foRunning Metreing to Fe.290.Gde-E-165 including necessary welding, drilling hole & including dismantling old section complete all as specified and directed.

Material and labour mild steel plain black sheet 0.8 mm in wall cladding steel gates and similar work cut to size, holes, punched .including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joint complete all as specified and directed

Dismaltling of AC sheeting any type (corrugated/semicorrugated, etc) in roof covering etc complete all as specified and directed.

Dismantling of timber scantlings 40 Sqcm and over in section in any position and in any situation. (unframed work) complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including complete all as specified and as directed.

Material and labour for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Material and labour Rolled sections as in framing or cladding, glazing, door chowkat and the like fixed with angle cleats and connecting plates, etc and either hooks and hinges or steel hanging door complete all as specified and directed.

Supply and fix 100 mm size stainless steel butt hinges 204 grade, and fixed with stainless steel screws, complete all as specified and directed.

Supply and fix 200 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed .

Supply and fix 150 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fix 100 mm size solid in one piece stainless steel handles, in 304 grade and fixed in stainless steel screws all as directed complete all as specified and directed.

Supply and fix stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts,and fixed 250mm long complete all as specified and directed.

Supply and fix floor door stopper of alluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed.

Supply and fix in repair 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

Material and labour for preparation of new/old untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down Aluminium window shutter size exc 1 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the window functional complete all a specified and directed.

Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads .complete all as specified and directed

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm each pane complete all as specified and directed

Supply and fix 4 mm thick transparent acrylic sheet, fixed with silicon sealent in square/rectangular in doors, windows etc complete all as specified and directed

Supply and fix glazing (4.00 mm thick frosted glass) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket and aluminium snap beading etc. complete all as direted.

Supply and fix in repairs window shutters locking Handles with screws etc complete all as direted by Engineer-in-charge .

Supply and fix welding in repairs length exc 2.5 cm but n. exc 5 cm & metal to be welded n.exc 6 mm thick complete all as specified and directed.

Supply and fix in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kilogram and fixed with stainless steel screw complete all as specified and directed.

Supply and fix in repair 1mm wall thickness stainless steel 202 Gde drapery rod with incl brackets, decorative finials at both ends complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down existing tubing complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down existng tubing complete all as specified and directed.

Material and labour 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg) for sub base to receive the screed including demolition of existing concrete complete all as specified and directed.

Material and labour cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick as in plinth protection / path surface finished even and smooth without using extra cement including demolition of existing plinth complete all as specified and directed

Material and labour PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) of any thickness complete all as specified and directed.

Material and labour non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry @ 3 kg / sqm and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of existing tiles complete all as specified and directed

Material and labour Glazed ceramic tiles coloured size of size 450x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry @ 3 kg / sqm and pointed in white cement to match on and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of tiles complete all as specified and directed

Material and labour non-skid / mat finish designed coloured joint free parking ceramic tiles of size not less than 400 mm x 400 mm x 8-10 mm thick in floor, set and jointed in neat cement slurry @ 3 kg / sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and including dismantling of existing tiles complete all as specified and directed.

Material and labour for double Charge Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry @ 3 kg / sqm and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of existing tiles complete all as specified and directed.

Material and labour Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming Running Metreing to IS 15658- 2006 M-35 Grade with grey cement with pigment including demolition of existing floor of any type complete all as specified and as directed .

Material and labour 18-20 mm thick granite ( of any type) (table rubbed and polished ) in steps, jambs,pillars, window-cills, cooking platefoRunning Metre, and like in ceme t mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing items complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed.

Material and labour brick work with sub class ‘B’ bricks old size straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed.

Material and labour brick work with sub class ’B’ bricks old size straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down of cement or cement lime plaster any description from brick or stone wall , ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Material and labour rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement complete all as specified and directed.

Material and labour rendering 15 mm thick cement plaster in CM 1:6 on brick & concrete surfaces and finished even and smooth (without using extra cement) complete all as specified and directed.

Material and labour rendering 15mm thick in cement mortar 1:4 finished fair faces of brick/concrete surfaces even and fair without using extra cement complete all as specified and directed.

Material and labour 10 mm thick plaster in CM (1:3) on fair faces of concrete surfaces ceiling complete all as specified and directed.

Material and labour for, preparation of new /old plastered/un plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

Material and labour for complete removal of old existing treatment of internal or external surfaces of wall complete all as specified and directed.

Material and labour two coat of cement base paint on already prepared surfaces of walls complete all as specified.

Material and labour for applying two coats of oil bound distemper over a coat of putty after preparing the new/ old plaster surface complete all as specified and directed.

Material and labour for two coats of oil bound distemper on new /old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

Material and labour for preparation of wall and applying wall care putty 1 to 1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

Supply and fix in repair galvanised mild steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets. complete all as specified and directed.

Supply and fix 4 mm thick 'E' board (classic) of size 600x600 mm false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E board with ceiling section & perimeter of angle 25x25x0.50 mm thick complete all as specified and directed.

Supply and fix hollow profile PVC Wall panneling consisting of 5mm thick PVC sheet inclusive of solvent and fixing to walls on PVC frame including all fillets as per specifications and drawing complete all as specified and directed.

Cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting n.exc 10 Cm in girth.complete all as specified and directed.

Supply and fix Rotational moulded polyethylene(triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water tank and remove from site complete all as specified and directed.

Supply and fix in repairs heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ilts tank complete all as specified and directed by the Engr-in-Charge.

Supply and fix Rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water tank and remove from site complete all as specified and directed.

Supply and fixing in repair PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix in eposy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

Supply and fix in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat cover white for pedestal pattern complete all as specfied and directed.

Supply and fix in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and directed.

Supply and fix in repair half stall china urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cement and waste pipe etc complete all as specified and directed by Engineer in Charge.

Supply and fix in reapair 75 mm PVC floor trap, spun casted with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) complete all as specified and as directed by the Engr-in-Charge.

Supply and fix in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.

Supply and fix in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and directed.

Supply and fix in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

Supply and fix in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fix in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with hand elbow operated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix in repair stainless steel grating 100 mm dia size complete all as specified and directed.

Material and labour cleaning of water storage tank 500/1000 Ltr capacity mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner complete all as specified and directed.

Supply and fix in repairs 20 mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fix in repair 32 mm dia waste fittings, brass chromium plated for Glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fix in repair bib taps long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore complete all as specified and directed.

Supply and fix in repair CP brass angle cock 15 mm bore complete all as specified and directed.

Supply and fix in repair Plastic Water Closet seat cover ,white, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repair PVC waste pipe flexible type 32 mm dia with coupler complete all as specified and directed .

Supply and fix in repair PVC waste pipe for urinal flexible type with 40 mm dia coupler complete all as specified and directed .

Supply and fix in repair 75 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed.

Supply and fix in repair 110 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed.

Supply and fix UPVC (SWR) bend, 75 mm bore' complete all as specified and directed.

Supply and fix UPVC (SWR) junction single, (Single T) equal or unequal, 75 mm bore with oval access door complete all as specified and directed.

Supply and fix UPVC (SWR) bend, 110 mm bore' complete all as specified and directed.

Supply and fix UPVC (SWR) junction single, (Single T) equal or unequal, 110 mm bore with oval access door complete all as specified and directed.

Complete removal of existing treatement and material and labour for applying 1 mm thick interior grade wall care putty to make the surfaces smooth as specified and directed by Engr-in-Charge.

Material and labour preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of Synthetic enamel Paint complete all as specified and directed.

Material and labour preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed.

Supply and fix in repair 12 mm thick prelaminated particle board exerior grade in bottom panel of existing aluminium door etc rubber gasket, aluminium glazing clips complete all as specified and directed.

Supply and fix in repair CP health faucet with 1.20 mtr metallic expandable tube & hook complete all as specified and directed.

Supply and fix in repair Towel Rail 600mm long of stainless steel grade 304 complete all as specified and directed.

Supply and fix in repairs PVC (SWR) bend of dia 110 mm complete all as specified and directed.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in any type soil complete all as specified and directed.

Material and labour PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed.

Material and labour for 150 mm Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed.

Material and labour for cement concrete bed in 1:3:6 type C-2 for 150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and as directed.

Returning filling in soil including spreading leveling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed.

Material and labour for precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of man hole, septic tank, soak well etc set in cement mortar 1:4 complete all as specified and as directed. Note :- Reinforcement will be measured and paid separately under respective item of sch)

Material and labour for mild steel TMT bars 08 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for coloured pre-polished rubber moulded chequred cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry @3 kg / sqm as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 including demolition of existing floor complete all as specified and as directed.

Material and labour for heavy duty Skid proof vitrified coloured area of each tile not exe 0.18 sqm,10mm thick dark shed exterior grade (square/rectangular) in floor, parking, path etc, jointed in neat cement slurry @3 kg / sqm and pointed in coloured cement to match over and including 15mm thick screed bed in cement morter 1:6 and dismantling of exidting floor tiling including cement morter bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Sqm over a coat of bituminous primer and applying aluminium reflective paint over the surface of APP complete all as specified and directed.

Removing manhole cover and cleaning manholes of any depth any size including taking out accumulated, soil, sludge any material incl both ends and removal to MD lands and manhole cover refixing after cleaning complete all as specified and directed by Engr-in-Charge.

Cleaning of sewage pipe line 150 mm to 200 mm dia pipe by rodding or by bamboo & removing the sludge/waste mtrl and burying the waste material in borrow pits. Note:-(cost of the borrowpit shall be deemed to be included in the quoted rates of this item).

Renewal of soakage well, excavation in any type of soil, foundation PCC 1:3:6, wall of honeycombed , Brick masonary in CM, RCC cover slab size of well 2.40 dia and 3.00m depth , including demolition of existing old unserviceable soakage well and filling soil to match surface with existing ground surface complete all as specified. Note:- the rate of soil for filling in old U/S soakage well is included with this item.

Removing manhole cover and dewatering and desludging of septic septic tank/sokage well of any size and depth by manually/mechanically (solid contents if not removed by mechanically should be removed by manually) and removing the sludge out side of MOD complete all as directed at site. After complete cleaning of septic tank the manhole cover shall be re-fixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specified and directed at site.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as specified and directed.

Material and labour point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including concealed rigid PVC conduit medium grade including accessories incl cutting chases etc along with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch .

Description all as per Item No 125 above but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

Description all as per Item No 125 above but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

Description all as per Item No 125 above but One bell/buzzer point controlled by bell push complete all as specified and directed.

Description all as per Item No 125 above but One light point controlled with switch 2 way complete all as specified and directed.

Description all as per Item No 125 above but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

Material and labour point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in existing steel/PVC conduit with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch.

Description all as per Item No 131 above but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

Description all as per Item No 131 above but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

Description all as per Item No 131 above but One bell/buzzer point controlled by bell push complete all as specified and directed.

Description all as per Item No 131 above but one two way point controlled with switch 2 way complete all as specified and directed.

Description all as per Item No 131 above but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

Supply and fix in repair Switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix in repair Switch piano flush type single pole two way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix in repair Socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified and directed.

Supply and fix in repair bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fixing in repair Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type ISI marked with valid CML No complete all as specified and directed.

Supply and fixing in repair switch piano flush type, single pole, one way, 230 Volts 15/16 Amps marked with valid CML No. complete all as specified and directed.

Supply and fix in repair stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fix in repair anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing in repair ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix in repair calling bell type AC 230 Volt single pole complete all as specified and directed.

Supply and fix in repair LED tube light fitting batten type all in one single phase 18/20 W with lamp 6500/4000 K complete pre-wired all accessories complete all as specified and directed.

Supply and fix in replacement of PVC Exhaust Fan motor of size 300 mm complete all as specified and directed.

Supply and fixing in repair of LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete all as specified and directed.

Material and labour in repair for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 6 Sq mm as current carrying conductor and one run of 6 Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified incl taking down old u/s sub main complete all as specified and directed. Note:- Three runs of wire and one run of pipe shall be measured as one meter only for payment purpose.

Supply and fix in repair Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make

Material and labour in replacement Distribution board TPN DB 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar complete all as specified and directed.

Supply and fix in repair MCCB 415 Volts, 160 Amps, rating 4 Pole (triple pole and neutral), adjustable Thermal Magnetic release (Service Breaking Capacity 16KA (Ics=100%Icu)-05 Nos complete all as specified and directed.

Supply and fix in repair MCB TPN 40 to 63 Amps, 240 Volts having braking capacity 10 KA complete all as specified and directed.

Supply and fix in repair Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection. Note:- DB and MCCB/MCB shall be of same make

Supply and fix in replacement MCB combo box with steel enclosure with one single pole MCB 20 Amp 10 KA C series suitable for AC/geyser etc complete all as specified and directed. Make :- Havells Model cat part No DHDMCSN0151020 or Legrand/C&S/ABB.

Supply and fix in repair SP 6 to 32 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix in repair SPN 25 to 63 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

NOTE:- Amount of credit of Rs. 71905.50 for retrieved materials is mentioned in Schedule of Credit Page No 35 of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S JAI PRAKASH GOEL (BID ID -3155413)

M/S C S AITHANI (BID ID -3154975)

Asian Builder (BID ID -3155345)

PRAGATI ENTERPRISES (BID ID -3154579)

Alankar Traders (BID ID -3155028)

VERDHMAN ASSOCIATES (BID ID -3155450)

R K BUILDERS (BID ID -3151120)