REPAIR / MAINTENANCE OF INTERNAL WIRING EAST SIDE OF LEHL MARG UNDER GE (S) BINNAGURI

Amount

Schedule 'A'

Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

M&L point wiring complete with 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, including cutting chasing in brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.2mm thick of required size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with CM(1:4) with treating the surfaces as per existing finishes complete all as specified and directed for the following are :- (a) One light point controlled by one way switch 5/6 amps.

(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

(c) One socket out let 5/6 amps point on the same board

(d) One socket out let 5/6 amps point on the independent board

(e) One bell/buzzer point controlled by one bell push button

(f) One light point controlled by two two way switch 5/6 amps.

M&L point wiring complete with 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor of size 2.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, including cutting chase in brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 2.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with CM(1:4) with treating the surfaces as per existing finishes for socket outlet on independent board complete all as specified and directed.

M&L point wiring complete with 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including medium grade PVC double lock Casing - Capping and fittings, including cutting chasing in brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.2mm thick of required size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with CM(1:4) with treating the surfaces as per existing finishes complete all as specified and directed for the following are :-. (a) One light point controlled by one way switch 5/6 amps.

(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

(c) One socket out let 5/6 amps point on the same board

(d) One socket out let 5/6 amps point on the independent board

(e) One bell/buzzer point controlled by one bell push button

(f) One light point controlled by two two way switch 5/6 amps.

M&L point wiring complete with 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor of size 2.50 sqmm nominal cross sectional area single core drawn in and including medium grade PVC double lock Casing - Capping and fittings, including cutting chasing in brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.2mm thick of required size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 2.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with CM(1:4) with treating the surfaces as per existing finishes complete all as specified and directed.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.

S&F switch piano flush type 5/6 amps single pole two way complete all as specified and directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.

S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed.

S&F Switch socket combination 2 in 1, 5A, multipin, flush type complete all as specified and directed.

S&F Switch socket combination 3 pin 16A, multi pin, flush type complete all as specified and directed.

S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.

S&F bell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified and directed.

S&F of call bell ding dong type AC Single pole 220/240 Volts, surface type complete all as specified and directed.

S&F Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed.

S & F lamp holder, isolated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.

S & F modular switch 1 way 6A, 1 module single pole complete all as specified and directed.

S&F modular socket 2/3 Pin combined 2 module, 6 amps complete all as specified and directed.

S&F modular socket 2/3 Pin combined 2 module, 6/16 amps complete all as specified and directed.

S&F modular Switch 1 way 16A, 1 module single pole complete all as specified and directed.

S&F modular fan step regulator 120W, 2 module complete all as specified and directed.

S&F modular bell push 6 amp, 1 module complete all as specified and directed.

S&F modular Switch 2 way 16A, 1 module single pole complete all as specified and directed.

S&F modular white cover plate with frame 1 module complete all as specified and directed.

S&F modular white cover plate with frame 3 module complete all as specified and directed.

S&F modular white cover plate with frame 6 module complete all as specified and directed.

S&F modular white cover plate with frame 8 module complete all as specified and directed.

S&F modular white cover plate with frame 12 module complete all as specified and directed.

S&F in repair surface & wall mounted 20 watt LED batten light fittings with extruded Aluminium housing complete with constant current electronc driver all accessories including with 02 Nos of PVC round /square blocks screw. provision of three core PVC cable of copper conductor and making connection complete all as specified and directed.

S&F (in replacement) LED street light fitting ,system wattage-40 Watt, energy saving and environmental friendly made up of pressure die cast aluminium housing with high power LED as lighting sources and lens embedded PC cover having TOP opening seprate driver with IP- 66 Protection and immpact resistant of IK07 and connecting the street light fitting using 2.5 Sqmm PVC insulated three core copper cable including taking down all as specified and directed.

Supply and fixing LED light fitting mirror type with high with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F in repair decorative luminare suitable for wall light fixture including LED lamp 1 X 10 watt (B-22 base) made of unbreakable poly carbonate with acrylic decorative diffuser, IP-65 protection using 1.5 Sqmm PVC insulated copper cable including taking down all as specified and directed.

S&F in repair 10 watt LED Bulkhead light fittings complete with aluminium Alloy grey powder coated housing, Heat resistant prismatic Glass cover with EPDM rubber linning,constant current electronc driver all accessories including provision of three core PVC cable of copper conductor of size 23/.0076 and making connection complete all as specified and directed.

Supply and Fixing in repair MCB DB double door, powder coated sheet metal enclosure, 8 way 240 volts grade single pole and neutral with 200 amps rated bus bar, fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed.

Supply and Fixing in repair MCB DB double door, powder coated sheet metal enclosure, 4 way 240 volts grade Triple pole and neutral with 200 amps rated bus bar, fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed.

S&F in repair MCB (isolator) triple pole & neutral 40 amps, 415 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F in repair MCB single pole & neutral 6 to 32 amps, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F in repair MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S & F Moulded Case Circuit Breaker (MCCB) FP with adjustable thermal fixed magnet release, capacity 100 Amps,, line load independability, with horizontal mounting facility , 415 , 50 Hz , 10 KA, including making necessary connection with spreader, link and copper lugs including taking down old unserviceable MCCB /Main switch of any capacity and make from position complete all as specified and directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. all as pecified and as directed

Material and labour for earthing with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron wire 4mm dia earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth strip protected by and including PCC (1:2:4) type B1 precast RCC cover slab (M-15) reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 2009 and testing on completion complete including dismantling the existing unserviceable earthing complete all as specified and as directed.

M&L for sub main wiring concealed type with two run of single core PVC with of single core PVC insulated unseated cable with 4.0 sqmm (nominal cross-section area) multistranded copper conductor FRLSH cable 1100 volt grade incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 2.5 sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25mm dia medium grade, making good the disturbed surface complete all as specified. Note- Two run of sub main wiring cable alongwith 25mm PVC conduit pipe shalll be measures as one unit length

M&L for sub main wiring concealed type with two run of single core PVC with of single core PVC insulated unseated cable with 6.0 sqmm (nominal cross-section area) multistranded copper conductor FRLSH cable 1100 volt grade incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25mm dia medium grade, making good the disturbed surface complete all as specified. Note- Two run of sub main wiring cable alongwith 25mm PVC conduit pipe shalll be measures as one unit length

M & L in repair for security light bracket made out of GI pipe light grade 32 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified & directed.

Fixing in repair PVC Insulated screened XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqm 4 core providing lugs, straight through joints as required complete including jointing material as required and making connection of LT cables , including dismantling & taking out defective LT under ground PVC cable from trenches, cutting and removing defective parts complete all as specified and directed.:- Note:- Excavation & earthwork,sand cushoining,brick protection & GI pipe shall measured and paid separately,

Excavation in trenches not exc 1.5 Mtr wide and n.exc 1.5 mtr in depth, getting out for electric cable complete in any type of soil complete all as specified and directed.

Returning, filling in, soil obtained from excavation including spreading, levelling and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting point complete all as specified and directed.

M & L for sand cushioning with river Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable punned to a thickness of 18 cm) complete all as specified and directed.

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

M&L (in replacement) for GI tubing 40 mm bore ,light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified and directed.

Supply and fix suspended architectural 20W LED lumimiare provides soft-light and glare free symmetrical illumination (with continous mounting and cap) including provision of three core PVC cable of copper conductor of size 23/.0076 and making connection complete all as specified and directed.

Taking down ceiling fan/exhaust fan sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

M & L for painting of ceiling fan of any make/ model and size complete with one coat of 1st grade quality of synthetic white enamelled paint by spraying including preparation of old painted surface to remove all dust, oil mark etc and filling cavties with filter materials, before painting, complete writing the MES numbers on ceiling fan with flack synthetic enamel paint of 1st grade quality by stenciling with uniform size of letters/ of figures n.exc 20 mm in height letters/ figures to be written in each fan complete all as specified and directed.

M & L for rewinding of coils of ceiling fans 1200 / 1400 mm sweep of any make and sweep by using super enamelled copper wire as per existing gauge and approved quality including heat varnishing drying up overhauling and testing complete all as specified and as directed.

M & L for rewinding of coils of exhaust fans 300 to 380mm sweep of any make and sweep by using super enamelled copper wire as per existing gauge and approved quality including heat varnishing drying up overhauling and testing complete all as specified and as directed.

Supply only parts /components of ceiling fan as per existing make and size complete all as specifed and as directed (a) Gun metal bush metal bush of any size.

(b )Ball bearing No 6201/6202

(c) Paper condenser 2.5 MFD

(d) Connector bakelite two terminal each end

(e) Rubber bush with MS bolt and nut

(f) PVC canopy for ceiling fan

Supply only parts /components of exhaust fan as per existing make and size complete all as specifed and as directed. (a) Gun metal bush metal bush of any size.

(b )Ball bearing No 6204/6203

(c) Paper condenser 2.5 MFD

(d) Set of exhaust fan blades with screws (Set of three blades)

M & L in replacement for down rod of 30cm height fabricated out of MS pipe 12mm dia heavy duty duly painted with white paint suitable to ceiling fan of any description , make , brand and model after taking down old existing unserviceable down rod complete all as specifed and as directed.

M & L in replacement for MS louvers with nuts, bolts and washers suitable to exhaust fan 300 to 450mm sweep of any description make and model after taking down old existing unserviceable PVC MS louvers complete all as specifed and as directed.

M & L in replacement for standard MS clamps with rubber shoe with bolts suitable to exhaust fan of anydescription, make and model after taking down old existing unserviceable clamps complete all as directed.

Supply fix in repairs blade set (set of three blades)1200/1400 mm sweep as per existing make and size all as specified and directed.

hanging only ceiling fan and connecting up including provision of flexible cable from ceiling rose or connector to fan complete all as specifed and as directed.

Taking out sheet metal enclosure of 12/8/6/4/2 way DBs from its original position and refixing after the B/R work at same position complete all as specifed and as directed.

PULAK SAHA

Shri Amarnath Sah

M/S. JAGDISH PRASAD AGARWALA

samrat saw mill and joinery workshop

M/S East India Traders

BHANU GAJMER

M/S MOHAN KUMAR BANSAL

S.N. GHOSH AND CO.