GI ROOF SHED

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m. dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/304 MORTH

Collection supply and filling of Stone crusher dust finer than 3mm with not more than 10% 4 passing 0.075 sieve including cost and conveyance of all materials, labour charges, watering and compacting etc complete as per ss under bed concrete

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm nominal size Graded hard stone aggregate mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications MORTH

Masonry work in CM (16) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and 8 stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc, cpomplete with a compresive streangth not lessthan 50 kg/sqm for walls for Superstructure Walls.

Manufacture, supply, delivery and fixing of Heavy Steel works like Trusses, Stanchions, Heavy Beams and Girders made with MS Structural Steel, ie Angles, Channels & I Sections etc including welding, finishing, applying red oxide paint as primary coat etc complete unit 100 kgs

Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating Alu-Zinc coating AZ150 GSM. Tensile Strength. 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width 1020, Length Maximum 12 Meters with Regular Range Colours 10 Sqm.

Flooring with Plain Cement concrete (1:4:8) using 40 mm metal 100mm thick and plastered over with 12mm thick in CM (1:3) including cost and convayance of all materials, labour charges, machine mixing and curing charges etc. complete as per S.S.

Plastering with CM (1:4), 20 mm thick including cost & conveyance of all materials and labour charges curing etr complete

Plasteing with CM (1:4), 12 mm thick including Cost & Conveyance of all materials and labour charges for mixing and curing etc. Complete as per S.S

Paunting new walls with 2 coats of plastic emulsion paint of approved brand and shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, inlcuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc complete for finished item of work as per SS 911 for Internal walls

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after chouroughly brushing the surface to remove all dirt and remains of loose powdered materials, 16 mlnuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc complete for finished item of work as per SS 911 for External walls.

Painting to new iron work with synthetic enamel paint two coats over pirmary coat with red oxide paint including cost and convevance of all materials and labour charges etc complete

Door Frame section of 45x75 MM The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Providing and fixing 28 30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Suapplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows three track two glass shutters sliding and one mesh shutter duly manufactured using UPVC reinforced profiles of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.0 mm for outer frames. (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 12 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 215 mm) x 2 mm fitted with nylon/ polymer mesh on rollers/accessories like pulley duly fixed with TPV Gaskets/ EPDM weathering seal resistant locking system 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant easy glazing/ deglazing at site etc and conveyance of all materials. accessories, labour charges erection at site with templates for casement sizing complete for finished item of work including cost for transportation, erection at site with templates for casement sizing complete for finishing item of work.

Provision for Electrical Works, including necessary conduits, sleeves, openings, junction boxes, cable routes, supports, earthing provisions, and other requirements for future installation of electrical systems, complete as directed by the Engineer-in-Charge.