Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC | ₹4.0 L | L1 | Accepted-AOC Low quoted amount |
| 2 | L2₹4.9 LRejected-Finance | ₹4.9 L | L2 | Rejected-Finance High quoted |
| Sl No | Description | Qty | Unit | PRAJOSH L1 | UDAYAKUMAR N L2 |
|---|---|---|---|---|---|
| 1.00BUILDING | |||||
| 1.00 | 25.1:Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminum extruded section shall be taken for purpose of payment | 103.74 | kg | 680 ₹70,543.88 | 750 ₹77,805.75 |
| 1.00 | 50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) | 109.2 | sqm | 680 ₹74,256 | 750 ₹81,900 |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 18.36 | kg | 680 ₹12,484.80 | 850 ₹15,606 |
| 1.00 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 35.46 | kg | 680 ₹24,112.80 | 750 ₹26,595 |
| 1.00 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 17.61 | sqm | 1,250 ₹22,012.50 | 1,500 ₹26,415 |
| 1.01 | OD313747/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 42 | sqm | 580 ₹24,360 | 700 ₹29,400 |
| 1.01 | 10.29.1:Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides | 19.94 | sqm | 1,000 ₹19,940 | 1,300 ₹25,922 |
| 1.01 | OD305424/2025-2026:Applying anticorrosive agent two component Zera zinc ZR or equivalent product to the existing and new bars after clearing them etc as per technical specification. | 1 | 1 sqm | 1,000 ₹1,000 | 1,300 ₹1,300 |
| 1.01 | OD305423/2025-2026:Treatment to mildly affected beams/columns(prior to encasing).Providing and applying fiber reinforced repair mortar Master Emaco S348 BY BASF OR EQUIVALENT AS PER manufacture specification after chipping loose concrete/cleaning applying anti corrosive agent on reinforcement steel using Master Emaco P130-BASF or equivalent. All complete as per instruction of engineer in charge. | 2.64 | sqm | 1,000 ₹2,640 | 1,200 ₹3,168 |
Tender Value
₹4.6 L
EMD Value
₹10,566
Closing Date
29 Oct 2025, 6:00 pmClosed
ASSISTANT ENGINEER
OFFICE OF THE ASST EXECUTIVE ENGINEER THUNERI BLOCK PANCHAYATH
THUNERI BP ANNUAL PLAN - Saksharatha Bhavan kheeravikasana office maintenancerecast
2025_LSGD_812896_9
AE/02/2025-TBP
Open Tender
Civil Works - Others
180 days
Thuneri
Please refer Tender documents.
9 documents required · 9 mandatory
₹935
Yes
₹10,566
Yes
20 Feb 2026
22 Oct 2025
31 Oct 2025
22 Oct 2025
29 Oct 2025
22 Oct 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1358824.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
BOQ_1358824.xls
BOQ • 0.31 MB
NIT.pdf
Tender Documents • 0.03 MB
SBD.pdf
Tender Documents • 1.78 MB
Download all tender documents and submit your bid