19. Road construction using DENSE (Dense Bituminous Macadam) and installation of interlocking tiles on the side berms, from NH-58 to the Primary School on Dayampur Main Road.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density..As per Reference to MORT&H Specification 406 SN. 4.14 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.As per Reference to MORT&H Specification 502 SN. 5.10Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing and laying dense graded bituminous macadam (gr-2) with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification complete in all respects.As per Reference to MORT&H Specification 505 SN. 5.4 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sam on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification complete in all respectsAs per Reference to MORT&H Specification 507 SN. 5.5 Rates are including all labour, material, T&P, taxes & labour cess but excluding GST

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Reflective Raised Pavement Marker wiih shanks Providing and fixing of raised pavement markers with shanks of adequate length anchored with epoxy/ bitumen'adhesive ofapproved make(Cat Eye) Type x-ASTMD-4956 04 Avery Dennision/3m(UsA Make) having moulded body ot polycarbonate, ASA, HIPS or ABS able io support a load of 13.635 M.T. tested in accordance wilh ASTI\,4D 4280 type H and oiher fequirement mentioned in MoRT&H Circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronicatty welded io the body. The length, height and width of the body shatt not exceed 130 mm, 20 mm and 105 mm .espectively, The area of each feflective surface shall not be less than 13 Sq. cm . on each side stoping al the angle of 35 + 5 degree lo the base to ensu malimum retlectively. it shallcomply lo specifiualion o!Category A ot t\,loRT&H circular no. RW/NH 3302311o197-Da-ll daied 11.06.97 lenses shall be moutded of methyl melhecrylale conform ng ro AST[,1D 788 or equivalem. With 7 years warranty. Rale shall be inclusive of all taxes, royalty, eic. etc. Atl T&P/ machine matefialand labouf required fof proper com Dletion of work. Note : The Composite warranty .iointly signed by original manufacturer & authorized converter of at least 7 years shatl be

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level level1:2:4 (1 Cement : 2 coarse sand (zone-ill) derived from natural sources : 4 graded stone aggregate 40 mmnominal size derived from natural sources)