Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹8.1 L
EMD Value
₹16,200
Closing Date
19 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer and Director General, IMTI
IMTI Kota
Electrical Work
2022_WRDAS_309445_1
NIT No 04 of 2022-23
Open Tender
Civil Works
Percentage
365 days
Kota
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
500 CEandDG IMTI, Kota 500 MD RISL Jaipur
₹16,200
20 Dec 2022
9 Dec 2022
20 Dec 2022
9 Dec 2022
19 Dec 2022
9 Dec 2022
Amount
Providing continental design (knife type of any other type HRC fuse links 80 KA rupturing capacity 415 V on existing fuse etc. of the following rating.
Providing PVC casing
20mmx12mm G-2
25mmX12mm G-2
Providing PVC conduit pipe
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conducted 1.1 KV grade and 1.5sq.. mm nominal sixe FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS:694) of approved make in surface/ recessed ISI marked MMS (IS:9537 P-III) PVC conduit & it’s accessories, terminal screwless cage connectors for natural looping in switch board & false ceiling point, 6 A switch , 3.0 mm thick ISI marked phenolic laminated sheet zinc plated / brass screws, cup washers, making connections, testing etc. as required. G-1
Short point upto 3 mtr.
Medium point upto 6 mtr.
Long point upto 10 mtr.
Providing 240/415 V 10 KA breaking capacity AC MCBs on existing board/sheets including making connections etc. as required seimans/Havells
Single Pole MCB
6 A to 32 A rating
40 A rating
50/63 A rating
TriPLE pole & Neutral MCB
6 A to 32 A rating
40 A rating
50-63 A rating
Providing double Pole isolator. of rating
30/40 A make Havells/siemens
Providing residual current operated earth leakage circuit breakers 100x30 MA sensitivity including making connection and testing etc. as required of rating 63 A
Seimens / ISI mark 4 pole
Providing 6 amp. Flush type switch IS 3854 marked including cutting hole in tile and making connection as required (Anchor/SSK/SK/555) as approved.G-1
Providing 16 amp switch IS 3584 (Anchor/SSK/SK/555)G-1
Providing Bell push flush type IS 3854 in position including cutting hole in sheet and making connection as required (Anchor/SSK/SK/555) as approved.
Providing 3/6 pin socket IS 1293 (Anchor/SSK/SK/555)
Providing 3/6 pin 16 MP socket IS 1293 (Anchor/SSK/SK/555)
Providing Ceiling rose IS:371 (Anchor/SSK/SK/555)
Providing bakelite batten/angle pendant holder ISI in position including making connection as required (Anchor/SSK/SK/555) as approved.
Providing ceiling fan regulator five step
(i) 5 step Fan regulator 100wt. 2 Module
(ii) 5 step fan regulator 100 wt 1 Module
Providing of ISI marked (IS:2268-1994) single / multi tone electronic call bell as per PWD specification for electrical Works, including making connection testing etc. as required.
Providing (Anchor/SSK/SK/555) as approved. G-1
Providing of office one module call bell system comprising of indicator as per PWD specification for electrical Works, push to reset switch housed in pvc/metallic sheet including making connection testing etc. (Anchor/SSK/SK/555) as approved. G-1
Providing Flush / surface type Buzzer G-1
Providing TP&N 415 V AC-23 A front handle operated switch disconnector fuse unit, cubical type, without metallic enclosure ,conforming to IS:13947 P-III in existing panel (W/O HBC fuses) including making connection with lugs, testing etc. as required.
250 A Rating
SITC of Quick Make and quick break 3 pole current limiting MCB having following current rating upto 100A,10KA,fixed O/L & S/C setting G1 make Havells.g-1
Providing insultated DMC fuse bases suitable for Din type HBC fule links conforming to IS;9224-79 including making connection with lugs, testing etc. as required.
Providing 240/415 V porcelain kitkat fuse (HBC type) conforming to IS:2086, 1983 on existing board/sheet including making connection with lugs, testing etc. as required. G-1
Providing PVC/XLPE insulated & PVC sheathed cable of 1.1 K.V. grade with aluminum conductor of IS 1554 P-1 of Group-1 & approved make including excavation of 30 cm x 75 cm size trenches, as per IS:1255, 25 cm thick under layer of sand IInd classes. Brick thick covering, refilling earth in the remaining portion, making necessary connections including testing etc. as per required of size make Havells
a) 2.5 sqmm. 2 core armoured
b) 4 sqmm. 4 core. armoured
c) 6 sqmm. 4 core.armoured
d) 10 sqmm. 4 core.armoured
e) 16 sqmm. 4 core.armoured
f) 25 sqmm. 4 core.armoured
g) 35sqmm. 3.5 core armoured
h) 50 sqmm. 3.5 core armoured
i) 70 sqmm. 3.5 core armoured
j) 120 sqmm. 3.5 core.armoured
Providing PVC/ XLP insulated and PVC shitted cable of 1.1 KB grade with copper conductor of Group-1 of approved make in ground including excavation of 30Cm x75cm size trench, 25cm thick under layer of sand, IInd class bricks covering, refilling of earth, compaction of earth, making necessary connection, testing etc. as required of size armoured
1.5 sqm 2core
2.5 sqm 2 core
2.5 sqm 3 core
4 sqm 2 core
4 sqm 3 core
6 sqm 4 core
10 sqm 4 core
Supply of FR PVC insulated & unsheathed flexible copper conductor ISI marked of 1.1 KV grade and approved make Group-1
1x1.5 sqmm.
1x2.5 sqmm.
1x4 sqmm
2x4 sqmm. G-1
Providing ISI marked PVC insulated submersible cable with flexible copper conductor including making connection etc.
2.5 sqmm 3 core flat / round
4 sqmm 3 core flat / round
6 sqmm 3 core flat / round
Providing 2core aluminum cable (vimal, anchor, havells)armoured.
SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push (test ) to trip , including making connections with lugs & spreaders, etc. as required.
With Thermal Magnetic release
up to 125 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
250 Amp , 35 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
Providing double ball bearing capacitor start, aluminum body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sqmm pvc insulated flexible copper conductor making connection testing etc. as required Group-1
a) 1200 mm sweep
b) 1400 mm sweep
Providing heavy duty capacitor start, double ball bearing 900/1400 RPM single phase ISI marked exhaust fan in existing opening including making connection testing as required. Group- 2
a. 300 mm sweep (900/1400 RPM)
Providing of stem type ISI marked (IS 3017 / 85) snap action adjustable thermostat storage water heater including making onnection testing etc.
Providing of stem type, ISI marked, push to reset type auto thermal cut off and rated at 20 A 250 V including testing etc. complete in all respect.
Providing of ISI marked ( IS:4159) marked copper sheathed,nickle plated, mineral filled heating element including making onnection testing etc complete in all respect. for storage water heater of any size vertical horizontal; complete as required.
Providing Geyser Safety valve G-2Providing & Fixing of inlet socket with built in safety valve as required complete in all respect.
40 W Tube light set with choke & tube
1x36 wt. With EB G-1
PCB (Printed Circuit Board reparing Air Conditioner 1.5 & 2 tr (Electronic Items)
Providing fluorescent type tube light rod in existing fixture 36/40 watt Crompton / Bajaj
Providing ballast for fluorescent tube light fixture Aluminum wound 18/36 watt. Crompton / Bajaj
1. Electronic
2. Copper
Providing capacitor suitable for 20/40 watt. Fluorescent tube light fixture Crompton/Bajaj.
Providing starters 20/40, 65, 80 W suitable for fluorescent tube light fixture Crompton / Bajaj.
Providing high pressure mercury sodium vapour lamps in position including all necessary T&P etc. as required Sodium Vapour lamps 250 W (Wipro/ Bajaj/ Crompton).
Providing Halogen tube lamp
500 W (Wipro/Bajaj/Crompton)
Rewinding of ceiling fan motor (starting and running winding) including all necessary material. The motor is to be wound taking the number of coils, terms and pitch as it was originally wound, with required size super enameled wire with ‘E’ class insulation material and making connections etc. as required.
900 /1200 mm Sweep motor
Charges for oiling greasing and overhauling of ceiling fan, table fan, pedestal fan and cooler pump irrespect to the size of fan including removing and refixing of fan from site and connection as required.
Oiling, Greasing, Overhauling
Providing and Replacement of ball bearing including removing and refixing of ceiling fan, irrespective of size of fan with all necessary T&P and cost of ball bearing SKF/NBC.
Providing and Replacement of gun metal bush including removing and refixing of fan irrespect of size of Ceiling fan/ Exhaust fan.
Servicing and overhauling of 20 “-25" sweep Desert cooler including oiling greasing, painting of tank from inside with rubber paint after properly dismantling is each assembly and reaffixing and same as required
Painting of desert cooler with two coats of rubber paint inside of water tank and two coat of synthetic enameled paint on both side of cooler body, fan body, grills etc. after clearing with sand paper, complete in all respects as required
Supplying shaft in fan motor of Room Cooler / Desert cooler of any make.
Cooler Fan shaft/Exhaust fan shaft.
Providing ISI marked commercial plywood 4.0 mm thick incl. cutting ,hardware etc as required.
Replacement of cooler pads (heavy) set of 3 no. of size 25" x 27"
Replacement of desert cooler pads (heavy) for different size of cooler (6' pads)
Providing aluminiun blade for 20'' desert cooler fan as required.
P & replacement of high quality pvc distribution ' T 'and 3 no. elbow for cooler
Servicing of 1.0/1.5/2.0 TR capacity Air Conditioner after dis mantling .
P of starting relay of AC/water cooler/fridge compressor as required.
Providing & Replacement of 4 Nos Supporting legs of 20 inches fan motor with rubber pads of desert cooler as required
Replacement of PVC distributors
Providing Desert cooler submersible pump suitable for 18/24" desert cooler
Providing Desert cooler submersible pump suitable for 36" desert cooler
P/S of Cooler fan suitable for full size cooler body of approved quality ISI marked with all accessories complete in all respect of size–20” Make-G.E.C./Crompton/Bajaj/Khaitan/ SummerKing.
Rewinding of single phase motor of 1400 RPM including all necessary material and of the same characteristics as original with required size of super enamelled wire 'E' class insulation material and testing etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be etained by the contractor.
Rewinding of motor of desert cooler fan with super enamelled copper wire, 'E ' class insulation material including removing,refixing,testing etc. as required.
Cooler fan Motor
Rewinding of cooler exhaust Fan motor of any make with super enameled copper wire ‘E’ class insulation material as per original characteristics : 457 mm sweep
Cooler exhaust fan Motor
Supplying and charging of fresh refrigerant and testing of performance of AC / Water cooler of following capacity & strainer filter
1 1.5 TR window/split AC
2 2.0 TR window/split AC
3 80 ltr water cooler
4 120 LTR water cooler
providing brass float valve of weighing approx 250 gm, 8" long rode, PVC ball of 4" dia. For desert cooler
Replacement of defective compressor by company required compressor of AC / water cooler including testing
(Kirlosker/Shriram/ Voltas)
3 80 ltr water cooler
4 120 ltr water cooler
Providing of condensing/ cooling coil of copper fins for following capacity AC/ water cooler
3 80 ltr water cooler
4 120 ltr water cooler
P/Condenser Ceiling fan 2.5 mfd.
Cooler fan 4.0 mfd.
for AC 6.0 mfd
Providing 10 mm thick wood board size
1. 150 mm x 75 mm
2. 100 mm x 100 mm
3. 100 mm x 175 mm
4. 200 mm x 250 mm
5. 250 mm x 300 mm
6. 300 mm x 375 mm
Providing of 5 star rated vertical storage heater with outer casing made of MS Sheet….including making inlet,outlet heavy gauge CP/flexible alloy connection, testing etc as required G-1 Bajaj ,Crompton 10 LTR capacity
15 LTR cap G-1
Providing Energy efficient direct ft.(Ratrofit) composite compact fluorescent lamp of energy saving labeling not less than 3 start and PF 0.8 in existing holder/fixture as required.
Providing experienced and Highly skilled/skilled/ semi-skilled/Un Skilled labour for electric repair/ maintenance / operation of Air conditioning/Air cooling/Fire fighting/Lift/DG set/CCTV/EPABX or any other electromechanical systems as per requirement till completion of maintenance work / repair of fault in IMTI Campus including tracing out all types of faults in electric cables starting from Distribution board near main equipment room to end / user point / equipment and removing of fault in minimum time including road light, cable, LT lines,. They may also be called in off hours in Holiday / emergency / if required.
1. Electrician Gr.I (experienced)
Plate Earthing as per IS:3043 with G.I Earth plate of size 600mmx600mmx6.0mm by embodying 3 to 4 mtr. Below the ground level with 25 mm dia. G.I.’B’ class watering pipe including all accessories like nut, bolts, reduce, nipple, wire meshed funnel and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. frame of size 300mmx 300mm complete with alternate layers of salt and coke/ charcoal, testing of earth resistance as required.
Plate Earthing as per IS:3043 with copper plate of size 600mmx600mmx6.0mm by embodying 3 to 4 mtr. Below the ground level with 25 mm dia. G.I.’B’ class watering pipe including all accessories like nut, bolts, reduce, nipple, wire meshed funnel and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. frame of size 300mmx 300mm complete with alternate layers of salt and coke/ charcoal, testing of earth resistance as required
Providing of modular type switch/ bell push duly ISI marked (IS :3854) as per PWD specification for electrical Works,
6 A one way switch
16 Amp. 1 Module switch with Led Indicator
Providing of modular type lockable feature socket duly ISI marked (IS :1293) as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals
6 A 3 pin shuttered socket
16 A pin shuttered socket
Providing of following modular accessories as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals
Modular MCB 6 A to 32 A DP (IS:8832 marked)
Providing of following size mounting grid plates with cover plates as per PWD specification for electrical Works, made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.
1/2 Module
3 Module
4 Module
6 Module
8 Module
12 Module
Providing of IP20 SMD Mid Power LED batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , Power Consumption of 18W/20W ,
4' LED tube shape fixture 18/20 W (Extruded AI Base)
Providing of following size polycarbonate modular boxes as per PWD specification for electrical Works, as per IS 14772-2000 in recess/ surface suitable for modular accessories as required.
1-2-3 Module
4-5 Module
6-8 Module
10-12 Module
Providing of ISI marked (IS:1293) 6 amp unbreakable 3 pin plug top with lamp indicator as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal including making connection testing etc. as required.
Providing of ISI marked (IS:1293) 16 amp unbreakable 3 pin plug top with lamp indicator as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal including making connection testing etc. as required.
Supplying of capacitor of 230V/ 275V, 50Hz rating of plastic casing and terminals -Lugs or copper wire.
40-60 micro farad
Dismentling of split air conditioner of any capacity/any type including existing indoor unit & outdoor unit , refrigerant piping , connecting cables , drain pipe etc. including shifting of dismentaled material to store complete as required
installation of window/split air conditioner of any capacity/any type including indoor unit & outdoor unit , refrigerant piping , connecting cables , drain pipe etc. including shifting of dismentaled material from store complete as required
Providing IK07 IP 66 procted LED Street light luminaire on existing bracket/pole. The system level luminaire efficacy>=120Im/wt with high power LED is to be used and potted driver must be potted & has a unique BIS R number with input voltage AC 120 to 270 V AC. Input frequency 50Hz+-3% power factor>0.95 driver Efficiency>85%, THD(I).The liminaire shall be BIS certified. Life expectancy equal or more than 50000 burning hrs. Fixture -LED street light fixture 45 watt.
Providing Adjustable M.S grill 20/22 gauge of size approx. 24"x26" including painting etc as required
Providing of IP40 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Back lit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% and in compliance to IEC standards.
Recessed mounting
LED Downlight 2/3 watt.
LED Downlight 6/7 watt.
LED Downlight 9/10 watt.
LED Downlight 14/15 watt.
LED Downlight 18/20 watt.
M.K. ENTERPRISES
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .