Repair to internal water supply cleaning of water tanks and other connected items at domestic area under AGE BR-II GE AF No 2 Jodhpur

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.

M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified.

Taking down chowkats or frame with shutter (without taking off shutters from the frames) n exc 1.5 Sqm complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm & n exc 2 sqm each and refixing in Same opening after doing suitable repairing hinges etc or as directed by Engr-In-charge

M&L for light coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not less than 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6.

All as per item No. 5.00 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6

M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified.

S&F in repairs vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm including flush pipe , PVC P-trap and PCC for fixing complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm.

S & F in repairs brass waste coupling of 32 mm dia for WHB all as specified and as directed

S & F PVC waste pipe 32mm bore of suitable length for WHB/Urinsl/sink complete all as specified and as directed

S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified.

S&F in repair CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified

S&F in repair CP grating 100 mm dia all as specified and as directed.

S&F Single mirror bath room cabinet moulded body and frame (made of strong and fine quality A.B.S plastic) with hinged door (size 16"x12"6") white/ivory in colour.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm.

S & F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F in repair stop/gate valves/angle valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle for 15mm bore.

S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F in repair 15mm Pillar taps cast copper alloy, capstan heads CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F in repair Brass chromium plated shower rose 125mm size with arm

Dismantling of existing water tank (PVC/RCC/AC) exc 250 ltr but n exc 500 ltr capcity and removing from site complete as directed by Engr -in-charge.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.

Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as directed by Engr -in-charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia and complete all as specified and directed by Engr-in-Charge.

S&F 75 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) door bends 75mm dia with access door and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm with acess door and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal and complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) door bends 110 mm dia with acess door and complete all as specified and directed by Engr-in-Charge.

S&F 110 mm dia PVC WC connector with lip ring complete all as specified and directed by Engr-in-Charge.

Resecuring or easing & adjusting without taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each and complete all as specified and directed by Engr-in-Charge.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed by Engr-in-Charge.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars complete all as specified and directed by Engr-in-Charge.

S&F framed work such as grills gratings etc with ends of bars shoulders and/or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar works conforming to Fe 290 gde E-165.

S&F galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint and complete.

S&F in repairs stainless steel curatin rod , having outer dia 28 mm including stainless steel fixing brackets all as directed by Engineer-in-Charge.

S&F in repairs Stainless Steel cap for curtain rod for 28mm dia curtain rod as directed by Engineer-in-Charge.

S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge

S&F in repairs floor door stopper, with 150 mm long, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor.

S&F in solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors all as directed by Engineer-in-Charge.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified.

Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 250 liters and not exc. 500 liters complete all as specified and as directed.

Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 500 liters and not exc. 1000 liters complete all as specified and as directed.

S&F in repairs for center hole basin mixer without popup waste system and complete all as directed by Engr-in-charge

S&F in repairs for sink mixer with regular spout w/m and complete all as directed by Engr-in-charge

S&F in repairs for wall mixer with bend, and complete all as directed by Engr-in-charge

S&F in repairs brass chromium plated health faucet of 15 mm bore complete.

Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface (Soft/loose soil) complete all as specified and directed by Engr-in-Charge.

M&L for mild steel misc works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

M&L for cement concrete type C-2, 1:3:6 using 40mm graded aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut (dia of neck 10mm and 50mm long) complete all as specified and directed by Engr-in-Charge.

Supply only chain link MS Galvanised fencing wire Mesh size 100mm X 100mm made into mattresses laped wired laid in postion all as complete all as specified and directed by Engr-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wire any size or type weight n exc 4 Kg per Sqm as approved by Engineer-in-Charge.

Supply only for mild steel bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthatic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

S&F in repair razor type concertina coil hot galvanised spring tensile wire fixed on Y shape angle iron having barbed wire and coil having 6 to 8 RM per coil of 900 mm dia complete all as specified & as directed. Note : Minimum weight of coil shall be measured by a BOO conveyed by the Accepting Officer.

Dismantling of existing treatment of roof surface and Wire brushing , cleaning top surfaces of tarrace or cement concrete including flashing and junction of parapets complete all as specified and directed by Engr-in-Charge.

M&L 10 mm thick plaster with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement. Water proofing compound shall be measured and paid seperately & complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete B-1. 1:2:4 (20mm graded aggregate) in padding finishing surface of concrete topping even and fair without using extra cement all as specified of average thickness 50 mm in slop 1:40 over roof & complete all as specified and directed by Engr-in-Charge.

M&L APP modified membrane minimum weighting 3 Kg/Sqm with polyester nonwoven polyester reinforcement ( weight not less than 150 gms/sqm )shall be laid by torch application method and overlapped by 100 mm in all sides as directed by Engr-in-Charge

M/S MAJISA CONSTRUCTIONS