Providing, Supplying and fixing new MS Grill As Per Design Given and repairing, replacing M.S Structural parts of existing grill and other necessary work at Diff.ward of Dyce-3 of West Zone (ARC) (Re-Tender)

Name of Work: - Providing, Supplying and fixing new MS Grill As Per Design Given and repairing, replacing M.S

Structural parts of existing grill and other necessary work at Diff.ward of Dyce-3 of West Zone(ARC)

No Qty. Item Rs. Per Amount in Rs.

1 150 Box cutting the road surface to proper slope and camber

for making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead 101.91 Cmt.

2 Conveyance charge of earth, lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly ash,

aggregates of any kind executed outside the road site. Rate

also includes spreading & levelling etc complete. Internal

conveyance above 50 mt done within the work site is not

a 112 f) Lead From 5 Km to 10 Km.

b 75 g) Lead From 10 Km to 15 Km.

3 Extra rate over item of excavation of earth for excavation

of asphalt pavement of thickness upto 0.20 meter

including demolishing the asphalt carpet,metal,soiling

etc.comp. with stacking the material as directed. -

a 225 up to 0.20 mt thickness

c 188 0.20 to 0.30 meter (By any type of Breaker Machine or

R.C.C.Cutter machine including cost of operator, fuel, &

transportation etc complete. 177.76 Smt

b 113 0.30 meter & above (By any type of Breaker Machine or

R.C.C.Cutter machine including cost of operator, fuel, &

transportation etc complete. 311.08 Smt

4 22 Providing and Casting in situ controlled Cement Concrete

M-200 for R.C.C.Raft and cutt-off walls including necessary

shuttering laying, vibrating, ramming and curing complete. 4399.29 Cmt

5 150 Providing formwork of ordinary timber planking so as to

give a rough finishi ncluding centering shuttering strutting

and propping etc.Height of propping and centering belows

up porting floor to ceiling not exceeding 4M. and removal

ofthe same for in situ reinforced concrete and plain

concrete work in.(A)Foundations Footings Bases of

Columns etc. and Mass concrete. 171.68 smt

6 75 Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in

position complete upto floor two level 75.46 Kg

7 Dismantling the following including loading, unloading and

disposal of unserviceable material for all lead or as

directed by Engineer-In-Charge and stacking the

serviceable material and backfilling the resulting trenches

and pits complete. -

i 75 Dismantling tiled or stone floors laid in mortar including

stacking of serviceable material and disposal of 47.25 Smt

uservicalble material with all lead and lifts. SOR 23-24 IT

ii 8 Demolition & disposal of unservisable material with all

lead and lift for unreinforeced concrete. SOR 23-24 IT CD

NO:20001B 603.23 Cmt

iii 8 Demolition of brick work & stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift (1) In cement

mortar. SOR 23- 24 IT CD NO:20003B 544.95 Cu.m

iv 8 Demolition including stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift. (I)

R.C.C work. SOR 23-24 IT CD NO:20002 1047.38 Cu.m

Brick work using common burnt clay building

bricks having crushing strength not less than

35kg./Sq.Cm.in foundation and plinth in Cement

8 Mortar1:6 (1-Cement :6 - fine sand) -

(A) Conventional (upto 10 ton)

Providing 15 mm thick cement plaster in single coat

on Rough (Similar) side of single or half brick walls for

interior plastering up to floor two level and finished

even and smooth in (i) Cement mortar 1:3 (1-cement :3-

9 150 sand) 174.83 Sqm

Making Grill As per Design Shown in Atteched Drawing

including Extra rate over item of excavation of earth for

excavation of asphalt pavement / RCC of thickness up to

0.20 meter including demolishing the asphalt carpet,

metal, soiling/cutting Reinforcement etc. comp. with

stacking the material as directed.

up to 0.20 meter thickness (By Manual) 0.20 to 0.30 meter

(By any type of Breaker Machine or R.C.C.Cutter machine

including cost of operator, fuel, & transportation etc.

complete.0.30 meter & above (By any type of Breaker

Machine or R.C.C.Cutter machine including cost of

operator, fuel, & transportation etc. complete.

for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the

excavated stuff all lead and lift.(B) all kinds of soil

EARTH WORK (EXECUTED WITH MANUAL LABOUR)

Concrete (PCC) of grade - M15

Providing and laying in position Ready Mixed M- 150 grade

concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured

in fully automatic batching plant and transported to site of

work in transit mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete

work including pumping of R.M.C. from transit mixer to

site of laying, excluding the cost of centering shuttering

finishing and reinforcement including cost of admixtures in

10 1350 recommended proportions as per IS: 9103 to accelerate/ 10,235.00 Rmt

retard setting of concrete, improve workability without

impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained) Concrete (PCC) of

Providing and laying in position Ready Mixed M- 200 grade

concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured

in fully automatic batching plant and transported to site of

work in transit mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete

work including pumping of R.M.C. from transit mixer to

site of laying, excluding the cost of centering shuttering

finishing and reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without

impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level

as per latest IS 456 shall be maintained)

Structural steel work - Fabrication works - with paint

Providing, fabricating, assembling, hoisting, erecting and

fixing in position structural steel work at all heights/ all

levels/ all shapes & sizes with all leads & lifts using any

type of MS section like rolled steel sections, hollow

sections, plates, chequered plates, bar, sheet, rod,

threaded bolt, railing etc. all confirming to latest relevant

IS codes for the metal elements i.e. window grill, transom

bar, bright bar in wooden door - window frame, railings,

gates, grills, bracings, foundation plate & bolt, support at

truss system, truss, purlin, rafter ,cleat, platforms,

brackets, fencing pole, signage pole, service elements, Jali,

clamp, logo etc. including straightening, cutting, bending,

embosing, bolting and welding, etching (if required) the

members all as per structural drawings and as per detailed

specifications (for materials & workmanship) including

profile cutting, smooth grinding, machining of edges/

faces, necessary welding (electric arc welding) for required

weld lengths and sizes, machine drilling of holes for

joining/ anchoring/bolting, necessary arrangements of

templates to keep the foundation bolts in position dry

sanding, degreasing (wet cleaning) & preparation of rust-

free surface manually or mechanically, metal putty to

make the surface even and smooth, necessary scaffolding/

staging, anchor fasteners,extra for bending elements for

fixing etc complete. Extra for providing hydraulic bending

to MS member (i.e. hollow sections, rolled steel sections,

any type of plates, sheet, bar etc) of any thickness any size

as per drawing, for any type of steel structures like railing,

bus shelter, signage structure, gantry structure etc.

including straightening, profile cutting, bending (precision

bending), etc all as per approved shop drawings and as

directed by Engineer in charge.

Extra for providing Hot dip galvanizing work

confirming to IS 4759/ 2629/ 2633 with zinc of 610 GSM

thickness on any type of MS section for any elements etc.

for all the places, all heights, all level as per the drawing

and as instructed by Engineer in charge. The rate shall

include preparing the surface by shot blasting/ acid

washing prior to hot deep galvanizing, labour, tools,

machinery etc complete (Sample to be approved). The

weight of steel sections before galvanization shall be

measured for payment. The cost of steel sections shall be

paid for separately under relevant item. complete as per

structural designs & directions of Engineer-in-charge.

Supply & fixing factory finished cold formed Light guage

steel frame sections confirming to SP:6 (5) 1980 at site or

work including riveted, bolted or welded in builtup for all

type of sections ,in framed work, cutting, hoisting, fixing in

position and applying primer coat of approved steel primer

etc. complete as per structural designs & directions of

11 3900 Engineer-in-charge. 113.31 Kg.

Providing and supplying of labour for necessary manual

excavation, cleaning, Shifting of Material Or any other, or

for any other work as directed by Engineer In charge. The

12 38 Rate includes Handcart with Mazdoor 551 No

Makadam/ supervision at day / Night

WELDER/ Gas cutter at Day /night

Supplying of welding machine / gas cutter including cost of

welding rods/gas, Transportation, including carting from

15 23 site to work place. 1500 No

Labour for removing, repairing refixing M.S.Railing/grill or

its part at any locations of of any size as per existing

design including cost of red oxide painting it using two coat

of enamel paint of approved color shade Cost includes cart

& deposit of the scrap materials at the AMC store. The

contractor has to execute the work on site bringing

16 894 portable welding, cutter machine etc.comp. 18 Kg

17 60 Supplying Pneumatic Breaker Machine for RCC Slab or

Asphalt Demolishing Work on site byusing

Operator,fuel,power Supplyetc.Complete as Directed.(No

payment should be allowed for non working condition of

machinery and for pipe line excavation and 600 hrs

Hiring and Operating Generator of 7.50KV to 10.0 KV at Shift

site for welding Machine where power is not available (8

18 36 Rate including diesel for Generator & transporting at site 1650 hour)

19 8 Hiring of Tractor with trolley considering 8Hrs .As working

Day hours inclu.Driver with fuel,(iteam cod eno:-

H033SOR2023-24, Ahmedabad District road 1661.02 Day

Providing and Fixing weldmesh jali in 1.2 mt. X 0.60 mt.

frame with 2 nos of 1.2 mt length in horizontal and 2 nos

of 1.2mt long 25 mm X 25 mm X 3 mm MS angle and fixing

at 1.2 mt C/C and in with 0.30 mt x 0.30 mt in 1:2:4

20 36 concrete. Rate including two coats approved brand enamal 775 Rmt

paint as per instruction given by engineer in charge.

21 300 Supplying and fixing of 300 mm-L x 150 mm-B x 380 mm-H

Kerb block for Footpath in M-20 grade using 20 mm

nominal size black trap aggregate of Sevaliya/Timba or

equivalent quality for pre-cast blocks, reasonably exposed

finish/ formwork , mould with well equipped with

vibratory system for kerb stones of approved design

including curing, etc. complete, including the cost of

formwork etc. complete. The rate shall also include

necessary cutting of asphalt, fixing the Kerb stones in line

and level on 5 cm thick sand bedding with necessary

equipments and materials. The rate shall also include the

flush pointing in CM (1:3) for all joints of the kerbstones.

Filling of zari alone the sides of the kerb stone fixed with

Bituminous concrete mixed in proper position as directed

by Engineer in change to form a portable mixture. In any

case Gravel or such type of materials shall not be allowed

for production. a) Laying on 5 cm thick Sand Bedding 350.89 Rmt

22 75 Supplying and fixing of 450 mm H x 300 mm L x

Below..100 mm B Above Double Teper Kerb block for

footpath/Central Verge in M-20 grade using 20 mm

nominal size black trap aggregate of Sevaliya/Timba or

equivalent quality for pre-cast blocks, reasonably exposed

finish/ formwork, mould with well equipped with vibratory

system for kerb stones of approved design including

curing, etc. complete, including the cost of formwork etc.

complete. The rate shall also include fixing the Kerb

stones in line and level on 5 cm thick sand bedding with

necessary equipments and materials. The rate shall also

include the flush pointing in CM (1:3) for all joints of the

kerbstones. 525 Rmt

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (West Zone)