SPL REPAIRS OF BLDG NO EW-17 (MAHAR LINE) OF 423 FD HOSP, SPL REPAIR TO WATER SUPPLY LINE NEAR ENGR REGT FAMILY QTR, DUMARDAGA, MAHAR SINGLE OFFRS AREA, RAMGARH GATE AND REPAIR/ REPLACEMENT OF UNSV LED/FLOOD LIGHTS AT AGE E/M INSTALLATION UNDER GE DI

Amount

Dismantling plain or corrugated steel sheeting of any guage, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles n exc 0.36sqm over 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Ditto as per item No 5 above but in skirting dado etc over 10mm thick cement plaster in CM (1:4) complete all as specified and directed.

M & L joint free Non Skid ceramic colour ceramic tiles 7 to 8mm thick square/rectangular area of each tile 0.06sqm but not exceeding 0.11 sqm in floors over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface coloured cement to match the floor complete all as specified and directed.

M&L Joint free for coloured glazed ceramic colour tiles in vertical surface in Skirting/Dados 350mm x 250mm x 7mm /450 x 350 x 7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.

Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering on other than fair faces of brick work 15mm thick in CM (1:6) and to be finished smooth and even with out using extra cement for internal surface complete all as specified and directed.

M&L rendering on other than fair faces of brick work 15mm thick in CM (1:4) and to be finished smooth and even with out using extra cement for external surface complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of distemper oil emulsion white or tinted over wall care putty and primer on wall surfaces all as specified and directed.

Complete removal of existing treatment and preparing the surface of walls over Birla putty/JK Wall putty and applying two coat of oil bound distemper complete all as specified and directed.

M&l for Preparing surfaces plastered on new surface of wall and applying two coats of exterior weather coat plastic emulsion paint over one coat of cement base primer complete all as specified and directed (Weather coat shall be of Asian paint, Apex, ultima or equivalent as approved by GE)

M&l for complete removal of existing treatment on old surface of wall by brooming down with wire brushing etc and applying two coats of exterior weather coat plastic emulsion paint complete all as specified and directed (Weather coat shall be of Asian paint, Apex, ultima or equivalent as approved by GE)

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and directed.

S&F Powder coated aluminium frame for windows with one or more rebates including joining cleat for fixing etc. Complete all as specified.

Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 & n exc 4 sq. m each, complete all as specified and directed.

S&F Powder coated aluminium window shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average with of aperture 1.18mm and fixed with tinned tack or galvanised wire staples

S&F Sheet glass,4.mm ordinary quality and glazing with in square n exc 0.5 sq. m in each pane

Supplied and fixed in repair vitteous chinaware EWC closet with white seat & cover with flat bottom with hinging device all as specified and directed.

S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm including washer .

S&F 20mm dia of ball valves high pressure of PTMT with epoxy coated alumunium rod & high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and directed.

S&F in repair vitreous china wash Basin white flat back size 550 x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F 40 mm low density polyethylene (HDPE) pipes

Supply and fixing in repair PVC low level flushing cistern of 10 Ltr capacity (Dual flush) including flushing pipe bend, PVC connection etc. complete all as specified and directed.

S&F in repair pillar tap 15mm dia cost copper alloy, wtih CP fancy type complete all as specified and directed.

S&F in repair Bib taps, 15 mm bore, chromium plated fancy type with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm dia stop valve fancy type chromium plated concealed type, screwed down high pressur, with crutch or butterfly handle, screwed both hands for iron pipe or for unions.

S&F in repair 15mm dia stop valve fancy type chromium plated screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F Soap dish, approximate size 160 x 160 x 90mm any type, fixed to plugs with chromium plated brass screws

S&F Chromium plated tubular towel rail, 20mm dia, D type 60 cm long between flanges.

S&F PVC (SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement.

Supplied and fixed in repair 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified.

Supplied and fixed GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed

Supplied and fixed GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed

S&F in repair 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and directed.

M&L PCC (1:3:6) Type C2 (40mm graded aggt) 75mm thick without using extra cement as in plinth protection.

M&L mild steel works as in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etc complete all as specified and directed.

S&F Mild steel works as in hand rails, wind ties for roof, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets for securing wire etc including all necessary drilling, bolting or riveting, etc; and similar work conforming to Fe 410-0 complete all as specified and directed.

M&L in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and directed.

All as per item No 45 above but n exc 10 cm width or girth complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supplied and fixed factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame as per specification & drawing complete all as specified and directed.

S&F SS Butt hinges medium weight 100mm size,cold rolled mild steel.

S&F Aluminium alloy, anodised handle cast type of size 125mm

S&F Aluminium anodised barrel tower bolt 150mm long.

S&F Aluminium anodised barrel tower bolt 200mm long.

S&F Aluminium alloy, anodised sliding door bolt of size 250mm with hasp and staple and fixing clips of sheet.

S&F pressed steel frames of size 125 x 60 mmx1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F 35mm Flush shutters (ISI Marked) solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and directed.

S&F 35mm thick glazed and skeletion shutters 2nd class hardwood without sash bars complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. Complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down old/unserviceable MCB DB SPN any capacity by disconnection of electric connection including MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down Old/ Unserviceabl MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs, MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn through PVC conealed conduit 20/25 mm dia on wall/ceiling, including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes, cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 62 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.

All as per Ser item No 62 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.

All as per Ser item No 62 here-in-before but one bell/buzzer point controlled by one push button on the independent board.

All as per Ser item No 62 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.

S&F Switch piano type, single pole, one way15 Amps complete all as specified and directed.

S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed

S&F Socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type complete all as specified & directed.

S&F in replacement electric Bell, ding dong type AC 230 Volt single pole complete all as specified & directed.

S&F in replacement Bell push 5 Amps for electric Bell/Buzzer, AC 230 Volt single pole complete all as specified & directed.

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.

S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed.

M&L for lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed.

M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No 76 here-in-before but 2 x 2.5 Sqmm and 1 x 2.5 Sqmm for Earth wire.

All as per ser item No 76 here-in-before but 2 x 4 Sqmm and 1 x 4.0 Sqmm for Earth wire

All as per ser item No 76 here-in-before but 2 x 6 Sqmm and 1 x 6.0 Sqmm for Earth wire

Supply and fix MCB DB SPN 12 way double door with metal door suitabl for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directedcomplete all as specified and directed.

Supply and fix MCB DB TPN 4 way with metal door suitable for Provision of incommer MCCB and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix in replacement MCCB 3 Pole 415 volts 100 Amps 50 Hz Adjustable type, with breaking capacity 10 KA complete all as specified and directed.

S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of MCB DP 40 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles.

S&F in replacement of MCB DP 63 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of LED tube light fitting 18/20 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver, including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head LED light fittings 10 watt capacity ,comprising of high brightness LEDs, IP54 protection complete with all accessories internally pre-wired and inncluding connecting up with 2/3 core twisted flexible copper conductor cable with suitable size of flexible PVC/steel Conduit complete all as specified and directed.

S&F LED Porch light fitting 6 W made up of polycarbonate, complete all as specified and directed.

S&F in replacement of building LED security light fitting 35 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut, bolt, washer etc complete all as specified and directed.

M&L for repair, rewinding/greshing of ceiling fan of any size sweep single phase. Celing fan of any size opening from any hight or any locations, fan opening from hook, clamp & refixing the same after cleaning and greshing with requird necessary cutting/ welding/ granding job or required store such as nuts, bolts, washer and suitable length mild steel/ down rod duly making holes etc complete as perspecified and directed.

S&F of ventilating air fan single phase 250 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size for well function of exhaust fan complete all as specified and directed.

Supply, Laying on replacement, connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed.

Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed. Note : Punned down thickness shall be considered for measurement .

Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed

M &L Earthing complete with galvanised steel earth plate electrode 60 × 60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed. Note :- (i) Earthing test must be carried out in presence of Engr-in-Charge. (ii) The earthing result not more than 2 Ohms or disered earth resistance value. (iii) Megger required for testing will be be provided at site by the contractor. (iv) Contractor shall submit earth resistance testing report before submission of bill.

Excavation in trenches n. exc 1.5 m width and not exc 1.5 mtr in depth for laying/taking out of pipe in soft/loose soil complete all as directed.

Returning/filling in trenches including spreading leveling, watering and well ramming in layer not exc 25 cm thick complete all as directed

Removal of excavated surplus soil n. exc 50 m and depositing where directed at level n exc 1.5 m above the starting point complete all as directed.

Taking up or down steel tubing and connections including cleaning for refixing or remove to MES store of following sizes. (Note earth works measured and paid separeately) (a) 15 MM bore

(b) 20 MM bore

(c) 25 MM bore

(d) 40 MM bore

(e) 50 MM bore

Refixing old steel tubing with necessary connections in old or new positions (laid in Trenches, walls, ceiling, floors etc) with necessary required including cleaning new fittings as per SSR Part-1 following of sizes complete all as directed. (a) 15 MM bore

(b) 20 MM bore

(c) 25 MM bore

(d) 40 MM bore

(e) 50 MM bore

Supply & Fixing in repair G.I tubes med grade Galvanized with necessary fittings and clamps as per SSR Part -1 laid in trenches /wall/floors concealed or open execution as directed. (a) 15 MM bore

(b) 20 MM bore

(c) 25 MM bore

(d) 40 MM bore

(e) 50 MM bore

Supply and fix in repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe with unions and fixed complete with suitable size of fittings like unions, long screw with check nut for iron pipe incl taking down existing stop valve complete all as directed at site of following sizes. (a) 15 MM bore

(b) 20 MM bore

(b) 25 MM bore

(b) 40 MM bore

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends with union, long screw with check nut for iron pipe incl taking down existing gate valve complete all as directed at site of following sizes . (a) 20 MM bore

(b) 25 MM bore

(c) 40 MM Bore

(d) 50 MM Bore

M&L drilling and tapping cast iron water mains in position for branch connections of following internal dia size complete all as directed. (a) 15 mm bore

(b) 20 mm bore

Cutting of existing CI pipe line of size 100/150mm bore for fixing of Tee, Sluice valve etc all as dierected.

Dismantling and taking down old unserviceable street light fitting/bldg security light fittings/High Mast Light fitting of any capacity, any height of pole /wall incl disconnecting the cable connections complete all as specified and directed.

S&F Pressure die cast aluminum alloy housing LED street light fitting 60 Watt comprises of pressure die cast Aluminium housing & having system efficiency 110 lumens/Watt i.e 6670 lumns, All LEDs should be highpower LEDs of 1W to 3W Only with moduler lens for batwin shape distribution of 30 degree & 60 degree, Input voltage working range is 140 Vac to 270 Vac, Brand name should be emoboised, Potted Driver is used with 4KV internal & external 5KV Potted surge protection, Short Circuit Protection, Open Circuit Protection, High & low voltage protection, fixture should withstand high & low voltage protection, fixture should withstand high voltage upto440 v for 8 hr, IP66 Protected, THD<10%, CRI>70CCT 5700+/-300K, PF>0.9, Driver efficiency>85%, LM79 report require from NABL Accediated lab all as specified and directed

Supply & Fix LED flood light ftg 150 Watts, Incl Driver unit assy with surge protection, Short Circuit Protection, Open Circuit Protection, High & low voltage protection, fixture should withstand high & low voltage protection, fixture should withstand high voltage upto 440 v for 8 hr, IP66 Protected,

Supply, laying, jointing, testing and commissioning PVC insulated, unarmoured, heavy duty with copper conductor, 1100 volts grade cross sectional area 6 sqmm 3 core connected complete all as specified and directed

M/S GYANITECH ENTERPRISES

ashiyana electrical company

BHARATI ENTERPRISES

universal enterprises

M/s Mukesh and company

BHARAT ELECTRICAL & ELECTRICAL WORKS