CERTAIN REPAIRS TO INTERNAL WATER SUPPLY, RAIN WATER PIPES AND ALLIED B/R WORKS AT INS SARDAR PATEL, NAUSENA BAGH AND NOFRA UNDER GE NAVY PORBANDAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Glazed ceramic tiles, joint free,coloured (light colour as approved by Engineer-in-Charge) of size 300mm x 600mm x 7mm / 350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white or coloured cement to match the colour of tiles, complete all as specified and as directed.

Coloured non skid ceramic tiles 7to8 mm thick (min) (square /rectangular) area of each tile not exceeding 0.11 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry bedded in any mortar complete all as specified.

20mm thick Granite of Ist quality, table rubbed and polished, in floor set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick bedding layer in cement mortar 1:4, including grinding and polishing, complete all as specified and as directed.

20mm thick Granite of Ist quality, table rubbed and polished as in skirting / DADO or vertical surfaces and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including rendering 10 mm thick in cement mortar 1:3 complete all as specified and as directed.

Vitreous Ceramic floor Mounted EWC fancy type along with one piece EWC's with seat cover and twin flush fittings ( snow white or ivory or colour as approved ) with Soft Close Seat Cover and Twin Flush Fittings 700 x 430 x 770 mm of flush tank with all necessary fittings with fixing arrangements and connecting to water pipe and WC etc including P or S trap fitting and fixed in repairs complete all as specified and directed by Engineer in charge.

16mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, reconnecting existing fittings, fixed in repair complete all as specified directed.

20mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, reconnecting existing fittings, fixed in repair complete all as specified directed.

25mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, reconnecting existing fittings, fixed in repair complete all as specified directed.

50mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, reconnecting existing fittings, fixed in repair complete all as specified directed.

62.5mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, reconnecting existing fittings, fixed in repair complete all as specified directed.

75mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, reconnecting existing fittings, fixed in repair complete all as specified directed.

100mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, reconnecting existing fittings, fixed in repair complete all as specified directed.

150mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications, reconnecting existing fittings, fixed in repair complete all as specified directed.

CPVC ball valve for 25 mm bore pipe with long handle, fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fittings and solvent complete all as specified and directed.

CPVC ball valve for 20 mm bore pipe with long handle, fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fittings and solvent complete all as specified and directed.

CPVC ball valve for 15 mm bore pipe with long handle, fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fittings and solvent complete all as specified and directed.

12mm thick toughened glass for door, partition etc. of any size and side portions of toughened glass fixed to wall / floor, joints sealed with clear silicon silicate gel to make water tight, edges with diamond cut including taper drilling to flush the screws / all fitting as required, floor hinges, patch fitting top, bottom and sides, lock and handles, spider joint etc. and concealed floor door spring as per requirement all as specified, required at site by manufacturer instructions and complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.

PVC (SWR) pipes, 75mm bore, single socketed, 2.50 Kgf per Sqcm pressure, in any length with rubber ring joints complete all as specified and as directed.

75mm dia bore PVC (SWR) bends, single / double 'Y' or 'T', with access doors, any radius including fixing clips complete all as specified and as directed.

Taking out PVC pipe 75mm bore of any description and refixing the same after cleaning, reparing with solvent complete all as specified and as directed.

PVC (SWR) pipes, 110mm bore, single socketed, 4.00 Kgf per Sqcm pressure, in any length with rubber ring joints complete all as specified and as directed.

110mm bore PVC (SWR) bends, single / double 'Y' or 'T', with access doors, any radius including fixing clips complete all as specified and as directed.

PVC (SWR) pipes, 150mm bore, single socketed, 10.00 Kgf per Sqcm pressure, in any length with rubber ring joints complete all as specified and as directed.

Taking out PVC pipe 150mm bore of any description and refixing the same after cleaning, reparing with solvent complete all as specified and as directed.

150mm bore PVC (SWR) bends, single / double 'Y' or 'T', with access doors, any radius including fixing clipscomplete all as specified and as directed.

PVC (SWR) pipes, 200mm bore, single socketed, 10.00 Kgf per Sqcm pressure, in any length with rubber ring joints complete all as specified and as directed.

Taking out PVC pipe 200mm bore of any description and refixing the same after cleaning, reparing with solvent complete all as specified and as directed.

200mm bore PVC (SWR) bends, single / double 'Y' or 'T', with access doors, any radius including fixing clipscomplete all as specified and as directed.

Cast iron floor trap outlet diamete upto 100mm dia , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

PVC (SWR) floor trap upto 75mm outlet , plain with grating including jointing with solvent cement including set with C M ( 1:4 ) complete all as specified and directed.

PVC (SWR) multi floor trap 75mm dia out let with grating including jointing with solvent cement including set with C M ( 1:4 ) complete all as specified and directed.

Complete cleaning of Internal flooring traps / sink traps with necessary tools including refixing the grating in same position complete all as specified and directed.

Brass Chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including packing, union and cap fixed in repair / replacement complete all as specified.

Taking down and refixing of Brass CP mixer for mixing for & cold water screwed down for iron pipe / CPVC tread and fixed to same position including cleaning stubborn water stain marks and hard sacaling, rust complete all as specified and directed.

Vitreous china semi-pedestal pattern (Anglo-Indian type) white with P or S trap, connection to trap, and to flushing pipe, antisyphonage pipe, etc. including making good to floor, water closet seat cover, with flat bottom, and mild steel chromium plated or aluminised hinging divice fixed in repair / replacement complete all as specified and directed.

Vitreous China wash down water closet (Pedestal pattern) white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device including connection to drain (or outgoing pipe) and to flushing pipe antisyphonage pipe fixed in repairs / replacement complete all as specified and directed.

Vitreous china wash Hand basin size 550 x 400 mm including waste pipe and waste coupling chromium plated, brackets and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chain and plug fixed in repair / replacement complete all as specified and directed.

Fixing only in High or low level fluslhing cistern retrived fromexisting IWC/EWC OR Angilo Indian type (exclusive of brackets), and connections to pipes and fixing of chain and pull or lever if any complete all as specified and directed. (The old flushing system will be reused after repair of WC's ot other appliances)

150mm dia flanged cast iron sluice valve high pressure for 150mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent fixed in repairs complete all as specified and as directed.

Disconnecting existing tanks 1001 to 2000 litre capacity seeting aside (lowering if required) for repairs, cleaning and hoisting if required reconnecting and refixing in position with cleaning, repairing including connection with inlet and outlet with GI/CPVC pipe fitting, float valve complete all as specified and directed.

Disconnecting existing tanks 501 to 1000 litre capacity seeting aside (lowering if required) for repairs, cleaning and hoisting if required reconnecting and refixing in position with cleaning, repairing including connection with inlet and outlet with GI/CPVC pipe fitting, float valve complete all as specified and directed.

Disconnecting existing tanks 251 to 500 litre capacity seeting aside (lowering if required) for repairs, cleaning and hoisting if required reconnecting and refixing in position with cleaning, repairing including connection with inlet and outlet with GI/CPVC pipe fitting, float valve complete all as specified and directed.

Disconnecting existing water tanks upto 250 litre capacity seeting aside (lowering if required) for repairs, cleaning and hoisting if required reconnecting and refixing in position with cleaning, repairing including connection with inlet and outlet with GI/CPVC pipe fitting, float valve complete all as specified and directed.

Dismantling of water tanks and removing from the site of capacity exc 251 ltr and n'exc 500 ltr complete all as specified and as directed.

Dismantling of water tanks and removing from the site of capacity exc 501 ltr and n'exc 1000 ltr complete all as specified and as directed.

Dismantling of existing water tanks and removing from the site of capacity exc 1001 ltr and n'exc 2000 ltr complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks 250 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with inlet outlet with suitable PVC Float Valve etc connections all as specified in SSR Part I complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with inlet outlet with suitable PVC Float Valve etc connections all as specified in SSR Part I complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with inlet outlet with suitable PVC Float Valve etc connections all as specified in SSR Part I complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 2000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with inlet outlet with suitable PVC Float Valve etc connections all as specified in SSR Part I complete all as specified and directed.

20mm ball brass valve high pressure with polyethlene float flynut complet screwed with iron pipe or brass ferrule and fixed in repair complete all as specified and as directed.

25mm ball brass valve high pressure with polyethlene float flynut complet screwed with iron pipe or brass ferrule and fixed in repair complete all as specified and as directed.

20mm bore stop valves cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed both ends complete all as specified and as directed.

Note :- The sanitary fittings fixtures and appliance taken out for B/R and allied repairs are to be refixed, reconnected properly to make it fully functional after these repairs and cost is deemed to be inclusive in unit rate quoted for respective items.

Vastushilp Building Designer

SANVI ASSOCIATES

SHREEJI ENTERPRISE

shree chamunda enterprise

AADESH CONSTRUCTION

Bharat Enterprise

J J ENTERPRISES