SPECIAL REPAIR TO ELECTRICAL WIRING AND PANELS IN P-134 (OFFICERS MESS) AT AFS PHALODI

Amount

Taking down carefully copper/aluminium point wiring (light/fan/socket) complete with all accessories such as switches, sockets, celing rose, wall brackets etc fitted and removing dismantled material & making good disturbed surfaces of walls/floor etc and matching with existing surface all as specified and directed by Engr-in-charge.

Material & Labour for point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLSH cable 1100 Volts grade drawn into in existing concealed/ surface conduit for one light point /fan point controlled by one switch and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes/Modular metal flush box duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and connecting to earth dolly in MS Sunken box, making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified & directed by Engineer-in-charge

Material & Labour for point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLSH cable 1100 Volts grade drawn into concealed PVC conduits medium grade not less than 20mm( ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes/Modular metal flush box duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces for One light/ Fan Point controlled by one switch complete all as specified & as directed by Engineer-in-charge

All as per item No. 3 above but for one 3 pin socket out let 5 Amp on same board.

All as per item No 3 above but for one 3 pin socket out let 5 Amp on independent board.

All as per srl item No. 3 above but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated sheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge.

S& F modular type switch piano type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed by Engineer-in-Charge.

S& F modular type switch piano type, 16 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed by Engineer-in-Charge.

S&F modular one socket outlet 5 Pin 5 Amp 230 volts AC omplete all as specified. Note:- Switch and socket shall be of same make.

S&F modular one socket outlet multipurpose 3 Pin 5 Amp and 6 Pin 15 Amp 230 volts AC complete all as specified. Note:- Switch and socket shall be of same make.

S&F modular Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of ceiling rose surface PVC/ Polycarbonate, 3 terminals with back plate etc complete all as specified and directed by Engineer-in-Charge.

S & F in replacement of Batten holder 2 Amp 250V AC with skrit ISI marked top line series , pvc/ polycarbonate cased body of brass with back plate suitable for batten fittings and with LED bulb 9/10 watt B22 base 6000K complete all as specified.

Supply and Fixing in renewal modular white cover plate with frame, 2module complete all as specified and directed.

Supply and Fixing modular white cover plate with frame, 3module complete all as specified and directed.

Supply and Fixing in renewal modular white cover plate with frame, 4module complete all as specified and directed.

Supply and Fixing in renewal modular white cover plate with frame, 6module complete all as specified and directed.

Supply and Fixing in renewal modular white cover plate with frame, 8module complete all as specified and directed.

S&F in replacement of Smart bright Batten Series, LED luminaire using LED 20 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl),

S&F in renewal LED light fitting 9/10 Watt 2 feet light luminarire with poly carbonate cover complete with all acessories and driver including connections with with 3 core copper wire of suitable size all as specified.

S&F in renewal LED Ceiling light square recessed mounted LED flat panel complete 600mm x 600mm, 230 volts 35/36 Watt LED light fixing on Surface/ceiling and connecting with 3 core copper conductor cable etc complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of flood light luminaire of HPSV/MH,with LED flood light fitting consist of PDC aluminium houseing in powder coated dia costing power coted in gray finish,high power LED with IP 66 protection, fins are provided on housing ,heat resistant tempered glass for protection with 5 kv surge protection of 120 W LED as specified and directed.

S&F in replacement of LED bolard with aluminium pipe housing with glare free PMMMA Deiffuser, 5700K 18 watt fixed on the ground with sapport of PCC/ Jodhpur Stone complete all as specified and as directed.

S&F in replacement of unserviceable 35W LED Post top with decorative circular design complaint to dark sky norms with polycarbonate opal diffuser and IP 65 protection complete with all accessories suitable for connection of copper wires complete all as specified and directed.

S&F in replacement of LED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.

Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 9 WATT made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed. Make:City 1 of havells or equivalent in bajaj ,philips

S&F in replacement of Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed.

S&Fin replacement of LED Ceiling light circular recessed mounted/ Surface mounted LED slim square/ round down lighter complete, 230 volts 12 Watt LED light fixing on wall/ceiling and connecting with twin core copper conductor FR-LSH cable etc complete all as specified and directed by Engr-in-charge.

Supplying and fixing,testing the water heater storage type 25 litres, BEE Five star Rated capacity and after connecting electric and water connection and screwing nuts and bolts , anchor hold fast to fixed on wall and making the good the disturbed surface, complete all as required and as directed at site.

S&F in replacement of Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket, one single pole 20 Amps, 240V MCB complaints complete all as specified and directed

S&F in replacement of Tripal pole and neutral sheet metal enclosure with a three pin and earth plug and socket, one tripal pole 32 Amps MCB , 415V complaints complete all as specified and directed

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN, 8 way, 240 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN, 12 way, 240 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting TPN, 4 way, 415 Volt, suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

Supply and fixing double door VTPN Distribution box sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting , 8 way, 415 Volt, fitted with shrouded nutral , insulated pin type copper bus bar , Din rail , earth bar of of 4 way , complete with MCCB 125 Amps as incoming complete all as specified and directed.

S&F in renewal MCB TPN 63 Amps C curves MCB repturing capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge.

S&F in renewal MCB TPN 40 Amps C curves MCB repturing capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge.

S&F in renewal MCB SPN 63 Amp C curves MCB repturing capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge.

S&F in renewal MCB SPN 40 Amp C curves MCB repturing capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge

S&F in renewal MCB SP 6 to 32 Amp B curves MCB repturing capacity 10 KA etc complete all as specified and directed by Engineer-in-Charge

S&F including taking down of Sub main wiring with 2 X 4 sqmm single core cable PVC insulated unsheathed of copper multi strandard conductor cable , 1100 votls grade drawn in PVC conduit and including PVC conduit and insulated 1X 4 sqmm unsheathed multistranded FR-LSH copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. (Note:- 2 lengths of 4 Sqmm & 1 length of 4 sqmm cable and PVC conduit will be measured as one length).

S&F including taking down of Sub main wiring with 2 X 6 sqmm single core cable PVC insulated unsheathed of copper multi strandard conductor cable , 1100 votls grade drawn in PVC conduit and including PVC conduit and insulated 1X 6 sqmm unsheathed multistranded FR-LSH copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. (Note:- 2 lengths of 6 Sqmm & 1 length of 6 sqmm cable and PVC conduit will be measured as one length).

S&F including taking down of Sub main wiring with 4 X 6 sqmm single core cable PVC insulated unsheathed of copper multi strandard conductor cable , 1100 votls grade drawn in PVC conduit and including PVC conduit and insulated 1X 6 sqmm unsheathed multistranded FR-LSH copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. (Note:- 4 lengths of 6 Sqmm 1 & 2 length of 6 sqmm cable and PVC conduit will be measured as one length).

S&F including taking down of Sub main wiring with 4 X 10 sqmm single core cable PVC insulated unsheathed of copper multi strandard conductor cable , 1100 votls grade drawn in PVC conduit and including PVC conduit and insulated 1 X 10 sqmm unsheathed multistranded FR-LSH copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. (Note:- 4 lengths of 10 Sqmm & 1 length of 10 sqmm cable and PVC conduit will be measured as one length).

S&F in renewal for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burred in ground vertically earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of GI nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate upto 5 mtr and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion.

All as Item No 45 above but using galvaninised Iron strip 25 x 4 mm as earth lead

Supplying and laying/fixing in replacement of old, unserviceable GI tubing light grade 40 mm dia for encasing strip for mechanical proctection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or as mounting bracket bend to shape with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works all as specified and directed of sizes

Cutting of road / hardstanding upto a size not exceeding 20 cms in width and not exceeding 60 cms in depth for laying of LT UG cable protection pipe line making good the disturbed portion so as to match existing finishing or with PCC 1:2:4 type C1 complete all as specified.

Dismantling of existing unserviceable/cracks PCC poles of any size and type from its position from the site and taking away from site including necessary excavation and earth work in any type of strata,demolition of concrete, disconnecting of street light fitting etc all as specified and as directed.

Supply, errecting & fixing in true vertical position Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 metres long) confirming to relevent IS including one coat of primer of red oxide and two coats of aluminium paint and two coats of bituminous paint inside and out side of bottom portion up to 1.8 mtr length complete all as specified and directed.

Supply laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor,1100 volts grade, of size 70 sqmm x 3.5 core

Supply laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor,1100 volts grade, of size 95 sqmm x 3.5 core

Supply laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor,1100 volts grade, of size 25 sqmm x 4 core

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-35 watt rated pf 0.98 360 rpm air delivery 220m3, 5 star with rated service value min 6m2/min/watt with 5 Year Warranty, no of blades three type of blade leaf min 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site by Engr- in- charge

S & F Exhaust fan heavy duty size sweep 300 mm sweep, 230 v, 50 Hz , complete with metalic louvers including making holes and making good the disturbed surface and 3 core copper wire of size 0.50 sqmm for connection complete all as specified and directed by Engineer in-charge.

S & F Exhaust fan heavy duty size sweep 450 mm sweep, 230 v, 50 Hz , complete with metalic louvers including making holes and making good the disturbed surface and 3 core copper wire of size 0.50 sqmm for connection complete all as specified and directed by Engineer in-charge.

Supply and install, testing and commissioning of LT panel board outdoor cubicle type floor mounted 3.15 mm thick CRCA sheet, weather proof to accommodate the following controls:- (a) MCCB 200 Amp, 35 kA,4 Pole - 1 Nos.(I/C ) (b ) MCCB 160 Amp, 25 kA,4 Pole - 2 Nos.(O/G ) (c) (c)MCCB 100 Amp, 25 kA,4 Pole - 1 Nos.(O/G ) (d) CTs 500/ 5 ma - 1 Set of 3 (e) .Digital Panel Meters Class 1with 3 Phase Voltage, Current Frequency, PF, KW,KVA,KVAR and kWh (f) Aluminium Busbar 500 Amp - 1 set of 4 (g) Change over switch 200 Amps -01 complete wiring of panel & Installation all as specified

Supply and install, testing and commissioning of LT panel board outdoor cubicle type floor mounted 3.15 mm thick CRCA sheet, weather proof to accommodate the following controls:- (a) MCCB 200 Amp, 35 kA,4 Pole - 1 Nos.(I/C ) (b ) MCCB 160 Amp, 25 kA,4 Pole - 3 Nos.(O/G ) (c) (c)MCCB 100 Amp, 25 kA,4 Pole - 3 Nos.(O/G ) (d) CTs 500/ 5 ma - 1 Set of 3 (e) .Digital Panel Meters Class 1with 3 Phase Voltage, Current Frequency, PF, KW,KVA,KVAR and kWh (f) Aluminium Busbar 500 Amp - 1 set of 4

S&F in replacement LT feeder pillar box factor made cubical type dust proof, out door type both side opening of size 100 x 80 x 40 cm of MS sheet 3 mm thick power coated machine pressed front opening with rubber gasket / bedding , locking arrangement with sliding bolt including aluminium bus bar of 400 amps 4 strips mounted on insulators each strip should be munted minimum two insulator and nut bolt panel shall be mounted on angle iron frame and legs made from angle iron of suitable size duly spray painted internally and externally with two coat of synthetic enamel paint over a coat of red oxide primer grouted in PCC 1:2:4 type ‘B’ ( using 20 mm graded stone aggregate complete incoming / outgoing cable provision.

LT Cable junction box outdoor shall be made out of Polycarbonate reinforced and size should be not less than 205mm x 255mm x 112 mm(upto Cable Size 35/25 sq.mm). The Polycarbonate Junction Box shall be environment friendly, recyclable, halogen & silicon free, anti acid & anti corrosive. The Junction Box shall be rated for Degree of ingress Protection IP 66/69 in accordance with IEC 60695.Weatherproof, UV-resistant, rainwater-proof, temperature-resistant. The gasket material of junction box shall be Polyurethane and the gasket shall be internally embedded. The Junction Box shall be complies with requirements of the standards IEC 60695 - . The Junction Box with Connectors or Terminal Trip or Bus Bar. The manufacturer of Junction Box / Enclosure shall submit a copy of IEC Certificate . For better safety the Polycarbonate enclosure and shall be fire retardant & self - extinguishing in accordance with IEC 60695 - The impact strength of Polycarbonate enclosure / boards i.e. the Degree of protection against mechanical load shall be in accordance with EN 50298 - 98 for IK 08 including one No. 4 pole connector and one no. MCB SP 'B' curved 6-32 Amp and chromium plated clamps and nut bolts, Glands complete all as per manufacturer’s instructions.

Dimantling of existing unserviceable PCC pole of any size and type from its position from the site and taking away from site including necessary excavation and earth work in any type of soil, demolition of concrete, disconnecting of street light fitting etc complete all as specified and directed.

Excavation in trenches, n.exc 1.5m wide & n.exc 1.5m in depth for foundation & getting out in Soft/ loose soil etc for laying of cable complete as specified.

Removal of surplus soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified

Material and labour for dry tibba sand in trenches cushioning to under ground cable spreading, levelling hand punning complete all as specified and directed.Note- Punned down thickness will be measured for payment purpose.

Supply and lay un reinforced precast concrete cable covers Class LV,Type 1, flat, size 250mm x 150mmx 40mm complete all as specified and directed.

Disconnecting and Taking out of old LT armored PVC cables from trenches of any size/core/any voltage grade from trenches for replacement all as directed by Engr in charge

S&F in replacement of GI Tubes of size 50 mm bore ,ISI MARKED light grade, galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F in replacement of GI Tubes of size 40 mm bore ,ISI MARKED light grade, galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Material and labour for Cement Concrete 1:2:4 type B1 using 20mm graded stone aggregate for pole base foundation and coping complete all as specified and as directed

M&L in repair cement concrete PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in pole foundation all as specified

JAI ENTERPRISES (BID ID -3270348)

M/s Shiv Builder and Suppliers (BID ID -3269938)

M/S BHERA RAM & SONS (BID ID -3270627)

SHREE KARNI LIGHT HOUSE (BID ID -3270503)

KRISHNA CONSTRUCTION COMPANY (BID ID -3273654)

M/S SUMAN ENTERPRISES (BID ID -3271851)

Nvimal Engineers and Contractor (BID ID -3273711)