Work of Painting on Kiosks, CB and other repairing extinguisher at 220 KV Sub-Station, Mahuakheraganj

Amount

Painting on Kiosk. after rubbing/Scrubbing and removing rust by emery paper and wipping clothes making clean. And then two coats of best quality synthetic enamelled paint of approved shade excluding of roof of Kiosk etc. prior of cost of all materials required. complete in all respect. ( Size of kiosk 5.30 m X3.80 mX3.25 m ) Total 12 Nos of Kiosk

Opening both side and top Cover of 220 KV Circuit Breaker Mechanism boxe. and rubbing/Scrubbing and removing rust using embery paper or wire brush and cleaning of all surface and applying two coat of synthetic enamel paint as used in old colour. After that fixing cover of Breaker Mechanism box safely etc.

Painting on 220 KV BMK (Bay Marshalling Kiosk) Junction Boxes after rubbing/Scrubbing and removing rust by emery paper and wipping clothes making surface smooth and clean. And then two coats of best quality synthetic enamelled paint of approved shade exclucing outer roof of Junction boxes etc. prior ot primer and cost of all materials required. complete in all respect.

Painting on 220 KV CT Junction Boxes after rubbing/Scrubbing and removing rust by emery paper and wipping clothes making surface smooth and clean. And then two coats of best quality synthetic enamelled paint of approved shade exclucing outer roof of Junction boxes etc. prior ot primer and cost of all materials required. complete in all respect.

Painting on 220 KV CVT Junction Boxes after rubbing/Scrubbing and removing rust by emery paper and wipping clothes making surface smooth and clean. And then two coats of best quality synthetic enamelled paint of approved shade exclucing outer roof of Junction boxes etc. prior ot primer and cost of all materials required. complete in all respect.

Replaced/Repairing of fire extingusher and sand keeping Hut. Removing old and damage Tin Profile sheet and replace new Tin profile sheet and fixing with nut/bolt and required materials.

Repairing of plaster of thickness 12mm in patches of Fire extingusher and sand keeping hut and ladder circuit breaker and ladder of kiosks and pit hut of transformers. plastering the surface of the walls complete including disposal of debris to the dumping ground With cement mortar 1:4

Painting on fire extingusher and sand keeping Hut. after rubbing/Scrubbing and removing rust by emery paper and wipping clothes making clean. And then two coats of best quality synthetic enamelled paint of approved shade exclucing of and seiling of hut etc. prior ot primer and cost of all materials required. complete in all respect.

Complete painting of DG Set Hut after cleaning of MS angle, strik then apply one coat red primer and tow coat paint including cost of material, labour and T&P complete work.

Replaced/Repairing of fire Bucket stand. Removing old and damage Tin Profile sheet and replace new Tin profile sheet and fixing with nut/bolt and required materilas.

Complete painting of fire Bucket stand after cleaning of MS angle, strik then apply one coat red primer and tow coat paint including cost of material, labour and T&P complete work.

Removing old white or colour wash by scapping using sand paper and preparing the surface smooth .Providing and applying white cement based putty .Finishing the work with painting of fire extingusher and sand keeping Hut and Ladders of breakers and ladder of kiosks and pit hut of transformers with water proofing paint of required shade: one coat of primer and two coat of cement paint on Laddres alongwith all misc. works.

RAHUL TRADERS

GLOBE TECH SOLUTIONS CONSULTANCY PVT LTD