REPAIRS TO CERTAIN TYPES OF WOODEN AND STEEL LOCKERS TABLE DINING ORS CHAIR VERANDAH WOODEN CHAIR CHAIR VERNDAH ALU AT BSO NORTH UNDER GE NORTH SEC BAD

Amount

LOCKER BED SIDE STEEL FD257 & FD1029 Removing the existing unserviceable handle and supply and fix new steel handle cast type of 100mm size for 'Locker bed side steel' and complete all as specified and shown on drawing.

Removing the existing unserviceable Clamp/stud and supply and fix clamp shaped stud steel sheet made out of 1mm thick sheet of size 75mmx80mm duly shaped for holding hinges/shutter complete all as specified and shown on drawing.

Removing the existing unserviceable tower bolt and supply and fix stainless steel tower bolt 50mm long complete all as specified and shown on drawing.

Removing the existing unserviceable hasp and staple and supply and fix Stainless steel hasp and staple of size 75mmx40mmx3mm complete all as specified and shown on drawing.

Removing the existing damaged bottom portion with legs and supply and fix bottom portion with legs of locker bed side steel made out of 1mm thick mild steel sheet with full duly cutting, welding to all sides of the new legs and applying two coats of olive green synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drawing.

Removing the existing conduit pipe and supply and fix 20mm dia steel conduit pipe hanger rod 375mm long in the locker bedside steel complete all as specified and shown on drawing.

Removing the existing sockets for conduit pipe and supply and fix 20mm dia steel sockets to hold conduit pipe complete all as specified and shown on drawing.

Removing the existing unserviceable/broken shelf and supply and fix shelf of size 530mmx370mm x 1mm thick mild steel sheet of locker bed side steel complete all as specified and shown on drawing.

Removing the existing unserviceable broken Shutter and supply and fix shutter of size 910mmx340mm x 1mm thick mild steel sheet and complete all as specified and shown on drawing.

Material and labour for preparation of the surfaces of locker bed side steel internally and externally and making good the locker duly welding/denting to all places of locker where ever required and applying two coats of synthetic enamel paint of Olive green colour over a coat of red oxide primer with machine spray complete to all old/new surfaces internally & externally complete as specified and shown on drawing.

LOCKER BED SIDE DB-4074 Removing the existing unserviceable /broken shelf and supply and fix shelf of 12mm thick ply wood with one side teak face for locker bedside complete all as specified and shown on drawing and as directed.

Removing the existing unserviceable broken top planks and supply and fix 19mm thick teak wood top for locker bedside complete all as specified and shown on drawing.

Removing the existing unserviceable broken side panel and supply and fix teak wood side panel planks of 8mm thickness for locker bedside complete all as specified and shown on drawing.

Removing the existing unserviceable broken bottom planks and supply and fix teak wood bottom plank of 12mm thickness for locker bedside complete all as specified and shown on drawing.

Removing the existing unserviceable broken leg and supply and fix teak wood leg of size 50mmx50mmx50mm for locker bedside complete all as specified and shown on drawing and as directed.

Removing the existing unserviceable broken back panel and supply and fix 10mm thick teak wood back panel for locker bedside complete all as specified and shown on drawing.

Removing the existing unserviceable broken door shutter and supply and fix 10mm thick teak wood panel/frame with teak wood shaping for rails of door shutter of locker bedside with necessary butt hinges of required size complete all as specified and shown on drawing.

LOCKER BED SIDE FD-54 Removing the existing unserviceable broken shelf of locker bed side and supply and fix shelf of 12mm thick ply wood with one side teak face complete all as specified and shown on drawing.

Removing the existing unserviceable broken top panel or partition panel and supply and fix 19mm thick teak wood top panel or partion panel of locker bed side complete all as specified and shown on drawing.

Removing the existing unserviceable broken side panel or partition panel and supply and fix 19mm thick teak wood side panel or partition panel of locker bed side complete all as specified and shown on drawing.

Removing the existing unserviceable broken bottom panel and supply and fix 19mm thick teak wood bottom panel of locker bed side complete all as specified and shown on drawing.

Removing the existing unserviceable broken leg and supply and fix teak wood leg of size 50x50x75mm for locker bed side complete all as specified and shown on drawing.

Removing the existing unserviceable broken rail stiffener and supply and fix teak wood rail stiffener of size 40mmx25mm to fixing leg of locker bed side complete all as specified and shown on drawing.

Removing the existing unserviceable broken back of locker bed side and supply and fix 6mm thick ply wood back with commercial face veneers on both sides complete all as specified and shown on drawing.

Removing the existing unserviceable broken shutter and supply and fix new shutter of 18mm thick one side teak ply wood including providing teak wood edging of 18mm X 6mm all round the shutters with necessary butt hinges of suitable size complete all as specified and shown on drawing.

LOCKER BEDSIDE : FD-222 Removing the existing unserviceable broken shelf and supply and fix shelf of 12mm thick ply wood with commercial face veneers on both sides exterior grade, to the front side of shelf with 12mmx6mm teak wood beading duly painting with two coats of grey synthetic enamel paint to the beading complete all as specified and shown on drawing.

Removing the existing unserviceable broken side panel of locker and supply and fix side panel of size 1030mmx515mm wide made out of 19mm thick plywood complete all as specified and shown on drawing.

Removing the existing unserviceable broken back panel and supply and fix back panel of 6mm thick ply wood commercial both side phenyl bonded of the size 1030mmx765mm duly painting with two coats of synthetic enamel paint complete all as specified and shown on drawing.

Removing the existing unserviceable broken top of locker bed side and supply and fix top bed side 19mm thick plywood complete all as specified and shown on drawing.

Removing the existing unserviceable teak wood supports and supply and fix teak wood supports of size 25mmx25mm and 590mm long at five corners of the lockers bed side fixed with screws of 4 Nos of size 35mmx8mm each side duly polished with two coats of french polish to the legs complete all as specified and shown on drawing.

Removing the existing unserviceable broken shutter of locker bed side and supply and fix shutter of 18mm thick pre-laminated particle board duly providing teak wood edging of 18mmx6mm all round the shutter duly polishing two coats to teak wood edging complete all as specified and shown on drawing.

Removing the existing unserviceable broken centre partition inside of locker bed side and supply and fix 12mm thick commercial ply both side duly providing teak wood edging complete all as specified and shown on drawing.

Removing the existing unserviceable broken bottom of locker bed side and supply and fix bottom of 19mm thick plywood commercial complete all as specified and shown on drawing.

COMMON ITEMS FOR LOCKER BED SIDE : DB-4074, FD54 & FD222 Removing the existing unserviceable continous piano hinges of locker bedside and Supply and fix mild steel piano type hinges of width of flaps 35mm (when open) bright finished complete all as specified and shown on drawing.

Removing the existing unserviceable handle of locker bedside and supply and fix 75mm size mild steel pressed handle oval type stove enamelled black and complete all as specified and shown on drawing.

Removing the existing unserviceable Butt Hinges of locker bedside and supply and fix mild steel Butt Hinges medium weight 75mm long complete all as specified and shown on drawing.

Removing the existing conduit and supply and fix 19mm aluminium pipe of length 350mm as hanger rod inside the locker bedside complete all as specified and shown on drawing.

Removing the existing unserviceable hasp and staple and supply and fix mild steel 75mm long hasp & staple complete all as specified and shown on drawing.

Material and labour for polishing one or more coat to locker bedside duly preparing the surfaces complete all as specified and shown on drawing. Drg No. DB4074 & FD54

Material and labour for preparation of old/new surfaces of locker bedsides and applying one coat of synthetic enamel paint, grey colour internally and externally complete all as specified and shown on drawing.

BOOK CASE FD 45 & 237 Removing the existing broken back and supply and fix back of 6mm thick ply wood commercial type of size 1200mmx660mm complete all as specified and shown on drawings.

Removing the existing unserviceable broken side panel or partition panel & supply and fix new side panel of 18mm thick plywood with commercial face veneers on both sides exterior grade of size 660x300mm with teak wood beading of 20mmx6mm thick duly polishing to the beading complete all as specified and shown on drawings.

Removing the existing unserviceable broken shutter and supply and fix shutter of size 370x620mm and 18mm thick one side teak veneer with providing teak wood edging 20x6mm thick around the shutter complete all as specified and shown on drawings.

Supply and fix new continous piano type hinge of mild steel with width of flap 35mm (when open) and 620mm long complete all as specified as directed.

Supply and fix new chromium plated anodised knob of 40mm complete all as shown and directed.

Removing the existing unserviceable broken top and supply and fix top of size 1200x300x18mm thick OST plywood with veneers complete all as specified and shown on drawing.

Removing the existing unserviceable broken inside shelf and supply and fix of 280mmx760mmx18mm thick plywood commercial including providing 20x6mm thick teak wood edging of the front side of shelf providing teak wood stiffener of 25mmX25mm for supporting the shelves complete all as specified and shown on drawing Note : Each shelf measured and paid separately for payment purpose.

Removing the existing unserviceable broken bottom and supply and fix second class teak wood bottom of size 1200mmx300mmx20mm thick complete all as specified and shown on drawing.

Removing the existing unserviceable broken leg and supply and fix teak wood leg of size 40mmx25mm duly polished with two or more coats of french polish alround complete all as specified and shown on drawing.

Removing the existing unserviceable broken rail stiffener at bottom for fixing of legs and supply and fix teak wood rail stiffener of size 50mmx25mm thick for fixing of legs complete all as specified and shown on drawing. Drg No. FD 45 & FD-237

Material and labour for polishing to the repaired Book case duly preparing the old and new wooden surfaces complete all as specified and as directed.

SIDE BOARD, FD - 26 , FD1112 & 371 Removing the existing unserviceable broken back and supply and fix 6 mm thick commercial plywood complete all as specified and shown on drawing.

Removing the existing unserviceable broken side panel and supply and fix side panel of 18 mm thick one side teak plywood exterior grade with teak wood edging of 20 mm x 6 mm thick all around the shutter on the front side of side panel duly polishing complete all as specified and shown on drawing.

Removing the existing unserviceable broken shutter & supply and fix shutter of 18 mm thick 400x590mm size one side teak plywood with teak wood edging of 20 mm x 6 mm thick all around the shutter on the front side duly polishing the teak wood edge complete all as specified and shown on drawing.

Supply and fix mild steel butt hinges of 75 mm long to the cabinet shutter complete all as specified and shown on drawing.

Supply and fix chromium plated anodised knob of 40 mm complete all as specified and shown on drawing.

Removing the existing broken top and supply and fix top of 18mm thick one side teak plywood complete all as specified and shown on drawing.

Removing the existing unserviceable broken inside shelf and supply and fix inside shelf of 12 mm thick plywood with commercial face, both sides with 12 x 6 mm teak wood beading to the front side of shelf duly polishing to the teak wood beading complete all as specified and shown on drawing. Drg No. FD - 26 & FD371

Removing the existing unserviceable broken drawer and supply and fix new drawer made out of 12mm thick one side teak of size 250mmx450mm duly polished with two or more coats of french polish alround complete all as specified and shown on drawing.

Removing the existing unserviceable broken bottom and supply and fix bottom of 20 mm thick teak wood plank complete all as specified and shown on drawing.

Removing the existing unserviceable broken leg of side board and supply and fix teak wood leg complete all as specified and shown on drawing.

Removing the existing unserviceable broken rail stiffener at bottom side for fixing legs and supply and fix teak wood rail stiffener of size 50 mm x 25 mm thick for fixing of legs complete all as specified and as shown on drawing.

Material and labour for polishing to the repaired side board duly preparing the old and new wooden surfaces complete all as specified and as directed.

TABLE DINING ORs FD-165 Removing the existing unserviceable damaged table top with aluminium sheet from the table and supply & fix table top of size 1900 mm x 685 mm x 18 mm thick plain particle board (phenyl bonded) exterior grade with 22 gauge aluminium sheet cover over top of sheet complete all as specified and as directed.

Removing the existing unserviceable damaged MS square pipe of steel frame and supply & fix 32mm dia MS square pipe of 1.8mm gauge by welding and applying two coats of synthetic enamel Olive green paint over one coat of primer complete all as specified and shown on drawing.

Material and labour for preparing the old steel surfaces of table dining ORs and applying one coat of synthetic enamel paint of approved colour over a coat of red oxide primer with machine spray complete all as specified and as directed.

CHAIR DINING (FD-16, FD-228 & FD-279) Supply and fix teak wood rear leg 55mm x 30mm (square) and 65mm x 45mm (round) and removing the existing unserviceable/broken rear leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood front leg of size 55x30mm (Square) and 45mm x 45mm (round) and removing the existing unserviceable/ broken front leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood front/back rail of size 65 mm x30 mm and removing the existing unserviceable/broken back rail complete all as specified and shown on drawing and as directed.

Supply and fix teak wood side rail of size 65mmx30mm of seat frame and removing the existing unserviceable/broken side rail of seat frame complete all as specified and shown on drawing and as directed.

Supply and fix teak wood beading of size 20mm x 15mm for canning including drilling holes at 12.5mm centre to centre and removing the existing unserviceable/broken beading complete all as specified and shown on drawing and as directed.

Supply and fix teak wood stiffener of size 25mmx 20mm and removing the existing unserviceable/broken stiffener complete all as specified and shown on drawing and as directed.

Supply and fix teak wood back rest of size 45 mm x 15 mm to the back frame and removing the existing unserviceable/ broken back rest frame complete all as specified and shown on drawing and as directed.

Material and labour for polishing to repaired chairs duly preparing the old and new surfaces and including providing hard rubber ring screwed to the legs complete all as specified and shown drawing and as directed.

CHAIR EASY (FD-202, FD-229 & FD-17) Supply and fix teak wood rear leg of size 55mm x 25mm and providing hard rubber ring screwed to bottom of leg and removing the existing unserviceable/broken rear leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood front leg of size 55mm x 25mm and providing hard rubber ring screwed to botom of leg and removing the existing unserviceable/broken front leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood arm rest of size 65mm x 25mm and removing the existing unserviceable/broken arm rest complete all as specified and shown on drawing and as directed.

Supply and fix teak wood horizontal side of back rest frame of size 55mm x 20mm and removing the existing unserviceable/ broken horizontal side of back rest frame complete all as specified and shown on drawing and as directed.

Supply and fix teak wood vertical side of back rest frame of size 55mm x 20mm and removing the existing unserviceable/ broken vertical side of back rest frame complete all as specified and shown on drawing and as directed.

Supply and fix teak wood long side of seat frame of size 70mmx40mm and removing the existing unserviceable / broken long side of seat frame complete all as specified and shown on drawing and as directed.

Supply and fix teak wood short side of seat frame of size 70mm x 25mm and removing the existing unserviceable / broken short side of seat frame complete all as specified and shown on drawing and as directed.

Supply and fix teak wood beading of size 20mm x 15mm for canning including drilling holes at 12.5 mm centre to centre and removing the existing unserviceable/broken beading complete all as specified and shown on drawing and as directed.

Material and labour for polishing to repaired chairs duly preparing the old and new surfaces and including providing hard rubber ring screwed to the legs complete all as specified and shown on drawing and as directed.

CHAIR WOODEN BOTTOM (FD-55, FD-225 & FD-285) Supply and fix teak wood rear leg of size 55 mm x 30mm and removing the existing unserviceable /broken rear leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood front leg of size 30mm x 55mm and removing the existing unserviceable/ broken front leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood back rail of size 50mm x 35mm and removing the existing unserviceable/broken back rail complete all as specified and shown on drawing and as directed.

Supply and fix teak wood rail of size 30mm x 65mm of seat frame and removing the existing unserviceable/broken rail of seat frame complete all as specified and shown on drawing and as directed.

Supply and fix 6mm thick ply wood seat plank with commercial face veneers on both sides including drilling holes and removing the existing unserviceable/broken seat plank complete all as specified and shown on drawing and as directed.

Supply and fix teak wood stiffener of size 20mm x 25mm and removing the existing unserviceable/broken stiffener complete all as specified and shown on drawing and as directed.

Supply and fix teak wood back rest of size 50 x 15 mm to the back frame and removing the existing unserviceable/ broken back rest frame complete all as specified and shown on drawing and as directed.

Material and labour for polishing to repaired chairs duly preparing the old and new surfaces and including providing hard rubber ring screwed to the legs complete all as specified and shown on drawing and as directed.

CHAIR WRITING (FD-20, FD-250 & FD-280) Supply and fix teak wood rear leg of size 30x55mm (round / square) and removing the existing unserviceable/broken rear leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood front leg (round/square) of size 30mm x 55mm and removing the existing unserviceable/ broken front leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood back rail of size 50mm x35mm and removing the existing unserviceable/broken back rail complete all as specified and shown on drawing and as directed.

Supply and fix teak wood rail of size 65mm x 30mm of seat frame and removing the existing unserviceable/broken rail of seat frame complete all as specified and shown on drawing and as directed.

Supply and fix teak wood arm rest of size 60 mm x 25mm and removing the existing unserviceable/broken arm rest complete all as specified and shown on drawing and as directed.

Supply and fix new teak wood beading of size 20 mm x 15mm for canning including drilling at 12.5 mm centre to centre and removing the existing unserviceable/ broken beading complete all as specified and shown on drawing and as directed.

Supply and fix teak wood stiffener of size 25 mm x 20mm and removing the existing unserviceable/broken stiffener complete all as specified and shown on drawing and as directed.

Supply and fix teak wood back rest of size 50 mm x 15 mm to the back frame and removing the existing unserviceable/ broken back rest frame complete all as specified and shown on drawing and as directed.

Material and labour for polishing to repaired chairs duly preparing the old and new surfaces and including providing hard rubber ring screwed to the legs complete all as specified and shown on drawing and as directed.

COMMON ITEMS FOR CHAIRS Supply and canning with plastic cane 1.8mm wide for weaving and 3mm wide for borders for chairs of all types including couch with detachable chair, bin soiled linen, and stool dressing as per Godrej pattern and removing the existing unserviceable/broken plastic cane complete all as specified and shown on drawing and as directed.

Supply and fix with screws of Teak wood bracket of size 65mmx65mmx25mm for chairs complete all as specified and as directed

CHAIR VERANDAH (FD-19/359) Supply and re-weaving with 3 mm wide plastic cane to seat & back of chair verandah duly removing the existing unserviceable plastic cane complete all as specified, as shown on drawing and as directed.

Supplying and fixing new 10mm dia Mild Steel rod by welding between back side and seat duly Removing the existing broken rod complete all as specified, as shown on drawing and directed.

Material and labour for preparing the old steel surfaces and painting with two coats of white synthetic enamel paint with machine spray and providing 4 Nos new plastic shoes including taking down the broken shoes complete all as specified, as shown on drawing and as directed.

CHAIR VARANDAH ALUMINIUM (FD-259) Material and labour for weaving with plastic tube cane conforming to IS of 8mm dia to chair verandah (weight not less than 1.3 kg per chair) fixing with new bolts ,nuts, clamps, clits, rivets, flat stays screws and washers duly resetting, tightening the chair and removing the existing unserviceable plastic tube cane complete all as specified and as directed.

CHAIR DINING (OFFRS MAP) FD/MAP-II/04 Removing the unserviceable front leg and supply & fix new teakwood front leg of size 50mm x 35mm x 450mm and complete all as specified and shown on drawing and as directed.

Removing the unserviceable Rear leg and supply & fix new teakwood rear leg of size 50mm x 35mm x 950mm and complete all as specified and shown on drawing and as directed.

Removing the unserviceable back verticle strips and supply & fix new teakwood back verticle strips of size 15x30x550mm duly made to shape and complete all as specified and shown on drawing and as directed.

Removing the unserviceable back rail and supply & fix new teakwood back rail of size 25mm x 90mm x 450mm and complete all as specified and shown on drawing and as directed.

Removing the unserviceable front & side rail and supply & fix new teakwood front & side rail of size 25mm x65mmx450mm and complete all as specified and shown on drawing and as directed.

Removing the unserviceable stiffeners and supply & fix new teakwood stiffeners of size 20mmx25mmx450mm and complete all as specified and shown on drawing and as directed.

Removing the unserviceable seat and supply & fix new teakwood seat of size 450mmx450mm made out of 12mm thick commercial plywood and complete all as specified and shown on drawing and as directed.

Removing the unserviceable seat cushion and supply & fix new seat cushion 75mm of 40 density alongwith new tapestry cloth duly fixed to the seat ply and providing white kora cloth to the bottom of the seat before fixed to the chair and complete all as specified and shown on drawing and as directed.

Removing the unserviceable teak wood stopper for seat and supply & fix new teakwood stopper fixed with main frame and legs of size 75mmx75mmx25mm and complete all as specified and shown on drawing and as directed.

Material and labour for polishing to repaired chairs duly preparing the old and new surfaces and including providing hard rubber ring screwed to the legs complete all as specified and shown drawing and as directed.

A.K. MARKETING ASSOCIATES

Mahesh Traders

BALAJISTEELINDUSTRIES

sandhya enterprises