Loading…
Loading…
Tender Value
₹7.1 L
EMD Value
₹17,700
Closing Date
8 Jul 2026, 12:00 pm
Similar tender results from the same govt authority in the past 3 years.
Assistant Executive Engineer
Office of the Assistant Executive Engineer, Transmission Sub Division, Nedumangad
Modification of existing quarters building and modification of meeting hall
2026_KSEB_856261_1
03/TSD-NDD/2026-27 dtd 17.06.2026
Open Tender
Civil Works - Buildings
90 days
Nedumangad
Please refer tender documents
6 documents required · 6 mandatory
₹1,770
Yes
₹17,700
17 Jun 2026
17 Jun 2026
9 Jul 2026
18 Jun 2026
8 Jul 2026
19 Jun 2026
18 Jun 2026 - 8 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | 15.28.2 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet (cost index(c) : 1.4766 included in Rate) | 210 | sq.m | 0.44 | ₹92.4 | BI01010001010000000000000515BI0100001113 |
| 2 | 14.46 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (cost index (c) : 1.4766 included in Rate) | 17.5 | sq.m | - | - | BI01010001010000000000000515BI0100001118 |
| 3 | 13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work (cost index(c) : 1.4766 included in Rate) | 73.56 | sq.m | 0.36 | ₹26.48 | BI01010001010000000000000515BI0100001122 |
| 4 | 15.19 : Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in- Charge. (cost index(c) : 1.4766 included in Rate) | 119.35 | kg | 0.6 | ₹71.61 | BI01010001010000000000000515BI0100001123 |
| 5 | 9.117.2 : Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in- chargeExtruded section profile size 42x50 mm (cost index(c) : 1.4766 included in Rate) | 10 | meter | 0.56 | ₹5.6 | - |
| 6 | 9.118.1 : Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi- chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter). (cost index(c) : 1.4766 included in Rate) | 3.2 | sq.m | 0.36 | ₹1.15 | - |
| 7 | 11.41.2 : Providing and laying vitrified floor tiles in
different sizes (thickness to be specified by the
manufacturer) with water absorption less than 0.08%
and conforming to IS : 15622, of approved make, in all
colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. (cost index(c) : 1.4766 included in Rate) | 54.4 | sq.m | 0.8 | ₹43.52 | - |
| 8 | 11.38 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. (cost index(c) : 1.4766 included in Rate) | 0.25 | sq.m | 1 | ₹0.25 | - |
| 9 | 17.7B : Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock,32 mm PTMT waste coupling of standard pattern, including painting of fittingsand brackets, cutting and making good the walls wherever required. WhiteVitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMTpillar cock. (cost index(c) : 1.4766 included in Rate) | 2 | Nos | 0.24 | ₹0.48 | - |
| 10 | 17.28.1.1 : Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete.Semi rigid pipe32 mm dia (cost index(c) : 1.4766 included in Rate) | 2 | Each | 0.8 | ₹1.6 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.62 MB
TenderdocNDDQuartermodification.pdf
Tender Documents • 1.59 MB
Checklist.pdf
Other Document • 0.31 MB
BidQustionare.pdf
Additional Documents • 0.26 MB
PQquestion.pdf
Additional Documents • 0.31 MB
BOQ_1447444.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid