GE/863/EWS-T-43/2019-20

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

Demolition Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified. and directed by Engr-in-Charge.

M& L for Pre-cast cement concrete block masonry with solid block exc 10 cm in width type C1 1:3:6 (20 mm graded stone agg) set in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

S & F structural Steel of Fe-410-W(Gde-E-250) Quality -B for Roof trusses,Purlines,wind tie including distance pieces,cleats etc complete all as specified and directed bt Engr-in-Charge.

M&L for 25mm th levelling course in Cement concrete 1:2:4 type B-0, (12.5 mm graded aggregate) complete all as specified and directed by Engr-in-Charge.

M&L for Vitrified ceramic light shade tiles, 10 mm thick (square/ rectangular) polished ,area of each tile not exc. 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for Vetrified ceramic light shade tiles, 10 mm thick (square/ rectangular) polished, in vertical surfaces, over and including 10 mm thick cement plaster in cement mortar 1:6 as backing of wall tiles etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete all as as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab 20-25 mm thick in floor (of size not less than 55 cm x 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing over and including cement screed bed 20 mm th in CM 1:6 complete all as specified.

M&L for machine cut kota stone slab 20-25 mm thick in skirting jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing over and including 10 mm thick cement plaster in cement mortar 1:6 as backing of wall tiles complete .as specified and directed by Engr-in-Charge.

M&L for Non-skid ceramic tiles,coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sq m but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete. as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for Glazed ceramic tiles, white tiles, in vertical surfaces, 300 X 200 X 7 mm thick over and including 10 mm thick cement plaster in cement mortar 1:6 as backing of wall tiles etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete.as specified and directed by Engr-in-Charge.

M&L for 50 mm thick Cement concrete 1:3:6 type C1, (20 mm graded aggregate), as in plinth protection, finishing cement concrete surface even and fair without using extra cement complete as specified and directed by Engr-in-Charge.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade floor finishes complete as specified and directed by Engr-in-Charge.

M&L for Sand filling under floors or in foundations including watering and consolidation complete as specified and directed by Engr-in-Charge.

M&L for 75 mm th Sub Base in Cement concrete type D-2, 1:4:8 (40 mm graded aggregate) complete as specified and directed by Engr-in-Charge.

M&L for taking down cement plaster, any description, including raking out joints, hacking for key, scrubbing down with water etc. complete as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 mixed with Liquid WPC, finished even and fair, complete as specified and directed by Engr-in-Charge. (Note : Liqiud WPC shall be measured and paid separately)

Supply only liquid water proofing compound, complete all as specified.

M&L for Preparation of new/old plastered surface ,complete removal of existing treatment of wall surface and applying two coat of oil bound distemper with hand roller over primer to receive distemper over Birla wall care putty complete as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment on walls including washing down, rubbing down and applying two coats of 100% weather resistant acrylic emulsion paint over a coat of primer Red border as specified. complete as specified and directed by Engr-in-Charge.

M&L for preparation of new/old wall surface, and applying two coat of white wash complete as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards( fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete as specified and directed by Engr-in-Charge.

S&F 10 mm thick PVC insulation panels with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceilling, including GI frame work for seamless celling grid frame work, size of grid 605 X 605 mm for false ceilling, hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 X 3 mm size 60 mm long complete as specified and directed by Engr-in-Charge.

Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete as specified and directed by Engr-in-Charge.

S&F for Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete as specified and directed by Engr-in-Charge.

Taking down and romoving Chowkats or frames not exc. 1.5 sq.m with shutter (without taking off shutters from the frames) complete as specified and directed by Engr-in-Charge.

Taking down and romoving Chowkats or frames exc 1.5 sq. m but not exc 4 sq. m with shutter (without taking off shutters from the frames) complete as specified and directed by Engr-in-Charge.

S&F Pressed steel frames size 125 x 60 mm for doors with one or more rebates incl. necessary fixing lugs, 100 mm long hinges welded with frams, lock strick plate, etc and filling hollow frames with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate complete as specified and directed by Engr-in-Charge.

S&F 2nd class hard wood 35 mm thick plain, framed, panelled shutters(any no of panels) with panels of timber flat on both sides (feather edge) or of veneered partical boaed medium density, wood pertical board with commercial face veneers; supply and fix two chowkats complete as specified and directed by Engr-in-Charge.

S&F 2nd class hard wood 30 mm thick Glazed and sketon shutters, open rebeated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SS Part-I, section 8, clause 8.24 (a) supplied and fited to chowkat complete as specified and directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC printed sheet & edges will be painted to match with printed sheet ,reinforced with M.S. Square tube, in opening as per specification & drawing complete as specified and directed by Engr-in-Charge.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading in the frame at site as per specification & drawing complete as specified and directed by Engr-in-Charge.

S&F Box type steel window with openable double shutter for glazing and mosquto proffing, including guard bar/grill all as shown on CE CHZ Zone TD-219c sheet 1/3 to 3/3 in repair complete after tacking down old one all as specified and directed by Engr-in-Charge.

S&F Box type steel ventilatorwith openable double shutter for glazing and mosquto proffing, including guard bar/grill all as shown on CE CHZ Zone TD-219c sheet 1/3 to 3/3 in repair complete after tacking down old one all as specified and directed by Engr-in-Charge.

S&F aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete as specified and directed by Engr-in-Charge.

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete as specified and directed by Engr-in-Charge.

M&L 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete as specified and directed by Engr-in-Charge.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete as specified and directed by Engr-in-Charge.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete as specified and directed by Engr-in-Charge.

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete as specified and directed by Engr-in-Charge.

S&F Brass knob 35-40 mm dia complete as specified and directed by Engr-in-Charge.

M&L two coats of synthetic enamel paint over one coat of pink primer including preparation on wood or wood based surfaces of any description on new or previously untreated surfaces exc. 10 cm width or grith complete as specified and directed by Engr-in-Charge.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer completeas specified and directed by Engr-in-Charge.

M&L one coats of synthetic enamel paint including preparation on steel or steel based surfaces of any description on old surfaces exc. 10 cm width or grith complete as specified and directed by Engr-in-Charge.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete as specified and directed by Engr-in-Charge.

S&F 100 mm Butt hinges, Medium weight, cold rolled mild steel, and fixed complete as specified and directed by Engr-in-Charge.

S&F 200 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete as specified and directed by Engr-in-Charge.

S&F 150 mm Aluminium handles, cast type, anodised complete as specified and directed by Engr-in-Charge.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete as specified and directed by Engr-in-Charge.

S&F Vitreous china wash down water closet pan (pedestal pattern), white, including chromium plated jet and flush pipe of polyethylene of low or high density or PVC 32 mm dia., plastic water closet seat closed pattern with cover and hinging device and trap with connection in repairs complete as specified and directed by Engr-in-Charge.

S&F 10 Ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any in repairs complete as specified and directed by Engr-in-Charge.

S&F Vitreous china wash basin with padestal, white, flat back, size 550 X 400 mm including fixing with brackets exclusive of fixing of supply and waste pipe and 32 mm chromium plate waste fitting with long screwed shanks and fly-nuts complete as specified and directed by Engr-in-Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm in repairs complete as specified and directed by Engr-in-Charge.

S&F Low density polyethylene (LDPE) pipes, 32 mm bore, of pressure rating 6 Kgf/ Sqcm as in waste pipe in repairs complete as specified and directed by Engr-in-Charge.

S&F Bib taps, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube fixed in repair complete as specified and directed by Engr-in-Charge.

S&F centre hole wash hand basin mixture pop-up cromium plated quarter turn complete as specified and directed by Engr-in-Charge. Approved Make given in appendix 'B' of tender Document.

S&F Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed to15 mm bore steel tube in repairs complete all as specified.

S&F Aluminium anodised tubular towel rail, 20 mm dia., D type, 60 cm long between flanges in repairs complete all as specified.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete as specified and directed by Engr-in-Charge.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete as specified and directed by Engr-in-Charge.

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete as specified and directed by Engr-in-Charge.

S&F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete as specified and directed by Engr-in-Charge.

Fixing only 15 mm water tubes, any grade, to walls and ceilings or laying in floors in repairs complete as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store complete as specified and directed by Engr-in-Charge.

S&F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete as specified and directed by Engr-in-Charge.

S&F 500 Ltrs capacity, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I, including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube and dismantling existing water tank and removing complete all in repair as specified and directed by Engr-in-Charge.

Taking down old U/S aluminium /copper point wiring (light , fan , socket, or power ) complete incl fittings and fixtures such as switches , ceiling rose ,pendents , regulators , sockets , light fitting etc and making good distrubed surfaces of walls floors etc complete all as directed by engr in charge .

Taking down U/S main switches , DB's /change over switch along with teak wood boards etc and making good the distrubed surfaces of wall /floors to match the existing surfaces all complete all as directed by engr in charge .

M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. complete all as directed by engr in charge .

(a) One light point point controlled by one switch

(b) One fan point point controlled by one switch

(c) One bell point point controlled by one switch

(d) One socket 3 Pin 5 A pin socket oulet 5Amps on same board with cables 1.5 Sqmm size

(e) One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size

All as per item No 1 here in before but for socket outlet 3 pin 15 Amps on independent board with cable size of 4 sqmm and earth continuity conductor cable of size 2.5 sqmm complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents

S&F switch piano flush type single pole one way 5/6 Amps.complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

S&F socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

S&F of switch piano15 Amp 230 Volt, flush button single pole one way complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

S&F socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

S&F ceiling rose surface tpe 3 terminals to be fixed on PVC block complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

M&L for lamp holder PVC/Polycarbonate typr with back plate suitable for batten fittings/angle fittings. complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

Supply and fixing LED lAMP 12 W system lumen (NOM) 600 with all accessories all as specified complete all as directed by engr in charge . Makes : Polycab cat part No-LLP0101055 or equivalent given in appendix 'B' of Tender Documents.

Supply and fixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumen (NOM) 2000 with all accessories all as specified and directed by Engg-in-Charge. Make: Polycab catalogue No. LDO0103031 or equivalant makes as listed in Appx 'B'

Supply and fixing recessed mounted LED slim panel luminaire 40 W system lumen (NOM) 6000K with all accessories all as specified and directed by Engg-in-Charge. Make: Polycab catalogue no. PMD0401018 or makes as listed in Appx 'B'

S&F LED Bulkhead light fitting 10Watt colour temprature cool white warm white housing high pressure die cast aluminium high pressure die cast front cover poly carbonatye front diffuser glass front cover acrylic front cover complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

Supply and PVC body sound proof Exhuast fan 300 mm size with single phase 230 Volt 900 RPM with louvers complete.making a hole in wall and after finishing work distrubed surface of wall complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

M & L for sub main wiring (surface) complete with Two single core 06 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia PVC casing capping accessories including elbow , tee one single run of 4 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

S&F sheet metal enclosure for DB, 240 Volt 8 way double door complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

Supply and fixing MCB SPN 40 Amps single phase 240 volts including making connection complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

Supply and fixing MCB SP 6-32 Amps single phase 240 volts including making connection complete all as directed by engr in charge . approved Makes given in appendix'B' of Tender Documents.

Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deept below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as specified directed and shown in electrical plate No 3 of SSR part -I including testing complete all as directed by engr in charge .

S&F GI tubing 20 mm dia light grade with all fittings laid in trenches for protection of earth wire complete all as directed by engr in charge .

Net Contract Sum will be after deducting Sch Of Credit Rs 17187.50

M/S H S ENTERPRISES

Pankaj Builders