07 Webel IDM BN4 ChairSofa 20 21 3

Amount

Supplying providing & installing High Back Executive Premium quality (larger size seat) Chair with multi point locking systems (with weight release), pneumatic Seat depth & Back Tilt adjustment, Armrest (with 4-D adjustable), adjustable Lumber support & head/neck rest adjustable. The cushioned seat is made of injection moulded plastic outer & inner. Plastic inner is upholstered with colour leatherette and moulded High resilience (HR) polyurethane foam of density 45±2 kg/cum & hardness load 16± 2kgf as per IS: 7888 for 25% compression.. The cushioned Back is made of PU foam with in situ moulded MS E.R.W round tube of size 1.9 ±0.03cm x 0.16 ± 0.0128cm. It upholstered with leatherette. The armrest top is moulded from polyurethane (PU) and mounted on to a 4 D adjustable type tubular armrest support made of ∅ 3.81Cm x0.2 cm thk. MS E.R.W. tube having chrome plate finish The armrest height 4 D adjustable up to 6.5 ± 0.5cm in 5 steps. The adjustable tilting mechanism is designed with the following features: i) 3600 revolving type. ii) Front- pivot for tilt with feet resting on ground and condition adjustable lumber support ensuring more comport. iii) Tilt tension adjustment can be operate in seating position. Iv) 5- position tilt limiter giving option of variable tilt angle to the chair. iv) seat/ back tilting ratio 1:2 v) The mechanism housing is made up of HPDC aluminium (aluminium alloy 63400-WP or IS: 733 & IS IS: 733 & 1285:2002) 8-10 stages anti rust treatment and shall be powder coated with Epoxy polyester in Glossy or matt finish to a thickness of 60 to 70 microns. Seat depthC51:C52 adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0cm minimum. Back frame support is connected to the Up/Dn mechanism housed in plastic T spine. It can be adjusted in the range of 7cm for the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0cm. The pedestal & castor base is high pressure Die cast powder coated (with Epoxy polyester in Glossy or matt finish to a thickness of 60 to 70 microns or chrome plate finish ) aluminium & fitted with 5nos. twin wheel castors. The pedestal is 65cm (minimum). Pitch centre dia (75cm with castors). 5 nos twin wheel castors are injection moulded in plastic having 6.0cm wheel diameter and assembled to pedestal. The visitor tubular frame is cantilever type & made of ∅ 2.54 cm x 0.2cm thk S.S. tube. The back connected to frame through chrome plated high pressure die cast connector piece. The lumber support consist of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of lumber pad can be adjusted through two projecting knobs provide on the rear side of pad. The neck rest assembly consist of propylene pad with moulded polyurethane foam & covered with leatherette fabric. Neckrest assembly has adjustment of 4.2 cm & rotation adjustment of overall 760.The above chair should be as per specification and sample approved by client. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

Supplying providing & installing medium Back Executive Premium quality (larger size seat) Chair with multi point locking systems (with weight release), pneumatic Seat depth & Back Tilt adjustment, Armrest (with 4-D adjustable), adjustable Lumber support adjustable. The cushioned seat is made of injection moulded plastic outer & inner. Plastic inner is upholstered with leatherette and moulded High resilience (HR) polyurethane foam of density 45±2 kg/cum & hardness load 16± 2kgf as per IS: 7888 for 25% compression.. The cushioned Back is made of PU foam with in situ moulded MS E.R.W round tube of size 1.9 ±0.03cm x 0.16 ± 0.0128cm. It upholstered with leatherette. The armrest top is moulded from polyurethane (PU) and mounted on to a 4 D adjustable type tubular armrest support made of ∅ 3.81Cm x0.2 cm thk. MS E.R.W. tube having chrome plate finish The armrest height 4 D adjustable up to 6.5 ± 0.5cm in 5 steps. The adjustable tilting mechanism is designed with the following features: i) 3600 revolving type. ii) Front- pivot for tilt with feet resting on ground and condition adjustable lumber support ensuring more comport. iii) Tilt tension adjustment can be operate in seating position. Iv) 5- position tilt limiter giving option of variable tilt angle to the chair. iv) seat/ back tilting ratio 1:2 v) The mechanism housing is made up of HPDC aluminium (aluminium alloy 63400-WP or IS: 733 & IS IS: 733 & 1285:2002) 8-10 stages anti rust treatment and shall be powder coated with Epoxy polyester in Glossy or matt finish to a thickness of 60 to 70 microns. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0cm minimum. Back frame support is connected to the Up/Dn mechanism housed in plastic T spine. It can be adjusted in the range of 7cm for the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0cm. The pedestal & castor base is high pressure Die cast powder coated (with Epoxy polyester in Glossy or matt finish to a thickness of 60 to 70 microns or chrome plate finish ) aluminium & fitted with 5nos. twin wheel castors. The pedestal is 65cm (minimum). Pitch centre dia (75cm with castors). 5 nos twin wheel castors are injection moulded in plastic having 6.0cm wheel diameter and assembled to pedestal. The visitor tubular frame is cantilever type & made of ∅ 2.54 cm x 0.2cm thk S.S. tube. The back connected to frame through chrome plated high pressure die cast connector piece. The lumber support consist of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of lumber pad can be adjusted through two projecting knobs provide on the rear side of pad. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

Supplying providing & installing visitor Chair (Size: W60.9cm x depth 64.2cm.x Height 98.2cm Seat Height 44.8cm. The dimension are variation within ± 1.cm are normal) with multi point locking systems (with weight release), pneumatic Seat depth & Back Tilt adjustment, Armrest (with 2-D adjustable). The cushioned seat is made of injection moulded plastic outer & inner. Plastic inner is upholstered with Fabric and moulded High resilience (HR) polyurethane foam of density 45±2 kg/cum & hardness load 16± 2kgf as per IS: 7888 for 25% compression.. The cushioned Back is made of PU foam with in situ moulded MS E.R.W round tube of size 1.9 ±0.03cm x 0.16 ± 0.0128cm. It upholstered with fabric. The armrest top is moulded from polyurethane (PU) and mounted on to a 2 D adjustable type tubular armrest support made of ∅ 3.81Cm x0.2 cm thk. MS E.R.W. tube having chrome plate finish The armrest height 2 D adjustable up to 6.5 ± 0.5cm in 5 steps. The adjustable tilting mechanism is designed with the following features: i) 3600 revolving type. ii) Front- pivot for tilt with feet resting on ground. iii) Tilt tension adjustment can be operate in seating position. Iv) 5- position tilt limiter giving option of variable tilt angle to the chair. iv) seat/ back tilting ratio 1:2 v) The mechanism housing is made up of HPDC aluminium (aluminium alloy 63400-WP or IS: 733 & IS IS: 733 & 1285:2002) 8-10 stages anti rust treatment and shall be powder coated with Epoxy polyester in Glossy or matt finish to a thickness of 60 to 70 microns. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0cm minimum. Back frame support is connected to the Up/Dn mechanism housed in plastic T spine. It can be adjusted in the range of 7cm for the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0cm. The pedestal & castor base is high pressure Die cast powder coated (with Epoxy polyester in Glossy or matt finish to a thickness of 60 to 70 microns or chrome plate finish) aluminium & fitted with 5nos. twin wheel castors. The pedestal is 65cm (minimum). Pitch centre dia (75cm with castors). 5 nos twin wheel castors are injection moulded in plastic having 6.0cm wheel diameter and assembled to pedestal. The visitor tubular frame is cantilever type & made of ∅ 2.54 cm x 0.2cm thk S.S. tube. complete in all respect. All floors & roof. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

SOFA : a) Supplying, fixing of best & premium quality sofa with armrest-LH & Armrest-RH for Under structure: Seat & Body under structure is made of combination of water proof plywood & pinewood members. Plywood is 12± 1mmthk. (moisture resistance & termite proof as per IS:303) & pine wood are cross section (22x64, x22x 40, x22x 100 & 34 x 64)mm are without major knots & defects on the surface. 3.8mm zigzag spring asly. Is mounted on the seat structure with spring mounting plastic clip for support & additional cushioning purpose. Paper coated MS rod is connected with all the spring with clips to give strength to the spring. Non-woven fabric is stapled on the seat structure frame above the spring asly. To avoid the tearing of seat PU foam with the surface contact of metal spring. Complete under structure is made by gluing, nailing & stapling. 3mm MDF & 2mm cardboard is stapled on the structure for PU foam sticking surface or for upholstery stapling reference. Back Top Cushion & Armrest under structure is made of combination is 12± 1mm, 6± 1mm plywood & pine (moisture resistance & termite proof as per IS:303) wood of 22x40 mm & combination 12± 1mm, 6± 1mm plywood, 3mm MDF & pine wood 22x40 for small corner with gluing & stapling. Two number of cushion belts are provide in the back rest plywood for enhanced comfort. Powder coated MS hook of 1.2mm thk. Are mounted on the back side of cushion for mounting the cushion with the body structure

b) Foam: Seat is made of PU foam with density 28Kg/cum. With an additional top layer of super soft PU foam with density 32Kg/cum. Recron sheet of 200GSM is wrapped & glued above this seat top foam. Seat front bottom vertical surface is glued with the PU foam with density 28kg/cum. Side vertical surface, body front taper vertical, back vertical surface & top horizontal surface is glued with PU foam with density 28kg/cum. Back Top Cushion is made of two layers of super soft PU foam with density 32Kg/cum. One additional layer of memory foam of density 70kg/cum given on the super soft foam layers in the backrest cushion for enhanced comfort. Recron sheet of 200GSM or leatherette option is wrapped & glued above this foam. Armrest is made of super soft PU foam with density 32Kg/cum. . Recron sheet of 200GSM or leatherette option is wrapped & glued above this foam

c) Upholstery: Seat, Armrest & Back Top Cushion Top upholstery is made in the dual tone colour with polyester pattern fabric & leatherette option. Leg: Back top Cushion are fitted with the seat & body structure with the M6 Butterfly nut & washer on top surface & MS hook on taper front body structure.(1no Cushion for1 seater sofa) Leg: Plastic PP moulded legs are used & fitted at the bottom surface with the chipped screws. Before fixing legs no- woven fabric is stapled on the bottom surface to cover the structure. The products should be tested as per BIFMA standards. The product should have ISO 9001:2000 and ISO 14001-2004, OHSAS 18001:2007 certifications, BIFMA SILVER or FIRA & IGBC Green GREENGUARD certified. The above modular partition should be as per specification and sample approved by client. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary. services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

d) 3 Seater Sofa Size- Total width/ Length 3 seater 2010mm x Total Depth 900mmx Total Height 800mmx Seat depth 570mmx Seat Height 465mmx Seat- Back Angle 1050 x leg Height 23mm.

e) 2 Seater Sofa Size- Total width/ Length 2 seater 1340mmx Total Depth 900mmx Total Height 800mmx Seat depth 570mmx Seat Height 465mmx Seat- Back Angle 1050 x leg Height 23mm.

Eurocoustic Products Ltd

ADARSH INFRAINTERIO PVT LTD