ANAKKARANAM DWSS IN KANJIRAPUZHA GRAMA PANCHAYAT

Amount

Borewell ,pipeline,water tank ,pumb house

OD20299/2022-2023:site investigation charges to identify suitable site for digging borewell including all charges

OD22649/2022-2023:Conducting yield test to ascertain the yield of tube well by ground water department including all charges complete

OD20304/2022-2023:Digging borewell of 150mm dia including all charges

OD20305/2022-2023:supplying and fixing PVC casing pipe of 180mm dia 6kg/cm2 including all charges

OD20306/2022-2023:Supply and errect readymade ferrocement pump house of size 1.5x1.5x2.1m with following specification RCC post shall be fixed in PCC 1:3:6 of size 45x45x45cm, Foundation alround with solid block masonry with CM 1:6 of 30x40cm, size ferrocement wall of 1.5mx2.10m of thickness 25mm, ferrocement triangular type roof made of ferrocement slab of thickness 25mm, MS door of size 75x210cm with 1mm thick MS sheet and suitable GI frames and painting with two coats of synthetic enamel paint over a coat of iron primer with suitable locking arrangement and a pad lock of 5 Lever, MS ventilator of size 60x45cm, Flooring with cc 1:4:8 75mm thick and plastered over 12mm thick cement plaster 1:4 and neat cement flushing coat and all wall surfaces and roof shall be painted with two coats of exterior emulsion paint over coat of primer

18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

OD401938/2023-2024:Providing and fixing HDPE pipes includings joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia as per IS 4984/2016 modified as 50.18.9.4.2

18.10.3:Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work- Exposed on wall25 mm dia nominal bore

18.10.4:Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work- Exposed on wall32 mm dia nominal bore

18.17.2:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

18.19.2.1:Providing and fixing gun metal non-return valve of approved quality (screwed end): 32 mm nominal boreHorizontal

OD27023/2022-2023:Providing and fixing foundain post tap, concreting the base including labour charges etc complete.

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.7.2:DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD20309/2022-2023:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels,including lettering & fixing.Granite of any colour and shade Area of slab upto 0.50 sqm

7.2.1:Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)

13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing

Bidder Name

T. RAMARAJAN