Construction of Primary Health Center Building Level.II at Delath in Tehsil Rampur Distt. Shimla H.P.

Amount

Excavations in foundations, trenches etc. in earth work, lift upto 1.50 meters stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm layers, when required in to plinths side of foundations etc. consolidating each deposited layer. (PW-30%, JW-30%, S.B.W 40%) as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Filling in plinth with sand under floors including watering ramming consolidation and dressing complete as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Poviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 20mm nominal size.) as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10( 1 cement :5 sand : 10 graded stone aggregate 40mm nominal size) and curing complete includingb cost of form work in foundation and Plinth. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and Laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 sand): 4 graded 12.5mm nominal size.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approval quality using 1.7 kg. Per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of colth lightly coaked in kerosene oil as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing under layer for plinth protection of 75mm thick surface free from mortar drop, dust, loose materials and other foreign matters sand papering smooth as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Making plinth protection 50mm thick of cement concrete 1:3:6( 1 cement : 3 coarse sand (zone-III): 6 graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with finesand, including necessary excavation , levelling & dressing finishing the top smooth. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22cm in cement mortar 1:6 (1 Cement : 6 sand ) and inside plastrering with cement palster 1:3 (1 cement :3 sand ) including earth work and laying 10cm cement concrete in 1:5:10( 1 Cement :5 sand :10 graded stone aggregate ) of 40mm nominal size) and 7.5 cm cement concrete 1:2:4(1 Cement : 2 sand :4 graded stone aggregate of 20mm nominal size) and finished with a floating coat of neat cement conmplete as per standard design. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Centering and shuttering inlcuding strutting, propping etc. and removal of form for as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge. Foundation, footings, bases of columnsetc. For mass concrete.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Suspended floors, roofs, landing, balconies and access paltform. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Lintels, beams, plinth beams,girders, bressumers and cantilevers. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Columns, Pillars, Piers, Abutments, Posts and Struts.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Stairs, ( exculding landings)except spiral- staircase.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Edges ofslabs and breaks in floors and walls under 20 cm wide as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge. .

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:1.5:3 ( 1 cement :1.5 coarse sand): 3 graded stone aggregate 20mm nominal size) as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge. Foundations, footings, basis of columns and as walls ( any thickness) partitions and the like including attached pillasters butteresses, plinth and string courses and the like. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantelivers up to floor all levels as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Stair cases except spiral staircases excluding landing but including preparing of top surface and finishing of nosing up to floor all levels as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15◦ landings, blaconies, shelves, chajjas, lintels, bands, plain window sills , staricases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3( 1 Cement : 1.5 coarse sand): 3 graded stone aggregate 20mm nominal size.) as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Steel reinforcement for R.C.C work including straightening , cutting, bending, placing inposition and binding all complete above plinth level Mild steel and Medium Tensile steel bars all complete upto plinth level.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Brick work with common burnt clay F.P.S (non modular)bricks of class designation 7.5 in superstructure avobe plinth level up to floor V level in all shapes and sizes in:-Cement Mortar 1:6 (1 cement : 6 coarse sand) as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Half brick masonry with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand) as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Stone masonry work in cemnt mortar in foundation complete as per drawing and technical specifications of clauses 702 , 704 1202 and 1203 . Random rubble masonry in in cemnt mortar 1:6 as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows, including black enamelled iron but hnges with necessary screws 40mm thick with 2nd class deodar wood as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing aluminium sliding door bolts ,ISI marked anodise (anodic coating not ess than grade AC 10 as per IS : 1868), trasparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16mm as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing aluminium tower bolts ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), trasparent or dyed to required colour or shade, with nuts and screws etc. complete as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge. 250x10mm size as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

150x10mm size as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

100x10mm size as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing aluminium handles ,ISI marked anodised (anodic coating not ness than grade AC 10 as per IS : 1868), trasparent or dyed to required colour or shade, with nuts and screws etc. complete as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge. 125mm as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

100mm as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing M.S. hooks and eye 150m including carriage of material within all leads and lifts and as per HP.PWD. Specifications of 1990 volume-I and as per direction of Engineer - in -charge.

Providing and fixing MS single action f bright finished with necessary screws etc. complete. 150mm as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing oxidised M.S safety haspe and staples bright finished with necessary screws complete 150mm as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing MS safety haspe and staples bright finished with necessary screws etc complete. 150mm as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing bright finished hanging type floor door stopper, ISI marked , marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc.complete Twin rubber stopper as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. Brass screws and PVC sleeve etc., whereever necessary complete 20mm dia.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing 40x5mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts. Nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm niminal size). as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing 35mm thick factory made laminated veneer lumber door shutter conforming to IS :14616 and TADS 15:2001 (Part B), fixing with butt hinges of requiredsize with necessary screws, all complete as per directions of engineer-in-charge and paneling with panels of :12mm thick one side Pre-laminated particle board (decorative lamination on one side and other isdes balancing lamination)grade - 1, medium density flat pressed , three layer particle PT-I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS :848 and pre-laminated conforming to IS : 12823, Grade -1, Type II marked: as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and laying 19 mm thick commercial board shutters with hard wood edging and PGI sheet linning inside of shutter of approved size including bright finished iron but hinges etc. complete as per detailed arch. Drawing for the work. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing wire gauge shutters using galvanised M.S. gauge of I.S. Gauge designation 85 G. with wire of dia o.56 mm for doors and windows : 40mm thick 2nd class deodar woodas per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Steel work welded in built up sections, trusses and framed work, including cutting hoisting , fixing in position and applying a priming cost of red lead paint in trusses and tressed purlins in buildingsas per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

In grating framed guard bars, ladder, railing, bracket, gates and similar work as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead Primer complete as per the instruction of Engineer - in - charge (Base members of steel work shall be measured &paid separtely)as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm. Dia welded in straight length over M.S flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat &balulsters of railings shall be measured & paid separetely) as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Marble work (table rubbed and polished )in steps jambs, walls , pillars and other plain work in cement mortar 1.2 ( 1 white cement : 2marble dust) with an admixture of pigment to match the marble shade : Baroda Green Marble as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and laying 20mm (twenty five milimetre) thick automatic hydraulically compressed and polished terrazzo tiles (30x30cm size of approved shade) ISI marked No. IS 1237. with marble of specified size or as required as per detailed drawing laid in floors treads of steps landings on a bed of 25cm average thickness of cement mortar 1:6 (1 cement ;6 sand ) jointed with neat cement slurry mixed with pigment ot match the shade of tiles (whereverrequired ) including rubbing and polishing to required shades complete. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and laying 20mm (twenty milimetre)thick automatic hydraulically compressed and polished terrazzo tiles of approved size fixed on walls upto all heights on 10mm thick cemnt plaster 1:3(1 cement :3 sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever require) including rubbing and finishing to required shade complete.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and Polishing complete with base of cement mortar 1:4 ( 1 cement :4 coarse sand): as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Kota stone slabs 20mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average thick cement mortar 1:3(1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slbs, including rubbing and polishing complete.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White , Ivory, Grey Fume Red Brown , laid on 20mm thick cement 1:4 ( 1 Cement : 4 coarse sand), Jointing with grey cement surry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

White glazed tiles of specified size 6mm thick in skirting , risers of steps and dado laid over 12mm thick cement plaster 1:3 ( 1 cement : 3 sand ) jointed with white cement slurry as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing 0.60mm (zero point six zero milimetre) thick prepainted steel sheet roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster (RNP) organic coating 20 microns over 5 primer coating to back coat of plyester of 5 microns primer coating including fixing with prepainted iron Joe L hooks bolts and nuts 6 mm diameter with prepainted limpet and rubber washer complete with all accessories as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing ridges or hips 60cm ( sixty milimetre) overall with 0.60mm ( zero point six zero milimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular plyester modified (RMP) organic coating of 20 microns over 5 microns primer coating + back coat of polyester of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm dia and prepaided H.I. limpet and bitumen washers with all accessories completeas per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing valleys 90 cm (ninety centimetre)over all in pre-painted steel sheet in roofing with hot dip metallic zinc coated sheets with the top coat of regular modified polyester (RMP) organic caoting of black coat of polyster of 5 microns over 5 microns primer caonting fixing with prepained iron J or L hookes bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing 15 cm wide , 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water rain water pipes complete . 0.80 mm thick coatng not less than 275gm/m. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing on wall face PVC(D- Plast ) rain water pipe of 110 mm ( one hundred milimetre)dia of working pressure not less than 4.5kg per sqm, including filling the joints with approved adhesive complete as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing on wall faces PVC ( D- plast ) accessories for rain water pipes inluding filling the joints with approved adhesives complete as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge. 110 mm dia PVC Plain Bend as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

110 mm dia PVC Shoe as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

P/F PVC Clamps for 110 mm dia pipe as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

6 mm cement plaster of mix 1:3 ( 1 cement : 3 fine sand ) as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

15 mm thick cement plaster in single coat on the fair side of brick /concrete /stone walls for interior plastering up to flor all level including arises internal rounded angles chamfers and /or rounded angles not excedding 80 mm in girth and finished even and smooth : in cm 1: 6 as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

15mm thick cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering up to floor all level including arises internal rounded angles cahmfers and /or runded angles not exceeding 80 mm in girth and finished even and smooth: in cm 1: 6 as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the palstered wall surface to prepare the surface even and smooth complete as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade ( Company Depot Tinted )with silicon additives New work ( two of more coats applied @ 1.43 litre/10 sqm. Over and including priming coat of exterior primer applied @0.90 Litre / 10sqm.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Distempering with 1st quality acrylic distemper ( ready mixed ) having VOC content less than 50 gms/litre, of approved manufacturer , of required shade and colour complete , as per manufacturer's specification. Two or more coats on new work as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr /10 sqm over an under coat of primer applied @ 0.80 ltr/ 10sqm of approved brand and manufacture as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Painting wood work with Deluxe Multi Surface Paint to required shade. Two or more coat applied @ 0.90 ltr /10 sqm over an under coat of primer applied @ 0.75 ltr/ 10sqm of approved brand and manufactureas per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing M.S cahnnels Door, windows frames manufactured from M.S section ISMC 75x40 mm & M.S. Flat 75x5 mm as per direction of Engineer -in-charge and drawing including hinges jambs bead and if required angle threshold M.S. Angle 50x25 mm welded or rigidly fixed by mechanical means with split end tailsto each jamb including steel butt hinges 25mm and provision of lacking arranement and shock observer as specified and applying a caot of approved steel primer after pretreatment of surface as directed by the Engineer -in -charge including carriage of material with all leads and lift. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Stone Filling under floor as per the direction of Engineer - in -charge including carriage of material with in all leads and lifts and other incidentals.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Earth work in rough excavation, banking excavated earth in layers not exceedign 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8 tonne and dressing up in embankments for floods banks marginal banks and guidebanks or filling up ground depression, lead upto 50m and lift upto 1.5m:All kinds of soil as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Earth work in rough excavation, banking excavated earth in layers not exceedign 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8 tonne and dressing up in embankments for floods banks marginal banks and guidebanks or filling up ground depression, lead upto 50m and lift upto 1.5m:All kinds of soil as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing weep hole in brick masonory/stone masonary/plain reinforced concret abutment wing wall, return wall with 10mm dia P.V.C pipe exterding through and full width of the structure with slop of 1:20 toword drawing face complete as per drawings and techninal specification. Clouse 614,709, 1204.3.7 as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Backfilling Behind R/wall as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and laying factory made chamfered edge Cement concrete paver blocks in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibrated method using PU mould, laid in require colour & pattern over 50mm thick compact bed of sand compacting and proper embeding /laying of inter locking paver blcoks into the sand bedding layers through vibratory compacting by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer- in Charge. 60mm thick cement conccrete paver block of M-35 grade with approved colour,design & pattern. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Centering and shuttering including strutting,propping etc. and removal of from for:Walls(any thickness) including attached pilasters, butteresses, plinth and string courses etc. upto plinth level. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Suspended floors, roofs, landings, balcoines and access platform as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering finishing and reinforcement- All work up to plinth level:1:2:4(1 cement:2 coarse sand ):4 graded stone aggregate 20mm nominal size) as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Centering and shuttering including strutting, propping etc, and removal of from for as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge. Suspended floors,roofs.landings, and access platform. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Edges of slabs and breaks in floors and walls as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Coursed rubble masonary (first sort ) with hard stone in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand )as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing to wall ceiling anf floor galvanised mild steel tube (Medium grade) tube fitting and clamp including making good the wall ceiling and floor including carriage of material in all leads and lifts as per direction of Engineer -in- Charge complete. 15 mm nominal bore,. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing to wall ceiling anf floor galvanised mild steel tube (Medium grade) tube fitting and clamp including making good the wall ceiling and floor including carriage of material in all leads and lifts as per direction of Engineer -in- Charge complete. 20 mm nominal bore,.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Making connection of GMS steel distribution branch with GMS tube 20mm to 40mm nominal bore by providing and fixing tee cutting and threading to pipes completeas per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Provinding and fixing P.V.C storage tank complete with 40mm (forty millimeters) nominal bore galvanished mild steel over flow tubes with fittings and mosquito proof coupling of approved municiple design 15 mm (fifteen millimetres) nominal bore ball valve and mosquito proof of size as required for inlet and let tube 2000 litres (Two thousand litters) net capacities storage tank as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipe. ISI marked including fixing awith approved adhasive etc complete 110mm dia as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

150mm dia as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing PVC double equal branch with access door complete in all respect 110mm dia as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

150mm dia as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing PVC cowl complete in all respect 110mm dia as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

150mm dia as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing PVC floor trap 110mm dia complete in all respect as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providng and fixing vitreos China wash down, water closet, (Anglo Indian Universal closet) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cemet mortar 1:1 (cement : 1 sand) (Seat and cover to be measured and paid for separately as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge. ):-

Providing and fixing plastic seat (soil/ Holow type) and cover for wash down water closet with C.P. Brass hings and rubber buffers. (i) Solid type: (a) White plastic seat and cover as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providng and fixing automatic flushing cistern with with a pair C.I. Or M.S brackets complete with fittings including C.I Syphonic appratus mosquitos proof lid C.P. brass union and coupling for connection with inlet, outlet and over flow pipes including cutting holes and making goood the same (Over-flow pipe to be measured and paid for separately). 10 Litres capacity. as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Provinding and fixing G.I inlet connection for flush pipe with W.C.pan- including carriage of materials in all leads and lifts as per direction of Engineer-in-charge completeas per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing vetreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting hole and making good the same but excluding fittings: Flat back 630mm X 450mm bore including carriage of materials in all leads and lifts as per direction of Engineer-in-charge complete including carriage of amterial withiin all leads and lifts ans as per Hp.PWD specification of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing vitreous China pedastal for form wash basin complete recessed at the back fot he the reception of pipes and fittingsas per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing kitchen sink with C.I. or M.S brackets painted white inlcuding cutting holes in walls and making good the same (a) White glazed fire clay sink 600mmx450mmx150mm size.as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing CP brass waste basin for wash or sink 32mm dia as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing M.I union for wash basin or sink 32mm dia as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing CP brass waste, and plug for glazed ware sinks, basin etc with long screwed shank and fly nut and fixed to steel pipe including vulcante plug brasschain and stud:- 32mm nominal bore as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing 600 x 450 mm (six into four hundred fifty milimetres) bevelled edge mirror of superoir glass mounted on 6mm (six milimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers including carriage of materials in all leads and lifts as per direction of Engineer-in- charges complete as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing chromium palted brass towel rail with C.P brass brackrets fixed to wooden cleats with C.P brass screws including carriage of materials in all leads and lifts as per direction of Engineer-in-charge complete 600x200mm as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing chromium plated brass soap dish complete fixed to wooden plugs with C.P brass screwas per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing C.P brass bib tap of approved make with capstan head 15mm (fifteen milimetre) dia as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing C.P brass pillar tap of approved make capstan head 15mm (fifteen milimetres) dia as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing PVC stop cocks : of approved make 15mm (fifteen milimetres)dia as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing PVC connection pipe with brass union 30 centimeter Length 15mm nominal bore as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing brass full way valve of approved make with wheel 15mm (fifteen milimetre) nimonal bore as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

20mm nominal bore as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Providing and fixing 110 mm X 90 mm. PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost cutting and making good the wall and floors etc complete as per HP.PWD specification of 1990 volume-I including carriage of material, labour tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-charge.

Construction main hole woith RCC top slab in 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 (1 cement : 4 sand : 8 cement mortar 1:3 (1cement : 3 sand) finished with a floating coat of neat cement andmaking channels in cement concrete 1:2:4 mix (1 cement :2 sand :4 graded stone aggregate 20 mm nominal size) finished smooth complete including curing, testing and excavation in earth work complete. Inside size 800 x800 x500 mm including C.I cover with frame light duty single seal pattern 455 x 610 mm internal diamension. Total weight of cover and frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15kg with 300 mm thick walls of square rubble masonry in cement mortar 1:3 (1 cement : 3 sand) as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge. Inside size 800 x 800 x 1000 mm including C.I cover with frame light duty single seal pattern 450 x 610 mm inertnal dimension. Total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg with 200 mm thickwalls of brick masonry using common burnt clay building bricks in cement mortar 1:3(1 cement : 3 sand) as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Inside size 1200 x 900 x 1000 mm C.I cover with frame (mediumduty) 500 mm internal diamesing. Total weight of cover and frame to be not less than 116 kg (weight of cove 58 kg and weight of frame 58 kg with 300 mm thick walls of square rubble masonry in cement mortar 1:3 (1 cement :3 sand) including carriage of amterials in all leads and lifts and as per directions of the Engineer-in-charge complete including carriage of material within all leads and lifts and as per HP.PWD specification of 1990 volume-I and as per direction of Engineer-in-charge.

Supply and fixing cast iron cover with frame of internal dimension 455x610mm rectulanguar C.I (light duty single pattern-I) the wieght of cover to be not less than 23.00 Kg as per HP.PWD specifications including hauling of materials through all modes of transportation within all leads and lifts and as per the entire satisfaction and directions of Engineer -in-Charge.

Nand Lal Thakur