Replacing the damaged roof sheets and Painting of DM Unit and other allied civil works in SA Plant of FACT (Cochin Division)

Replacing the damaged roof sheets and Painting of DM Unit and other allied civil works in SA Plant of FACT (Cochin Division)

Dismantling AC / GI / Tufflite / Aluminium/ Zincalum sheet roofing, side cladding etc and depositing the debris away from plant limit within a distance of 150 m.

Dismantling AC / Aluminium / Zincalum ridge pieces and clearing away debris from the plant limit.

Chipping & removing old cement plastered surface including racking out joints & clearing the surface for replastering & disposal of the debris as per directions within a distance of 150 m.

Dismantling and clearing away any thickness of rubble, brick, laterite in CM including disposal of debris as per directions within a distance of 150 m.

Dismantling the existing structural carefully without damaging the remaining portions including conveying and stacking at places pointed out & removal of debris if any within a lead of 150 m.

Cleaning the structural/other surface neatly at all heights, manually with suitable tools or with high pressure water jet spray (using suitable mechanical means), and scraping if required, to remove the whole accumulated dust, rust, dirt etc as per departmental instructions.

Brick work in CM 1:6 with country burnt bricks for super structure in all heights up to 25M height including all materials, labour charges and scaffolding charges excluding cost of cement etc.complete

Cement plastering with CM 1:4,12 mm thick one coat floated hard and trowelled smooth at all levels,excluding cost of cement

Providing reinforcements to RCC works with MS / Tor steel rods including all charges for conveying, straightening/uncoiling, cutting, bending, placing rods in position & tying with GI / black annealed tying wire of suitable gauge etc. complete. excluding cost of reinforcement.

Reinforced cement concrete work in 1:1½:3 nominal mix for precast cover slabs (perforated/non perforated) using 20 mm nominal size graded hard granite broken stones and M sand including all charges for form work, mixing, laying, consolidating, curing, handling, transporting, loading, unloading, keeping and fixing in position after removing the existing damaged cover slabs (if any) etc., complete but excluding cost of reinforcement works.

Supplying, Conveying, fabrication and erection of structural steel work bolted or welded at all levels as per scope drawing for trusses, purlins, louver brackets, louver runners bracings, stair cases, platforms, hand rails ladder, threaded sag rods, splices, etc. with M.S angles, channels, tees, flats, RSJs, rods, pipes and plates including cutting, welding, cleaning, erecting and painting with two coats of zinc chromate primer (one shop coat and one coat after erection) and two coats of chemical resistant enamel paint of approved quality and colour over the primer including supply of necessary MS bolts and nuts other than holding down bolts.(The structural steel material shall be of M/s. SAIl / RINL / TISCO /JINDAL make) Required gas and electrodes will be supplied free of cost by FACT at stores.

Providing non-asbestos high impact Polypropylene Reinforced Cement, 5.50 mm minimum thick, corrugated sheets (as per IS: 14871) of suitable colour as approved by Engineer-in-charge, roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required

Providing corrugated serrated adjustble ridges or hips in Non- asbestos fibre cement high impact polypropylene reinforced roofing with suitable fixing accessories or self drilling fastener and EPDM washer,etc. complete as per instructions.

Providing Polycarbonated corrugated sheets, 1.20 mm or nearest thickness of suitable colour as approved by Engineer-in-charge, fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete

Painting with one coat of zinc chromate yellow metal primer and two coats of synthetic enamel paint using approved brand & quality at all heights after cleaning the surface including cost of all paint and materials, labour charges, scaffolding charges etc.complete as per deptl instructions

Applying one coat of Epoxy Zinc Phosphate Primer of approved brand & quality at all heights after cleaning the surface including cost of primer, scaffolding charges, labour charges and all other incidental charges etc.complete as per departmental instructions at site.

Applying two coats of epoxy finish paint of approved quality and brand at all levels over the primer already done and paid separately, after cleaning the surface thoroughly as per deptl. instructions.

Painting one coat of priming coat on plastered surface (interior) with approved quality cement primer after cleaning the surface including all cost of materials, labour etc.

Distempering with oil bound distemper on new/old work one coat including finishing smoothly with sand paper.

Distempering with oil bound distemper on new/old work for succeeding coat including finishing smoothly with sand paper.

Painting two coats with ready mixed plastic emulsion paint of approved quality and colour specified over the priming coat already done and paid separately after cleaning the surface well.

Painting with one coat of “ exterior primer” of approved quality to walls after neatly cleaning the surface by removing loose paint, dirt etc.by cleaning with water, scrapping etc. at all heights including cost of all materials, labour charges, scaffolding charges etc.complete as per instructions.

Painting with one coat of Exterior emulsion Paints of approved quality and colour over the priming coat already done and paid separately after cleaning with cotton waste including cost of all materials, labour charges, scaffolding charges etc complete at all heights as per departmental instructions

Painting with one coat to old surface/succeeding coat of external emulsion of approved quality and colour after cleaning with cotton waste including cost of all materials, labour charges, scaffolding charges etc complete at all heights as per departmental instructions

Painting letters or figurs 2.5 cm, 4 cm, and 5 cm ht.Block , Roman, Italic or Indian with any kind of paint

Painting letters or figurs 6.50 cm, 8 cm, and 10 cm ht.Block , Roman, Italic or Indian with any kind of paint

Painting letters or figures above 10 cm & up to 20 cm ht. Block, Roman, Italic or Indian with any kind of paint

Collecting ,conveying and Disposal of building rubbish/ debris/similar unserviceable,dismantled or waste materials by manual/ mechanical means, including loading, transporting, unloading to approved areas for filling, spreading in layers as per directions of Engineer-in-charge (20%deduction will be made if measured loose in lorries & from stack) - For an average lead of 2 KM

K.M.Joy

K.M.Biju

JOSHY GEORGE