REPAIR TO DRAIN AND OTHER ALLIED WORK AT CHARRI CAMP AT MIL STN DHARAMSHALA

Amount

Demolition of stones of brick masonry built in cement mortar including all quoins, arches etc. but excluding ashlar facing, dressed stone work etc. complete all as specified.

Demolition of cement concrete of any description in any position not otherwise specifically provided for complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level.

M&L for Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, any description complete all as specified & directed.

M&L for PCC M-7.5 nominal mix type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified & directed.

M&L for stone walling of random rubble with best quality locally available harder stone such as granite, trap or basalt brought upto courses well bonded bedded, solidly hearted and built in cement mortar 1:6, complete all as specified & directed.

All as per item No. 7 here-in-before but except stone.

M&L brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius and built in CM 1:6.

M&L for 20mm thick plastering in cement mortar 1:4 on stone masonry surfaces or other than fair faces of brick surfaces, finished even and smooth without using extra cement, complete all as specified.

M&L for 15mm thick plastering in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

M&L for PCC M-10 nominal mix type C-2, using 40mm graded crushed stone aggregate as in surface channel and drain, complete all as specified.

M&L for Cement concrrete Type B1 1:2:4 (using 20mm aggregate) , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.

M&L precast RCC 1:2:4 type B1 as in landings, cover slab,chajjas etc.and similar articles with plain faces set in CM 1:6

M & L 75mm th PCC 1:3:6 type C-2 as in sub base, Floors, Paving, plinth protection, finished even and rough for topping layer without using extra cament complete all as specified.

M&L chequred cement concrete tiles 20cm X 20cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors incl 20mm thick screed bed or bedding layer in cement mortar1:4 for laying floor finishes, finished even and fair complete all as specified.

M&L for applying two coat of synthetic enamel paint on new decorated steel surfaces exc 10 cm width or girth including preparation of surfaces , complete all as specified and directed.

M&L for complete removal of existing treatment including washing, rubbing down and stopping of white wash / color wash/ cement base paint / synthetic enamel paint etc and preparation of surfaces of the same walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer in charge.

Dismentling wrought iron or mild steel work of such as grill/grating etc not otherwise provided for complete all as specified & directed.

S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as directed.

Krithvik Electricals (BID ID -3117683)

M/s Thakur Engineers (BID ID -3117744)

ess are electricals and electronic (BID ID -3128590)

Ms Sunil Kumar (BID ID -3116681)

Eshaan Construction Co. (BID ID -3123255)